Deutsch
EnglishCONTROLS -> Interior equipment for your BMW 5 Series 2024-2025
Interior equipment
CONTROLS
Interior equipment
risk of property damage. Make sure that the
travel path of the respective system is clear
during programming and operation. Also fol-
low the safety information for the hand-held
transmitter.
Vehicle features and options
This chapter describes model-specific equip-
ment, systems, and functions that are currently
available, or may become available in the fu-
ture, even if they are not present in the vehicle.
Additional information:
Compatibility
Vehicle equipment, refer to page 8.
If this icon is printed on the packaging
or in the operating instructions of the
remote-controlled system, the system
is generally compatible with the integrated uni-
versal remote control.
Integrated universal remote
control
Additional questions are answered by:
Principle
▷
An authorized service center or another
qualified service center or repair shop.
The integrated universal remote control in the
interior mirror can operate remote-controlled
systems such as garage door openers, alarm
systems or locking systems.
▷
HomeLink is a registered trademark of Gentex
Corporation.
For any additional questions, contact an au-
thorized service center or another qualified
service center or repair shop.
General information
The integrated universal remote control re-
places up to three different hand-held trans-
mitters. To operate the remote control, the
buttons on the interior mirror must be pro-
grammed with the desired functions.
Operating elements on the interior
mirror
Before selling the vehicle, delete the stored
functions for the sake of security.
If possible, do not install the antenna of the
remote-controlled system near metal objects
to ensure the best possible operation.
Safety information
Warning
▷
▷
▷
Buttons, arrow 1.
LED, arrow 2.
The operation of remote-controlled systems
with the integrated universal remote control
such as the garage door may result in injury,
for example, body parts becoming jammed in
a garage door. There is a risk of injury and
Hand-held transmitter of the remote-con-
trolled system, arrow 3.
292
Interior equipment
CONTROLS
Press and hold the button on the interior
mirror for approx. 2 seconds. Perform
this procedure three times.
Programming the integrated
universal remote control
If the integrated universal remote con-
trol remains nonoperational, continue
with the special features for rolling code
radio systems.
Functional requirement
The battery of the hand-held transmitter must
be fully charged at the time of programming
to ensure an optimal range of the integrated
universal remote control.
▷
LED does not illuminate green after
60 seconds: programming not com-
pleted.
Programming individual buttons
1. Park the vehicle within range of the remote-
controlled system.
Repeat steps 3 to 5.
Special feature of the rolling code
wireless system
For systems with a rolling code radio system,
the integrated universal remote control and the
system also have to be synchronized.
2. Turn on standby state.
3. Select desired button on the interior mirror:
▷
▷
Program available button:
Press the button.
Program already assigned button:
Refer to information on synchronization in the
operating instructions of the remote-controlled
system.
Press and hold the button for approx.
20 seconds.
The LED on the interior mirror will slowly
begin flashing orange.
1. Program the desired button on the interior
mirror.
4. Hold the hand-held transmitter for the
remote-controlled system approx. 1 to
12 in/2.5 to 30 cm away from the buttons
on the interior mirror.
2. Locate and press the synchronizing button
on the remote-controlled system such as
on the garage door.
You have approx. 30 seconds for the next
step.
The required distance depends on the
hand-held transmitter.
Synchronizing is easier with the aid of a
second person.
5. Press and hold the button on the hand-held
transmitter.
3. Press and hold the programmed button on
the interior mirror for approx. 3 seconds.
Canada: if programming with the hand-held
transmitter was interrupted, hold down the
interior mirror button and repeatedly press
and release the hand-held transmitter but-
ton for 2 seconds.
If necessary, repeat this step up to three
times in order to end synchronization. Once
synchronization is complete, the program-
med function will be carried out.
6. The LED can illuminate in different ways:
Operation
After programming, the remote-controlled sys-
tem can be operated with the button on the
interior mirror.
▷
The LED illuminates green: program-
ming completed.
Release button.
▷
The LED flashes green rapidly: the
hand-held transmitter was detected but
programming is not complete.
