Deutsch
EnglishDriving -> ISOFIX mountings and child seats for your Citroen C5 Aircross 2017-2025
Safety
ISOFIX child seats are fitted with two latches
which are secured on the two rings A.
Some seats also have an upper strap which is
attached to ring B.
"ISOFIX" mountings
The seats, shown below, are fitted with ISOFIX
compliant mountings:
To secure the child seat to the TOP TETHER:
F remove and stow the head restraint before
installing the child seat on the seat (refit it
once the child seat has been removed),
F pass the strap of the child seat behind
the seat backrest, centring it between the
apertures for the head restraint rods,
F secure the upper strap hook to ring B,
F tighten the upper strap.
Front seat
The mountings comprise three rings for each
seat:
5
When fitting an ISOFIX child seat to the
left-hand rear seat of the bench seat,
before fitting the seat, first move the
centre rear seat belt towards the middle
of the vehicle, so as to avoid the seat
interfering with the operation of the seat
belt.
Rear seats
one ring B, located behind the seat and
-
indicated by a marking, referred to as the
TOP TETHER for fixing the upper strap.
This system prevents the child seat from tipping
forward in the event of a front impact.
This ISOFIX mounting system ensures fast,
reliable and safe fitting of the child seat in your
vehicle.
-
two rings A, located between the vehicle
seat backrest and cushion, indicated by
a marking,
111
Safety
An incorrectly installed child seat
"RÖMER Baby-Safe Plus and its ISOFIX
"RÖMER Duo Plus ISOFIX"
(size category: B1)
compromises the child's safety in the
event of an accident.
base"
(size category: E)
Strictly observe the fitting instructions
provided in the user guide supplied with
the child seat.
Group 1: from 9 to 18 kg
Group 0+: from birth to 13 kg
For information about the installation
possibilities for ISOFIX child seats in your
vehicle, refer to the summary table.
Installed only in the "forward facing" position.
Is attached to rings A and ring B, referred to
as TOP TETHER, using an upper strap.
Is only installed on the front passenger seat
or on the outer rear seats. The head restraint
on the outer rear seat must be fully raised.
Three shell angles: sitting, reclining,
lying down.
This child seat can also be used on seats
not equipped with ISOFIX mountings. In this
case, it must be secured to the vehicle seat
using the three-point seat belt. Adjust the
front seat of the vehicle so that the child's feet
do not touch the backrest.
Installed "rearward facing" using an ISOFIX
base which is attached to rings A.
Is only installed on the front passenger seat
or on the outer rear seats.
The base has a support leg, height-
adjustable, which rests on the vehicle's floor.
This child seat can also be secured with
a seat belt. In this case, only the shell is used
and attached to the vehicle seat using the
three-point seat belt.
Recommended ISOFIX
child seats
Also consult the user guide from the child
seat's manufacturer to find out how to
install and remove the seat.
112
Safety
Summary table of locations for ISOFIX child seats
In line with European regulations, this table indicates the options for installing ISOFIX child seats on the vehicle seats fitted with ISOFIX mountings.
In the case of universal and semi-universal ISOFIX child seats, the ISOFIX size category, determined by a letter from A to G, is indicated on the child
seat next to the i-Size logo.
Weight of the child/indicative age
Under 10 kg
Under 10 kg
(group 0)
Under 13 kg
From 9 to 18 kg
(group 1)
From about 1 to 3 years old
(group 0)
Up to about
6 months old
(group 0+)
Up to about 1 year old
Type of ISOFIX child seat
ISOFIX size category
Carrycot
"Rearward facing"
"Rearward facing"
"Forward facing"
5
F
G
C
D
E
C
D
A
B
B1
Front passenger
Seat position
airbag
Deactivated "OFF"
X
X
IL
X
IL
X
IUF/IL
IUF/IL
Passenger
seat (b)
Row 1 (a)
Activated "ON"
Outer rear
seats (c)
X
X
IL
X
IL
IUF/IL
Row 2
Centre rear
seat
Not ISOFIX
113
Safety
IUF Seat suitable for installing an Isofix
Universal seat, "Forward facing", secured
using the upper strap.
Locations for i-Size child seats
i-Size child seats have two latches that engage on the two rings A.
i-Size child seats also have:
IL Seat suitable for installing an Isofix Semi-
Universal seat which is either:
-
-
either an upper strap that is attached to ring B,
or a support leg that rests on the vehicle floor, compatible with the approved i-Size seat position,
-
-
-
"rearward facing" fitted with an upper
strap or a support leg,
"forward facing" fitted with a support
leg,
a carrycot fitted with an upper strap or
a support leg.
the role of which is to prevent the child seat from tipping forward in the event of a collision.
For more information on ISOFIX mountings, refer to the corresponding section.
In accordance with the new European regulations, this table indicates the options for installing
i-Size child seats on seats in the vehicle fitted with ISOFIX mountings approved for i-Size.
For securing the upper strap using the ISOFIX
mountings, refer to the corresponding section.
X
Seat not suitable for installing an ISOFIX
seat or carrycot of the weight group
indicated.
Front passenger
airbag
i-Size restraint
system
Seat position
(a) Refer to the current legislation in your
country before installing a child at this
seat position.
Deactivated "OFF"
Activated "ON"
i-U
Passenger seat
Row 1 (a)
Row 2 (c)
(b)
(b) Tilt the seat backrest to 45°, then install
the child seat.
i-UF
Straighten the backrest until it contacts
the child seat's backrest.
Outer rear seats
Centre rear seat
i-U
(c) To install a child seat on a rear seat,
"rearward facing" or "forward facing",
adjust the rear seat to the fully back
position with the backrest tilted.
Not i-Size
i-U Suitable for i-Size restraint systems in the
"Universal" category, "forward facing" and
"rearward facing".
i-UF Only suitable for i-Size restraint systems
in the "Universal" category which are
"forward facing".
114
