Deutsch
EnglishCONTROLS -> Displays for your BMW X1 2016-2022
Displays
CONTROLS
Displays
available in your vehicle, for instance, due to the
selected options or country versions. This also
applies to safety-related functions and systems.
When using these functions and systems, the
applicable laws and regulations must be ob‐
served.
Vehicle features and
options
This chapter describes all standard, country-spe‐
cific and optional features offered with the series.
It also describes features that are not necessarily
Overview, instrument cluster
1
2
3
4
Speedometer
Driving dynamics systems
Messages, for instance Check Control
Tachometerꢀꢁ123
5
6
7
Electronic displays
Fuel gaugeꢀꢁ123
Reset milesꢀꢁ124
Current consumption
119
Online Edition for Part no. 01402631131 - X/19
Displays
CONTROLS
Airbag system
Airbag system and belt tensioner may
Check Control
not be working.
Concept
The Check Control system monitors functions in
the vehicle and notifies you of malfunctions in
the monitored systems.
Have the vehicle checked immediately
by a dealer's service center or another qualified
service center or repair shop.
Parking brake
General information
A Check Control message is displayed as a com‐
bination of indicator or warning lights and text
messages in the instrument cluster and in the
Head-up Display.
The parking brake is set.
For releasing the parking brake, refer to
page 103.
In addition, an acoustic signal may sound and a
text message may appear on the Control Display.
Brake system
Braking system impaired. Continue to
drive moderately.
Indicator/warning lights
General information
The indicator/warning lights in the instrument
cluster can light up in a variety of combinations
and colors.
Have the vehicle checked immediately
by a dealer's service center or another
qualified service center or repair shop.
Approach control warning
Several of the lights are checked for proper func‐
tioning and light up temporarily when the engine
is started or the ignition is switched on.
Indicator light illuminates: advance warn‐
ing is issued, for example when there is
the impending danger of a collision or
the distance to the vehicle ahead is too small.
Red lights
Increase the distance.
Indicator light flashes: acute warning of the immi‐
nent danger of a collision when the vehicle ap‐
proaches another vehicle at a relatively high dif‐
ferential speed.
Safety belt reminder
Safety belt on the driver's side is not
buckled. For some country versions: pas‐
senger belt is not worn or objects are de‐
tected on the front passenger seat.
Intervene by braking or make an evasive maneu‐
ver.
Indicator light flashes or is illuminated: safety belt
on the driver or passenger side is not buckled.
The safety belt reminder can also be activated if
objects are placed on the front passenger seat.
Person warning
Symbol in the instrument cluster.
Make sure that the safety belts are positioned
correctly.
If a collision with a detected person is im‐
minent, the symbol lights up and a signal
sounds.
120
Online Edition for Part no. 01402631131 - X/19
Displays
CONTROLS
DSC Dynamic Stability Control is
deactivated or DTC Dynamic Traction
Control is activated
Orange lights
Active Cruise Control
DSC is deactivated or DTC is activated.
The number bars shows the selected
distance from the vehicle driving ahead.
DSC, refer to page 161, and DTC, refer
to page 163.
Camera-based cruise control with
Stop&Go function, ACC, refer to page 167.
Flat Tire Monitor FTM
Vehicle detection, Active Cruise Control
The FTM signals a loss of tire inflation
pressure in a tire.
Indicator light illuminates: a vehicle has
been detected ahead of you.
Reduce your speed and stop cautiously.
Avoid sudden braking and steering maneuvers.
Indicator light flashes: the conditions are
not adequate for the system to work.
Run-flat tires, refer to page 148.
The system was deactivated but applies the
brakes until the driver actively resumes control of
the vehicle by pressing on the brake pedal or ac‐
celerator pedal.
Tire Pressure Monitor TPM
The indicator light illuminates: the Tire
Pressure Monitor reports a low tire infla‐
tion pressure or a flat tire. Follow the in‐
formation in the Check Control message.
Yellow lights
The indicator light flashes and is then illuminated
continuously: flat tires or tire pressure losses
cannot be detected.
Anti-lock Braking System ABS
The Brake Assistant function may not
activate. Avoid abrupt braking. Take the
longer braking distance into account.
▷ Interference caused by systems or devices
with the same radio frequency: after leaving
the area of the interference, the system auto‐
matically becomes active again.