293
Interior equipment
CONTROLS
Press and hold the desired button of the re-
mote-controlled system within range until the
function is triggered.
Sockets
Principle
The socket can be used for electronic devi-
ces when the standby or drive-ready state is
switched on.
The LED on the interior mirror is continuously
illuminated green during the transmission of
the radio signal.
Deleting a button assignment
The button assignment cannot be deleted indi-
vidually.
General information
The total load of all sockets must not exceed
140 watts at 12 volts.
Press and hold the two outer buttons on
the interior mirror simultaneously for approxi-
mately 10 seconds until the LED flashes green
rapidly.
Do not damage the socket by using unsuitable
connectors.
Safety information
All stored button assignments will be deleted.
Warning
Sun visor
Devices and cables in the unfolding area of
the airbags such as portable navigation devi-
ces can hinder the unfolding of the airbag or
be thrown around in the car's interior while
unfolding. There is a risk of injury and risk
of property damage. Make sure that devices
and cables are not in the airbag's area of
unfolding.
Glare shield
Fold the sun visor down or up.
Glare shield from the side
Folding the sun visor out
1. Fold the sun visor down.
2. Detach it from the holder and swing it to-
ward the side window.
Warning
Battery chargers that charge the vehicle bat-
tery via sockets or cigarette lighters in the
vehicle may overload or damage the 12 V
electrical system. There is a risk of injury
and risk of property damage. Only connect
battery chargers for the vehicle battery to the
jump-start terminals in the engine compart-
ment.
Folding the sun visor in
Proceed in the reverse order to close the sun
visor.
Vanity mirror
A vanity mirror is located in the sun visor be-
hind a cover.
Warning
If metal objects fall or are plugged into elec-
tronic interfaces, e.g., sockets or USB ports,
these objects can cause a short circuit and
destroy the interface. There is a risk of injury
294
Interior equipment
CONTROLS
and risk of property damage. Make sure to
prevent metal objects from falling or being
plugged into electronic interfaces. Insert the
cigarette lighter or socket cover again after
using the socket.
In the front center console
Front center armrest
Two USB ports are located in the center con-
sole.
Properties:
▷
▷
USB port Type C.
For charging mobile devices and for data
transfer.
The center armrest contains a socket.
▷
Charge current: maximum 3 A per port.
In the rear center console
USB port
General information
Follow the information regarding the connec-
tion of mobile devices to the USB port in the
section on USB connections.
Additional information:
USB connection, see Owner's Manual for Nav-
igation, Entertainment, Communication;
Two USB ports are located in the center con-
sole in the rear passenger compartment.
Safety information
Properties:
▷
▷
▷
USB port Type C.
Warning
For charging mobile devices.
Charge current: maximum 3 A per port.
If metal objects fall or are plugged into elec-
tronic interfaces, e.g., sockets or USB ports,
these objects can cause a short circuit and
destroy the interface. There is a risk of injury
and risk of property damage. Make sure to
prevent metal objects from falling or being
plugged into electronic interfaces. Insert the
cigarette lighter or socket cover again after
using the socket.
295
Interior equipment
CONTROLS
Attaching optional accessories
1. Slide the cover down.
Travel & Comfort system
General information
The front seat backrests have mounts and var-
ious connection options:
▷
Mounts for attaching optional accessories,
e.g., universal holders for tablets or coat
hangers.
▷
USB ports.
Properties of the USB ports:
▷
▷
▷
USB port Type C.
2. Mount the optional accessories, refer to As-
sembly Instructions.
For charging mobile devices.
Charge current: maximum 3 A / 45 W per
seat.
Wireless charging tray
For more information, contact an authorized
service center or another qualified service cen-
ter or repair shop.
Principle
The wireless charging tray is used to wirelessly
charge Qi-certified smartphones.
Overview
General information
Quick charging functions are supported de-
pending on the smartphone.
The integrated fan cools the device to be
charged.
When inserting the smartphone to be charged,
make sure that there is nothing between the
smartphone to be charged and the wireless
charging tray.
The mounts for attaching optional accessories
are located behind the marked covers.
The charging process is shown by the
charge indicator on the control display.
