Deutsch
EnglishSecurity for your Ford Ecosport 2012-2022
Security
Automatic Disarming
PASSIVE ANTI-THEFT
SYSTEM
Principle of Operation
The system prevents someone from
starting the engine with an incorrectly
coded key.
Note: The system is not compatible with
non-Ford aftermarket remote start systems.
Use of these systems may result in engine
starting problems and a loss of security
protection
When you switch the ignition on, the engine
immobilizer will disarm automatically if a
correctly coded key is used. If you are
unable to start the engine with a correctly
coded key, have your vehicle checked by
an Authorized Dealer.
Replacement Keys
Note: Your vehicle comes equipped with
two remote controls with a folding key blade
or two intelligent access keys.
The remote controls with a folding key
blade functions as a programmed ignition
key that operates all the locks and starts
the vehicle, as well as a remote control.
The intelligent access key functions as a
programmed key that operates the driver
door lock and activates the intelligent
access with push button start system, as
well as a remote control.
If your programmed transmitters or
standard SecuriLock® coded keys are lost
or stolen and you do not have an extra
coded key, you will need to have your
vehicle towed to an authorized dealer. You
need to erase the key codes from your
vehicle and program new coded keys.
Store an extra programmed key away from
the vehicle in a safe place to help prevent
any inconveniences. See your authorized
dealer to purchase additional spare or
replacement keys. Have replacement keys
coded together with recoding your
remaining keys.
Note: Have all of your remaining keys
erased and recoded if you lose a key. Have
replacement keys coded together with
recoding your remaining keys. See an
authorized dealer for further information.
Note: Do not shield your keys with metal
objects. This may prevent the receiver from
recognizing a coded key.
Note: Metallic objects, electronic devices
or a second coded key on the same key
chain may result in vehicle starting
problems, especially if they are too close to
the key when starting your vehicle. Prevent
these objects from touching the coded key
when starting your vehicle. Switch the
ignition off, move all objects on the key
chain away from the coded key and restart
your vehicle if a problem occurs.
Note: Do not leave a duplicate coded key
in your vehicle. Always take your keys and
lock all doors when leaving your vehicle.
SecuriLock®
The system is an engine immobilization
system. It is designed to help prevent the
engine from being started unless a coded
key programmed to your vehicle is used.
Using the wrong key may prevent the
engine from starting. A message may
appear in the information display.
If you are unable to start the engine with a
correctly coded key, a malfunction has
happened and a message may appear in
the information display.
Automatic Arming
When you switch the ignition off the engine
immobilizer will arm automatically after a
short time.
67
EcoSport (CBW) Canada/United States of America, Vehicles Built From: 17-06-2019, LN1J-19A321-ZFA enUSA, Edition date: 201904, First-Printing
Security
Programming a Spare Remote Control
7. After at least 3 seconds but within 10
seconds of switching the ignition off
and removing the previously
With a Folding Key Blade
You can program your own integrated
keyhead transmitter or standard
SecuriLock coded keys to your vehicle.
This procedure will program both the
vehicle immobilizer keycode and the
remote entry portion of the remote control
to your vehicle.
programmed coded key, insert the new
unprogrammed key into the ignition.
8. Switch the ignition from off to on. Keep
the ignition on for at least six seconds.
9. Remove the newly programmed coded
key from the ignition.
You must have two previously
If you have successfully programmed the
coded key, it will start your vehicle and
operate the remote entry system.
programmed coded keys and the new
unprogrammed key readily accessible.
Contact an authorized dealer to have the
spare key programmed if two previously
programmed keys are not available.
Make sure that the ignition is switched off
before beginning this procedure. Carry out
all steps within 30 seconds of starting the
sequence. Stop and wait for at least one
minute before starting again if you carry
out any steps out of sequence.
If programming was unsuccessful, wait 10
seconds and repeat Steps 1 through 8.
If programming remains unsuccessful,
have your vehicle checked by an authorized
dealer.
Wait 20 seconds and repeat Steps 1
through 9 to program an additional key.
Programming a Spare Intelligent
Access Key
Note: You can program a maximum of six
coded keys to your vehicle.