Have the system immediately checked
by a dealer's service center or another
qualified service center or repair shop.
▷ TPM was unable to complete the reset. Re‐
set the system again.
DSC Dynamic Stability Control
▷ A wheel without TPM wheel electronics is
mounted: have it checked by a dealer’s serv‐
ice center or another qualified service center
or repair shop as needed.
The indicator light flashes: DSC controls
the drive and braking forces. The vehicle
is stabilized. Reduce speed and modify
your driving style to the driving circumstances.
▷ Malfunction: have the system checked by a
dealer’s service center or another qualified
service center or repair shop.
The indicator light lights up: DSC has malfunc‐
tioned.
Tire Pressure Monitor TPM, refer to page 143.
Have the system checked by a dealer's service
center or another qualified service center or re‐
pair shop.
Steering system
DSC, refer to page 161.
Steering system may not be working.
121
Online Edition for Part no. 01402631131 - X/19
Displays
CONTROLS
Have the system checked by a dealer's service
center or another qualified service center or re‐
pair shop.
Front fog lights
Front fog lights are switched on.
Front fog lights, refer to page 138.
Emissions
High-beam Assistant
▷ The warning light lights up:
High-beam Assistant is switched on.
Emissions are deteriorating. Have the
vehicle checked as soon as possible.
High beams are switched on and off au‐
tomatically depending on the traffic sit‐
▷ The warning light flashes under certain cir‐
cumstances:
uation.
High-beam Assistant, refer to page 137.
This indicates that there is excessive misfiring
in the engine.
Cruise control
Reduce the vehicle speed and have the sys‐
tem checked immediately; otherwise, serious
engine misfiring within a brief period can seri‐
ously damage emission control components,
in particular the catalytic converter.
The system is switched on. It maintains
the speed that was set using the control
elements on the steering wheel.
Blue lights
Socket for Onboard Diagnosis, refer to
page 260.
High beams
Lane departure warning
High beams are switched on.
High beams, refer to page 104.
System is switched on and under certain
circumstances warns if a detected lane is
left without flashing beforehand.
Hiding Check Control messages
Lane departure warning, refer to page 157.
Green lights
Turn signal
Turn signal switched on.
Unusually rapid flashing of the indicator
light indicates that a turn signal bulb has
failed.
Press the button on the turn signal lever.
Turn signal, refer to page 103.
Continuous display
Parking lights, headlight
Some Check Control messages are displayed
continuously and are not cleared until the mal‐
function is eliminated. If several malfunctions oc‐
cur at once, the messages are displayed consec‐
utively.
Parking lights or headlights are switched
on.
Parking lights/low beams, headlight con‐
trol, refer to page 135.
122
Online Edition for Part no. 01402631131 - X/19
Displays
CONTROLS
The messages can be hidden for approx. 8 sec‐
onds. After this time, they are displayed again
automatically.
Display additional information about the
Check Control message in the Integrated
Owner's Manual.
▷ "Service request"
Temporary display
Contact a dealer’s service center or another
qualified service center or repair shop.
Some Check Control messages are hidden auto‐
matically after approx. 20 seconds. The Check
Control messages are stored and can be dis‐
played again later.
▷ "BMW Roadside Assistance"
Contact Roadside Assistance.
Messages after trip completion
Certain messages displayed while driving are dis‐
played again after the ignition is switched off.
Displaying stored Check Control
messages
Via iDrive:
1. "My Vehicle"
Fuel gauge
2. "Vehicle status"
3.
"Check Control"
An arrow beside the fuel pump
symbol shows which side of the
vehicle the fuel filler flap is on.
4. Select the SMS text message.
Display
Vehicle tilt position may cause the
display to vary.
Check Control
Follow the information on refueling.
At least one Check Control message is
displayed or stored.
The yellow indicator light illuminates,
once the fuel reserve is reached.
SMS text messages
SMS text messages in combination with a sym‐
bol in the instrument cluster explain a Check
Control message and the meaning of the indica‐
tor/warning lights.
Tachometer
Always avoid engine speeds in the red warning
field. In this range, the fuel supply is reduced to
protect the engine.
Supplementary SMS text messages
Additional information, such as on the cause of
an error or the required action, can be called up
via Check Control.
Odometer and trip
odometer
With urgent messages the added text will be au‐
tomatically displayed on the Control Display.
