Deutsch
EnglishEase of use and comfort -> Boot fittings for your Citroen C5 Aircross 2017-2025
Ease of use and comfort
Load space cover
12 V accessory socket
Boot fittings
It is in two parts:
-
-
a fixed part with an open storage space,
a movable part which rises when the boot is
opened, with an open storage space.
F To connect a 12 V accessory (max. power:
120 W), remove the cap and connect an
appropriate adapter.
1. Load space cover
2. 12 V accessory socket (120 W)
3. Boot lamp
F Switch on the ignition.
The connection of an electrical device
not approved by CITROËN, such as
a USB charger, may adversely affect the
operation of vehicle electrical systems,
causing faults such as poor radio
reception or interference with displays in
the screens.
4. Movable cross-piece of the rear seats (to
increase the volume of the boot)
5. Stowing rings
6. Adjustable boot floor (2 positions)
To remove the load space cover:
F unhook the two cords 1,
F gently lift the movable part 2, then unclip it
on each side 3,
7.
Storage wells/tool box under the floor
The stowing rings are designed to secure
luggage using different types of retaining
nets.
F unclip the fixed part on each side 4, then
remove the load space cover.
Such nets are available as an option or as
an accessory.
For more information, contact a CITROËN
dealer.
When sharp deceleration occurs, objects
placed on the load space cover can turn
into projectiles.
For the installation of a high load retaining
net, refer to the corresponding section.
76
Ease of use and comfort
F Remove the load space cover.
F Insert the ends of the bar, one after the
other, into the fixing points of the roof.
F Attach the straps of the net to the lower
rings, located on each side trim of the boot.
F Pull on the straps to stretch the net.
Behind the front seats
High load retaining net
3
2-position boot floor
This two-position floor allows the boot volume
to be optimised using the lateral stops located
on the sides:
F Fold down the rear seats.
F Insert the ends of the bar, one after the
other, into the fixing points in the roof.
F Attach the net's straps to the upper
anchoring points, located in the housing of
the Top Tether fixings.
-
High position (100 kg max): to obtain a flat
floor up to the front seats, when the rear
seats are folded down.
This removable net allows the entire loading
volume up to the roof to be used:
-
Low position (150 kg max): maximum boot
volume.
-
behind the front seats (1st row) when the
rear seats are folded down,
F Pull on the straps to stretch the net.
-
behind the rear seats (2nd row) when the
load space cover is removed.
Behind the rear seats
It offers protection to the occupants when
very sharp braking occurs.
77
Ease of use and comfort
To change the height:
Storage well
Boot lighting
F Lift and pull the floor towards you using its
central handle, then use the lateral stops to
move it.
F Push the floor all the way forwards to place
it in the desired position.
Ensure that the boot is empty before
moving the boot floor.
F Raise the boot floor as much as possible to
access the storage well.
This comes on automatically when the boot is
opened and goes off automatically when the
boot is closed.
Depending on version, it includes:
-
a temporary puncture repair kit with the
vehicle tools,
-
a spare wheel with the vehicle tools.
The lighting time varies according to the
circumstances:
-
-
-
when the ignition is off, approximately
ten minutes,
in energy economy mode,
approximately thirty seconds,
with the engine running, unlimited.
To increase the boot volume with the floor in
the low position:
F Pull the cross-piece of the rear seats up
vertically to the level of the markings to
remove it.
F To put it back in place, push it as far as it will
go, until it engages.
78
