Deutsch
EnglishDriving -> Programmable speed limiter for your Citroen C5 Aircross 2017-2025
Driving
4. Pause/resume speed limiter with the
Switching on/pausing
Programmable speed
limiter
Refer to the General recommendations on
the use of driving and manoeuvring aids.
speed setting previously stored.
F Turn the thumbwheel 1 to the LIMIT position
to select the speed limiter; the function is
paused.
5. Depending on version:
Display of speed thresholds recorded
using Memorising speeds.
or
F If the speed setting is suitable (last speed
setting programmed in the system), press
button 4 to switch the speed limiter on.
Use the speed suggested by the Speed
Limit recognition and recommendation
(MEM display).
This system prevents the vehicle
from exceeding the speed
programmed by the driver (speed
setting).
F Pressing button 4 again temporarily
For more information on Memorising speeds
or on the Speed Limit recognition and
recommendation, refer to the corresponding
sections.
interrupts the function (pause).
The speed limiter is switched on manually.
The minimum speed setting is 19 mph
(30 km/h).
The speed setting remains in the system
memory when the ignition is switched off.
Adjusting the Speed
Limit recognition and
recommendation setting
You do not have to switch the speed limiter on
in order to set the speed.
Displays in the instrument panel
Steering mounted control
To modify the limit speed setting from the
current speed of the vehicle:
F in steps of +/- 1 mph (km/h), make
successive short presses on button 2 or 3,
F continuously, in steps of +/- 5 mph (km/h),
press and hold button 2 or 3.
To modify the limit speed setting using
memorised speeds and from the touch screen:
F press button 5 to display the memorised
speed settings,
F press the button for the desired speed
setting.
6. Indication of speed limiter on (amber
colour)/pause (grey colour).
7.
Indication of speed limiter mode selection.
1. ON (LIMIT position)/OFF (0 position).
2. Reduce the speed setting.
8. Programmed speed value.
9. Speed suggested by the Speed Limit
recognition and recommendation system
(depending on version).
3. Increase the speed setting.
142
Driving
The selection screen closes after a few
moments.
This setting becomes the new limit speed.
When the limit speed is exceeded but this is not
due to action by the driver (in case of a steep
slope, for example), an audible signal triggers
immediately.
On sharp acceleration, as when
descending a steep hill, the speed limiter
will not be able to prevent the vehicle from
exceeding the programmed speed.
The speed limiter is deactivated
temporarily and the displayed
To modify the speed limiter setting using
the speed suggested by the Speed Limit
recognition and recommendation system:
F the speed suggested is displayed in the
instrument panel,
F make a first press on button 5; a message
is displayed to confirm the memorisation
request,
F press button 5 again to save the suggested
speed.
The speed displays immediately in the
instrument panel as the new speed setting.
Once the speed of the vehicle returns to
the programmed setting, the speed limiter
functions again: the display of the programmed
speed setting becomes fixed again.
programmed speed flashes.
An audible signal accompanies the
flashing of the programmed speed when
exceeding the speed is not due to an
action by the driver.
The use of mats not approved by
CITROËN may interfere with the operation
of the speed limiter.
Switching off
F Turn the thumbwheel 1 to the "0" position:
the display of information on the speed
limiter disappears.
To avoid any risk of jamming of the pedals:
-
-
ensure that the mat is positioned
correctly,
never fit one mat on top of another.
Temporarily exceeding the
programmed speed
Malfunction
Flashing of the dashes indicates a fault with the
speed limiter.
Have it checked by a CITROËN dealer or
a qualified workshop.
6
F To temporarily exceed the programmed
speed threshold, fully depress the
accelerator pedal.
The speed limiter is deactivated temporarily
and the displayed programmed speed flashes.
If it is exceeded for a prolonged period of time,
an audible warning is triggered.
Simply release the accelerator pedal to return
to below the programmed speed.
143