Display
Depending on the Check Control message, the
following functions can be selected.
▷ Odometer, arrow 1.
▷ Trip odometer, arrow 2.
▷ "Owner's Manual"
123
Online Edition for Part no. 01402631131 - X/19
Displays
CONTROLS
Showing/resetting miles
Time
Date
Press the button.
The time is displayed in the in‐
strument cluster.
▷ When the ignition is switched
off, the time, the external tem‐
perature and the odometer are
displayed.
The time can be set on the Con‐
trol Display.
▷ When the ignition is switched on, the trip od‐
ometer is reset.
The date is displayed in the in‐
strument cluster.
External temperature
The date can be set on the Con‐
trol Display.
General information
If the indicator drops to +37 ℉/+3 ℃ or lower, a
signal sounds.
A Check Control message is displayed.
There is an increased risk of ice on roads.
Range
General information
When the remaining range is low:
Safety information
▷ A Check Control message is displayed briefly.
Warning
▷ The remaining range is shown on the On‐
board Computer.
Even at temperatures above +37 ℉/+3 ℃
there can be a risk of icy roads, for instance on
bridges or shady sections of the road. There is
a risk of accident. Modify your driving style to
the weather conditions at low temperatures.
▷ With a dynamic driving style, for instance fast
cornering, the engine function is not always
ensured.
The Check Control message appears continu‐
ously below a range of approx. 30 miles/50 km.
Display
The external temperature is dis‐
played in the instrument cluster.
Safety information
NOTICE
With a driving range of less than
30 miles/50 km the engine may no longer have
sufficient fuel. Engine functions are not en‐
sured anymore. There is a risk of damage to
property. Refuel promptly.
124
Online Edition for Part no. 01402631131 - X/19
Displays
CONTROLS
Display
Energy recovery
The current range is displayed in
the instrument cluster.
Display
In coasting overrun mode the ki‐
netic energy of the vehicle is con‐
verted to electrical energy. The
vehicle battery is partially charged
and fuel consumption can be re‐
Current consumption
duced.
Instrument cluster
Displays the current fuel con‐
Service notifications
sumption. Check whether you are
currently driving in an efficient and
environmentally-friendly manner.
Concept
The function displays the service notifications
and the corresponding maintenance scopes.
Instrument cluster with
enhanced features
General information
After the ignition is switched on the instrument
cluster briefly displays available driving distance
or time to the next scheduled maintenance.
Displays the current fuel con‐
sumption. Check whether you are
currently driving in an efficient and
environmentally-friendly manner.
A service advisor can read out the current serv‐
ice notifications from your vehicle key.
Displaying the current
consumption
Display
Detailed information on service
notifications
More information on the type of service required
may be displayed on the Control Display.
Depending on your vehicle's optional features,
the current consumption can also be displayed
as bar in the instrument cluster.
Via iDrive:
Via iDrive:
1. "My Vehicle"
1. "My Vehicle"
2. "iDrive settings"
3. "Displays"
2. "Vehicle status"
3. Move the Controller to the left.
4. "Instrument panel"
5. "Additional indicators"
4.
"Service required"
Maintenance and service measures and le‐
gally mandated inspections are displayed.
5. Select an entry to call up detailed information.
125
Online Edition for Part no. 01402631131 - X/19
Displays
CONTROLS
Symbols
Gear shift indicator
Symbols
Description
Concept
The system recommends the most efficient gear
for the current driving situation.
No service is currently required.
The time for recommended
maintenance or a legally man‐
dated inspection is approaching.
General information
Depending on the vehicle equipment and coun‐
try version, the gear shift indicator is active in the
manual mode of the Steptronic transmission and
with manual transmission.
The time for recommended
maintenance has already
passed.
Suggestions to shift up or down are displayed in
the instrument cluster.
Entering appointment dates
Enter the dates for the mandatory vehicle in‐
spections.
On vehicles without a gear shift indicator, the en‐
gaged gear is displayed.
Make sure that the vehicle's date and time are
set correctly.
Steptronic transmission:
displaying
Via iDrive:
Example
Description
1. "My Vehicle"
Efficient gear is set.
2. "Vehicle status"
3. Move the Controller to the left.
4.
"Service required"
Shift into efficient gear.