The USB ports are located behind the marked
covers.
Safety information
Warning
When charging a Qi-compatible device in the
wireless charging tray, any metal objects on
the tray together with the device can become
very hot. Storage media or electronic cards,
e.g., chip cards, cards with magnetic strips, or
cards for transmitting signals, may not func-
296
Interior equipment
CONTROLS
tion correctly when placed together on the
tray with the device. There is a risk of injury
and risk of property damage. When charging
mobile devices, make sure there are no ob-
jects on the tray together with the device.
Inserting a smartphone
Place the smartphone in the middle of the tray
on the driver's side, with the display facing up.
Forgotten warning
General information
A warning may be issued if a Qi-certified
smartphone was forgotten in the wireless
charging tray when leaving the vehicle.
Overview
Tray in the center console:
The forgotten warning is displayed in the in-
strument cluster.
Enable/Disable Forgotten Warning
1.
Apps menu
2. "Vehicle"
3. "System settings"
4. "Wireless charging tray"
5. "Mobile phone reminder"
1
Storage area
Fan
2
System limits
Functional requirements
The charge current may be reduced or charg-
ing may be temporarily interrupted in the wire-
less charging tray in the following situations:
▷
The smartphone to be charged must be Qi-
certified.
▷
▷
▷
Standby state is switched on.
Charging function is turned on.
▷
▷
▷
Due to excessive temperatures on the tray
and smartphone.
The smartphone cannot exceed maximum
dimensions of approx. 6.69 x 3.34 x
0.7 in/170 x 85 x 18 mm.
If there are objects between the smart-
phone and wireless charging tray.
If storage media or electronic cards,
e.g., chip cards, cards with magnetic
stripes, or cards for signal transmission, are
located between the smartphone and wire-
less charging tray.
▷
▷
Protective sleeves and covers must be suit-
able for wireless charging.
The smartphone to be charged is located
in the center of the tray. The smartphone
display is facing up.
▷
▷
Due to protective sleeves and covers that
exceed a thickness of 0.07 in/2 mm
Activating/deactivating charging
1.
Due to protective sleeves and covers made
of unsuitable material, e.g., with magnetic
parts.
Apps menu
2. "Vehicle"
3. "System settings"
4. "Wireless charging tray"
5. "Wireless charging"
297
Interior equipment
CONTROLS
▷
▷
Due to add-on parts for the smartphone,
e.g., holders.
be verified in regular intervals, especially when
borders are frequently crossed.
By configuring the smartphone settings,
e.g., for charging. Follow the instructions
given on the control display and smart-
phone, as applicable.
Other users and occupants of the vehicle must
be informed about the system. In addition, in-
formation about the system is required when
handing off the vehicle.
Data transfer and data storage
Whether recording data will be sent or stored
depends on the recording function.
Interior camera
Principle
Interior camera:
The interior camera can be used to record the
vehicle interior.
▷
Data transfer to a mobile device, connec-
tion to the vehicle via WLAN.
▷
Data is saved to the vehicle and assigned
to the BMW ID or driver profile.
General information
The interior camera can provide the following
functions:
Remote Inside View:
▷
Sending data to a mobile device via the My
BMW App, connected with ConnectedDrive
account.
▷
Interior camera.
You can record, save and display media.
Remote Inside View.
▷
▷
Data is saved to the My BMW App and,
after data is sent, to the mobile device.
The vehicle interior can be recorded using
the My BMW App.
Anti-theft recorder:
▷
Anti-theft recorder.
▷
Sending data to a mobile device via the My
BMW App, connected with ConnectedDrive
account.
If the alarm system is triggered, the vehicle
interior is automatically recorded. Record-
ings can also be played using the My BMW
App.
▷
Data is stored in the vehicle and after the
data transfer in the mobile device.
More information on the scope and content of
data processing is available on the Internet in
the ConnectedDrive privacy notices/service de-
scriptions.
Data protection
General information
The permissibility of recording and using re-
cordings is contingent upon the statutory regu-
lations of the country in which the system is to
be used. The user is responsible for the use of
the system and compliance with the respective
regulations.
