Deutsch
EnglishControls and features -> Digital clock for your BMW 5 Series 1995-2003
76nDigital clock
Only make entries when the
Changing the time display
To change the date
vehicle is standing still – to avoid
endangering yourself or other road
users.<
Press the left side of the key.
Press the left side of the key.
To display time or date
Press the right side of the key:
The dots flash in the display.
Press.
Press the left side of the key.
Display shows:
To alter the setting:
Press the right side of the key:
The dots and the DATE display will
flash.
You can have the clock time displayed
in 12 or 24 hours.
Press on the left or right, or keep
holding down.
To alter the setting:
To change the display:
To store the input:
Press on the left or right, or keep
holding down.
Press the left side of the key.
Press the right side of the key.
If the 12-hour clock display is in use,
AM or PM appear after the time.
To store the input:
Press the right side of the key.
The clock takes leap years into account
and therefore does not have to be reset
manually.
Digital clock
77n
To start the stopwatch:
Reminder signal
Timer
You can program an hourly reminder
signal (Memo), that will, for example,
remind you of news broadcasts.
Press the left side of the key.
Press the right of the key.
Press the left side of the key.
To take an intermediate time reading:
Press.
Display shows:
Press:
Press.
MEMO OFF appears in the display for
entry and check buttons, and the tone
symbol will appear in the upper right of
the display.
A signal is then heard 15 seconds
before each hour.
Press.
The stopwatch display can be seen
counting up; the stopwatch continues
to run.
To halt the stopwatch:
Press the right side of the key.
The stopwatch is halted whenever
the ignition switch is turned back
to 0, but starts to run again when the
ignition key is turned to 1.<
78nDigital clock
To input the time:
To activate/deactivate the time:
Enter the switch-on times for the
independent ventilation system
You can enter two different switch-on
times.
After 30 minutes, the ventilation will
switch off automatically.
Press on the left or right, or keep
holding down.
Press twice.
Turning the independent
ventilation system on and off
directly
Please observe the notes for
operating the independent
ventilation system on page 102.<
To confirm the input:
The independent ventilation
function can only be called up in
ignition key position 1.<
Press the right side of the key.
The activated time is marked with an
asterisk.
Press the left side of the key.
Press the left side of the key.
Press at left/right.
Display shows:
The switch-on times remain memorized
until new inputs are made.
You can change switch-on times that
have already been memorized by
making a new time input as described
above.
Press
or
When the switch-on time is active, the
LED comes on in the MID. During actual
operation of the ventilation, the LED
flashes. The LED goes out when the
system is switched off.
press.
Press the right side of the key:
Display flashes, e.g. TIME 1.