5. "Vehicle inspection"
6. "Date:"
7. Select the desired setting.
Speed Limit Info
Automatic Service Request
Data regarding the service status or legally man‐
dated vehicle inspections is automatically trans‐
mitted to your dealer’s service center before your
vehicle is due for service.
Speed Limit Info
Concept
Speed Limit Info shows the current maximum
permitted speed in the instrument cluster.
You can check when your dealer’s service center
was notified.
Via iDrive:
General information
The camera in the area of the interior mirror de‐
tects traffic signs at the edge of the road as well
as overhead sign posts. Traffic signs with extra
symbols for wet road conditions, etc., are also
detected and compared with the vehicle's on‐
1. "My Vehicle"
2. "Vehicle status"
3. Move the Controller to the left.
4.
"Teleservice Call"
126
Online Edition for Part no. 01402631131 - X/19
Displays
CONTROLS
board data, such as from the rain sensor, and will
be displayed depending on the situation.
Display
With the navigation system, the system takes
into account the information stored in the naviga‐
tion data and also displays speed limits present
on routes without signs.
General information
Speed Limit Info is permanently displayed in the
instrument cluster.
Without a navigation system, the system is sub‐
ject to limitations imposed by technology. Traffic
signs with speed limitations are detected and
displayed only. Speed limitations due to entering
or exiting towns, highway signs, etc. are not dis‐
played. Speed limits with extra text characters
are always displayed.
Speed Limit Info
The last speed limit detected.
Without a navigation system the
traffic signals are grayed out after
curves or longer stretches of
roadway.
With navigation system:
Safety information
Speed Limit Info not available.
Warning
The system cannot serve as a substitute for the
driver’s personal judgment in assessing visibility
and traffic situation. There is a risk of accident.
Adjust driving style to traffic conditions. Watch
traffic closely and actively intervene where ap‐
propriate.
Without navigation system:
No speed limit or cancellation de‐
tected.
Speed Limit Info can also be displayed in the
Head-up Display.
Overview
Camera
System limits
The system may not be fully functional and may
provide incorrect information in the following sit‐
uations:
▷ In heavy fog, rain or snowfall.
▷ When signs are fully or partially concealed by
objects, stickers or paint.
▷ When driving very close to the vehicle in front
of you.
▷ When driving toward bright lights or strong
reflections.
The camera is installed near the interior mirror.
Keep the windshield in front of the interior mirror
clean and clear.
▷ When the windshield in front of the interior
mirror is fogged over, dirty or covered by a
sticker, etc.
▷ In the event of incorrect detection by the
camera.
127
Online Edition for Part no. 01402631131 - X/19
Displays
CONTROLS
▷ If the speed limits stored in the navigation
system are incorrect.
Activating a list and adjusting
the setting
▷ In areas not covered by the navigation sys‐
tem.
▷ When roads differ from the navigation, such
as due to changes in road routing.
▷ When passing buses or trucks with a speed
sticker.
▷ If the traffic signs are non-conforming.
▷ During calibration of the camera immediately
after vehicle delivery.
On the right side of the steering wheel, turn the
thumbwheel to activate the corresponding list.
▷ When signs that are valid for a parallel road
are detected.
1. Turn the thumbwheel and select the desired
setting.
Selection lists
2. Press the thumbwheel.
General information
Display
Depending on your vehicle's equipment, the fol‐
lowing can be displayed or operated using the
buttons and the thumbwheel on the steering
wheel and via the displays in the instrument clus‐
ter and the Head-up Display:
▷ Current audio source.
▷ Phone redial.
▷ Turn on voice activation system.
Depending on the equipment version, the list in
the instrument cluster may differ from the illus‐
tration.
Onboard Computer
Concept
The Onboard Computer displays different vehi‐
cle data in the instrument cluster, such as aver‐
age values.
128
Online Edition for Part no. 01402631131 - X/19
Displays
CONTROLS
Calling up information on the Info Selecting information
Display
You can select what information from the On‐
board Computer is to be displayed on the Info
Display of the instrument cluster.
Via iDrive:
1. "My Vehicle"
2. "iDrive settings"
3. "Displays"
4. "Instrument panel"
5. Select the desired setting.
Press the button on the turn signal lever.
Information is displayed in the Info Display of the
instrument cluster. Pressing the button repeat‐
edly displays additional information.
Indication in the Info Display
The information from the On‐
board Computer is shown in the
Info Display in the instrument
cluster.