Occupying the seats
The interior camera is also used for the detec-
tion of occupied seats.
When all doors are closed, the interior camera
switches on automatically on a regular basis.
This system analyzes the vehicle interior to
detect which seats are occupied. No media
recordings are made in the process. Two in-
frared light sources next to the camera lens
illuminate while the interior camera is active.
The vehicle manufacturer recommends that
you verify there are no statutory or regulatory
restrictions on using the system in your region
or country prior to initial use. In addition, the
laws with respect to use of the system should
298
Interior equipment
CONTROLS
Depending on the lighting conditions, the infra-
red light sources may be visible.
Activating/deactivating interior
camera
Prior to the first use of the interior camera,
the recording function and, if necessary, data
transfer must be activated. To do this, confirm
the query on the control display. Additional
activation may be required for some system
functions.
Functional requirements
Interior camera:
▷
Privacy Policy accepted.
Data protection, refer to page 69.
The camera is activated.
▷
Follow applicable legal regulations.
To transfer recordings to mobile devices:
The recording function or data transfer can be
deactivated or activated.
▷
▷
Data transfer is activated.
Mobile device is connected to the vehicle
via WLAN.
1.
Apps menu
2. "All apps"
Remote Inside View/Anti-theft recorder:
3. "Interior camera"
4. "Settings"
▷
▷
Privacy Policy accepted.
My BMW App is installed on the mobile de-
vice.
5. Select the desired setting.
▷
My BMW App is linked with the Connected-
Drive account.
Interior camera
▷
▷
Vehicle is parked and locked.
Recording mode
Anti-theft recorder: equipped with alarm
system.
Recording
mode
Function
Ensure that the faces of occupants are visible
and are not partially or completely covered, for
instance by face masks.
"Single
photo"
Shortly after triggering, a
photo will be taken.
Overview
"Smile"
When the system detects a
smile, a picture will be taken.
"Self-timer
(3 sec.)"
After the timer has expired, a
photo will be taken.
"Burst
mode"
Shortly after triggering, a ser-
ies of pictures will be taken.
Take picture
1.
Apps menu
The interior camera is located on the head-
liner.
2. "All apps"
3. "Interior camera"
4. "Photo"
Additional information:
Around the headliner, refer to page 35.
5. Select desired recording mode.
6. Triggering a photo.
299
Interior equipment
CONTROLS
Depending on the selected recording mode,
the photo occurs shortly after the triggering,
when a smile is recognized or the timer has
elapsed.
4. "Settings"
5. Select the desired setting.
An individual gesture can be assigned for re-
cordings with the interior camera.
For burst shots, the series of pictures will be
displayed as a preview.
Remote Inside View
Recordings of the vehicle interior can be
played on a mobile device using the My BMW
App in order to check the vehicle interior, e.g.,
for forgotten objects.
Recording video
1. "MENU"
2. "All apps"
3. "Interior camera"
4. "Video"
The function is not suitable for monitoring peo-
ple or animals left behind.
5. Start video recording.
You can only record video for a certain time.
Anti-theft recorder
If the alarm system is triggered, the vehicle in-
terior is automatically recorded. The My BMW
App issues a notification when recordings are
being taken. The recording can be shown on a
mobile device.
Displaying and managing
recordings
Saved recordings can be displayed, transferred
and deleted in the vehicle.
Up to three recordings can be saved to the
vehicle and synchronized with the My BMW
App. If the vehicle is reset to factory settings,
recordings saved to the vehicle are deleted.
With some national-market versions, record-
ings are only shown on the control display
when the vehicle speed is less than approx.
2 mph/3 km/h for safety reasons.
1.
Apps menu
2. "All apps"
3. "Interior camera"
4. "Gallery"
5. Select the desired recording.
6. Select the desired setting.
Scan the QR code shown on the control dis-
play to send recordings to a mobile device.
The recording is transferred when the pop-up
on the mobile device is opened. The mobile
device must be connected to the vehicle via
WLAN.
Settings
1.
Apps menu
2. "All apps"
3. "Interior camera"
300