Note: You can program a maximum of four
Read and understand the entire procedure
keys to your vehicle.
before you begin.
You must have two previously
1. Insert the first previously programmed
coded key into the ignition.
2. Switch the ignition from off to on. Keep
the ignition on for at least 3 seconds,
but no more than 10 seconds.
programmed intelligent access keys inside
your vehicle and the new unprogrammed
intelligent access key readily accessible.
You can purchase replacement keys or
remote controls from an authorized dealer.
Make sure that the ignition is switched off
before beginning this procedure. Make sure
that you close all the doors before
3. Switch the ignition off and remove the
first coded key from the ignition.
4. After at least 3 seconds but within 10
seconds of switching the ignition off,
insert the second previously coded key
into the ignition.
5. Switch the ignition from off to on. Keep
the ignition on for at least 3 seconds,
but no more than 10 seconds.
6. Switch the ignition off and remove the
second previously programmed coded
key from the ignition.
beginning and that they remain closed
throughout the procedure. Carry out all
steps within 30 seconds of starting the
sequence. Stop and wait for at least one
minute before starting again if you carry
out any steps out of sequence.
Read and understand the entire procedure
before you begin.
Remove the key blade from the
transmitter.
68
EcoSport (CBW) Canada/United States of America, Vehicles Built From: 17-06-2019, LN1J-19A321-ZFA enUSA, Edition date: 201904, First-Printing
Security
5. Wait five seconds and then press the
push button ignition switch again.
6. Remove the intelligent access key.
7. Within 10 seconds, place a second
programmed intelligent access key in
the backup slot and press the push
button ignition switch.
8. Wait five seconds and then press the
push button ignition switch again.
9. Remove the intelligent access key.
10. Wait five seconds, then place the
unprogrammed intelligent access key
in the backup slot and press the push
button ignition switch.
Programming is now complete. Check that
the remote control functions operate and
your vehicle starts with the new intelligent
access key.
If programming was unsuccessful, wait 10
seconds and repeat steps 1 through 6. If it
still does not work, take your vehicle to an
authorized dealer.
1. Open the floor console storage
compartment lid.
2. Remove the tray.
ANTI-THEFT ALARM
Alarm System(If Equipped)
Perimeter Alarm (if equipped)
The perimeter alarm is a deterrent against
unauthorized access to your vehicle
through the doors and the hood.
Triggering the Alarm
Once armed, the alarm is triggered in any
of the following ways:
•
•
If someone opens a door, the tailgate
or the hood without a valid key or
remote control.
If someone switches your vehicle on
3. Place the key into the backup slot.
4. Press the push button ignition switch.
without a correctly coded key.
69
EcoSport (CBW) Canada/United States of America, Vehicles Built From: 17-06-2019, LN1J-19A321-ZFA enUSA, Edition date: 201904, First-Printing
Security
If the alarm is triggered, the alarm horn will
sound for 30 seconds and the hazard
warning flasher will flash for five minutes.
Any further attempts to perform one of the
above will trigger the alarm again.
Arming the Alarm
With ignition OFF and doors closed, lock
the vehicle via Remote Control or exterior
door handle. Alarm will be armed after 20
seconds.
Arming the alarm can also be achieved by
locking the vehicle using the trim switches
while a side door is open and closing all
doors, or using the driver's door cylinder.
In these two last cases, alarm will be
armed after 20 seconds.
Note: Alarm will arm due to an auto-relock.
See Doors and Locks (page 60).
Disarming the Alarm
Vehicles Without Intelligent Access
System
Disarm and silence the alarm by unlocking
the doors with the key and switching your
vehicle on with a correctly coded key or
unlocking the doors with the remote
control.
Vehicles with Intelligent Access
System
Note: A valid intelligent access key must
be located within the detection range of
that door for entry.
Disarm the alarm by performing a
intelligent access entry, or switching your
vehicle on, or unlocking the vehicle with
the remote control.
Disarm the alarm by performing a keyless
entry, or switching your vehicle on, or
unlocking the vehicle with the remote
control.
70
EcoSport (CBW) Canada/United States of America, Vehicles Built From: 17-06-2019, LN1J-19A321-ZFA enUSA, Edition date: 201904, First-Printing