Information at a glance
Repeatedly pressing the button on the turn sig‐
nal lever calls up the following information in the
Info Display:
Information in detail
Range
Displays the estimated cruising range available
with the remaining fuel.
▷ Range.
▷ Average consumption, fuel.
▷ Average consumption since delivery from the
factory.
The range is calculated based on your driving
style over the last 20 miles/30 km.
▷ Current consumption, fuel.
▷ Average speed.
Average consumption
▷ Date.
The average consumption is calculated for the
period while the engine is running.
▷ Engine temperature display.
▷ Vehicle speed.
The average consumption is calculated for the
distance traveled since the last reset by the On‐
board Computer.
▷ Depending on the equipment, the time of ar‐
rival.
When destination guidance is activated in the
navigation system.
Average speed
▷ Depending on the equipment, the distance to
destination.
Periods in which the vehicle is parked with the
engine manually stopped are not included in the
calculation of the average speed.
When destination guidance is activated in the
navigation system.
▷ ECO PRO bonus range.
129
Online Edition for Part no. 01402631131 - X/19
Displays
CONTROLS
Resetting average values
Distance to destination
Depending on the vehicle equipment, the dis‐
tance remaining to the destination is displayed if
a destination is entered in the navigation system
before the trip is started.
The distance to the destination is adopted auto‐
matically.
Time of arrival
Depending on the vehicle equip‐
ment, the estimated time of arrival
is displayed if a destination is en‐
tered in the navigation system be‐
fore the trip is started.
Press and hold the button on the turn signal
lever.
The average consumption since delivery from
the factory cannot be reset.
The time must be correctly set.
Engine temperature display
Onboard Computer on the
Control Display
Concept
Depending on the vehicle equipment, the current
engine temperature is displayed, based on a
combination of the coolant temperature and en‐
gine oil temperature. As soon as the optimum
operating temperature has been attained, the in‐
dicator is in the center position.
Concept
The Onboard Computer displays different vehi‐
cle data on the Control Display, such as average
values.
General information
General information
Two types of Onboard Computers are available
on the Control Display:
If the engine oil or coolant, and thus the engine,
become too hot, a Check Control message is
displayed too.
▷ "Onboard info": average values, such as the
consumption, are displayed. The values can
be reset individually.
To check the coolant level, refer to page 257.
Display
▷ "Trip computer": the values deliver an over‐
view of a specific route and can be reset as
often as necessary.
Calling up the Onboard Computer or
trip computer
Via iDrive:
1. "My Vehicle"
2. "Driving information"
3. "Onboard info" or "Trip computer"
130
Online Edition for Part no. 01402631131 - X/19
Displays
CONTROLS
Via the Driving Dynamics Control
Resetting the Onboard Computer
Via iDrive:
1. Activate SPORT.
2. "Sport displays"
1. "My Vehicle"
2. "Driving information"
3. "Onboard info"
4. "Consumption" or "Speed"
5. "OK"
Vehicle state
General information
The following vehicle and environment data is
evaluated:
Resetting the trip computer
Via iDrive:
▷ Engine temperature.
▷ External temperature.
1. "My Vehicle"
▷ Tire temperature and tire inflation pressure.
2. "Driving information"
3. "Trip computer"
Tire temperature and tire filling pressure are de‐
termined while driving.
4. Move the Controller to the left, if needed.
Checking vehicle state
Via iDrive:
▷
▷
"Reset": all values are reset.
"Automatic reset": all values are reset
approx. 4 hours after the vehicle has
come to a standstill.
1. "My Vehicle"
2. "Technology in action"
5. If necessary, "OK"
3.
"Vehicle and surroundings"
Via the Driving Dynamics Control
Sport displays
1. Activate SPORT.
2. "Sport displays"
Concept
On the Control Display, sport instruments can be
displayed, and the vehicle state can be checked
before the use of the SPORT program.
Speed warning
Concept
A speed limit can be set that when reached will
cause a warning to be issued.
Sport instruments
General information
On the Control Display, values for power and tor‐
que are displayed.
General information
The warning is repeated if the vehicle speed ex‐
ceeds the set speed limit again, after it has drop‐
ped below it by 3 mph/5 km/h.
Displaying sport instruments
Via iDrive:
1. "My Vehicle"
2. "Technology in action"
3.
"Sports instruments"
131
Online Edition for Part no. 01402631131 - X/19
Displays
CONTROLS
Adjusting
Overview
Via iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. "Speed warning"
4. "Warning at:"
5. Turn the Controller until the desired speed is
displayed.
6. Press the Controller.
Switching on/off
Via iDrive:
Activating/deactivating
Via iDrive:
1. "My Vehicle"
1. "My Vehicle"
2. "iDrive settings"
3. "Displays"
2. "Vehicle settings"
3. "Speed warning"
4. "Speed warning"
4. "Head-Up Display"
5. "Head-Up Display"
Setting your current speed as
the speed warning
Via iDrive:
Display
For an overview,
1. "My Vehicle"
The following information is displayed on the
Head-up Display:
2. "Vehicle settings"
3. "Speed warning"
4. "Select current speed"
▷ Vehicle speed.
▷ Navigation instructions.
▷ Check Control messages.
▷ Selection list from the instrument cluster.
▷ Driver assistance systems.
Head-up Display
Some of this information is only displayed briefly
as needed.
Concept
This system projects important information into
the driver's field of vision, for instance the speed.
Selecting displays in the Head-up
Display
Via iDrive:
The driver can quickly absorb information and
concentrate on the traffic situation.
1. "My Vehicle"
2. "iDrive settings"
3. "Displays"
4. "Head-Up Display"
132
Online Edition for Part no. 01402631131 - X/19
Displays
CONTROLS
5. "Displayed information"
Setting the rotation
6. Select the desired setting.
The screen of the Head-up Display can be ro‐
tated around its own axis.
Settings are stored for the profile currently used.
Via iDrive:
Setting the brightness
The brightness is automatically adjusted to the
ambient brightness.
1. "My Vehicle"
2. "iDrive settings"
3. "Displays"
The basic setting can be adjusted manually.
Via iDrive:
4. "Head-Up Display"
5. "Rotation"
1. "My Vehicle"
2. "iDrive settings"
3. "Displays"
6. Turn the Controller until the desired setting is
selected.
7. Press the Controller.
4. "Head-Up Display"
5. "Brightness"
Settings are stored for the profile currently used.
Display visibility
The visibility of the displays in the Head-up Dis‐
play is influenced by the following factors:
6. Turn the Controller until the desired bright‐
ness is set.
7. Press the Controller.
▷ Seat position.
When the low beams are switched on, the
brightness of the Head-up Display can be addi‐
tionally influenced using the instrument lighting.
▷ Objects on the cover of the Head-up Display.
▷ Sunglasses with certain polarization filters.
▷ Wet roads.
Settings are stored for the profile currently used.
▷ Unfavorable light conditions.
Adjusting the height
Via iDrive:
If the image is distorted, have the basic settings
checked by a dealer’s service center or another
qualified service center or repair shop.
1. "My Vehicle"
2. "iDrive settings"
3. "Displays"
Follow the instructions for cleaning the Head-up
Display, refer to page 279.
4. "Head-Up Display"
5. "Height"
Special windshield
The windshield is part of the system.
6. Turn the Controller until the desired height is
reached.
The shape of the windshield makes it possible to
display a precise image.
7. Press the Controller.
A film in the windshield prevents double images
from being displayed.
Settings are stored for the profile currently used.
The height of the Head-up Display can also be
stored using the memory function, refer to
page 88.
For this reason, it is strongly suggested to have
the special windshield replaced by a dealer’s
service center or another qualified service center
or repair shop, if necessary.
133
Online Edition for Part no. 01402631131 - X/19
Displays
CONTROLS
Vehicle status
General information
The status can be displayed and actions per‐
formed for several systems.
Opening the vehicle status
Via iDrive:
1. "My Vehicle"
2. "Vehicle status"
Information at a glance
Symbols
Description
"Flat Tire Monitor": status of the
Flat Tire Monitor FTM, refer to
page 148.
"Tire Pressure Monitor": status
of the Tire Pressure Monitor
TPM, refer to page 143.
"Engine oil level": Electronic en‐
gine oil level check, refer to
page 253.
"Check Control": displaying
stored Check Control mes‐
"Service required": displaying
service notifications, refer to
"Teleservice Call": Service Re‐
quest.
134
Online Edition for Part no. 01402631131 - X/19
