Deutsch
EnglishKeyless Entry for your Ford Focus 2018-2025
Keyless Entry
4. Switch KeyFree on and off.
KEYLESSENTRYLIMITATIONS
Switching Keyless Entry On and
Off - Vehicles With: 12.3 Inch
Instrument Cluster Display Screen
1. Press the menu button on the steering
wheel to enter the information display
main menu.
2. Select Settings.
3. Select Vehicle.
4. Select Locks.
5. Select KeyFree.
6. Press and hold the OK button until a
confirmation message appears in the
information display.
E78276
A valid passive key must be within one of
the three external detection ranges. These
are approximately 1.5 m (5 ft) from the
front door handles and the liftgate.
Reprogramming the Unlocking
Function - Vehicles With: 4.2 Inch
Instrument Cluster Display Screen
You can program the unlocking function
so that only the driver door unlocks when
you touch the unlock sensor on the exterior
door handle.
If you program the unlocking function so
that only the driver door unlocks, the
following occurs:
The system could not function if:
•
The passive key remains stationary for
about a minute.
•
•
•
The vehicle battery has no charge.
The passive key battery has no charge.
The passive key frequencies are
jammed.
•
If you open the driver door first, all
other doors remain locked. You can
unlock all of the other doors from inside
your vehicle using the power door lock
control on the driver door. You can
unlock individual doors by pulling the
interior door handles on those doors.
•
The passive key is too close to metal
objects or electronic devices, for
example keys or a cell phone.
KEYLESS ENTRY SETTINGS
•
If you open any other door first, all
Switching Keyless Entry On and
Off - Vehicles With: 4.2 Inch
other doors and the liftgate unlock.
Instrument Cluster Display Screen
You can change between the unlocking
modes in the information display.
1. Using the information display controls
1. Using the information display controls
on the steering wheel, select Settings.
on the steering wheel, select Settings.
2. Select Vehicle settings.
3. Select Locks.
2. Select Vehicle settings.
3. Select Locks.
83
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing
Keyless Entry
4. Select Unlocking.
5. Select All doors or Driver's door.
Reprogramming the Unlocking
Function - Vehicles With: 12.3 Inch
Instrument Cluster Display Screen
You can program the unlocking function
so that only the driver door unlocks when
you touch the unlock sensor on the exterior
door handle.
If you program the unlocking function so
that only the driver door unlocks, the
following occurs:
E248553
Touch the unlock sensor to unlock your
vehicle and disarm the alarm. The
direction indicators flash. Do not touch the
lock sensor on the top of the door handle.
Keep the door handle clean to make sure
the system correctly operates.
After unlocking the doors with the unlock
sensor, there is a brief delay before you can
lock your vehicle. When the delay period
is over, you can lock the doors again,
provided the passive key is within the
respective detection range.
•
If you open the driver door first, all
other doors remain locked. You can
unlock all of the other doors from inside
your vehicle using the power door lock
control on the driver door. You can
unlock individual doors by pulling the
interior door handles on those doors.
Locking the Doors
Lock sensors are on the top of the exterior
front door handles.
•
If you open any other door first, all
other doors and the liftgate unlock.
You can change between the unlocking
modes in the information display.
1. Press the menu button on the steering
wheel to enter the information display
main menu.
E248554
2. Select Settings.
Touch a lock sensor once to lock your
vehicle and arm the alarm. The direction
indicators flash.
3. Select Vehicle.
4. Select Locks.
5. Select Unlocking.
6. Select All doors or Driver's door.
Keep the door handle clean to make sure
the system correctly operates.
Note: Your vehicle does not automatically
lock. If you do not touch a lock sensor your
vehicle remains unlocked.
LOCKING AND UNLOCKING
THE DOORS USING KEYLESS
ENTRY
Unlocking the Doors
Unlock sensors are on the back of the
exterior front door handles.
84
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing
Keyless Entry
After locking the doors with the lock
KEYLESS ENTRY –
sensor, there is a brief delay before you can
unlock your vehicle. This delay lets you
pull the handle to make sure your vehicle
is locked. When the delay period is over,
you can unlock the doors again, provided
the passive key is within the respective
detection range.
TROUBLESHOOTING
Keyless Entry – Frequently Asked
Questions
Why does the keyless entry system not
function?
Double Locking the Doors
If the system does not function it may
be limited. See Keyless Entry
Limitations (page 83). If the system
Touch a lock sensor twice within three
seconds to double lock your vehicle and
arm the alarm. The direction indicators
flash. Do not touch the unlock sensor on
the back of the door handle.
Why can I not lock my vehicle?
If you electronically lock your vehicle
with a rear door or the liftgate open,
the system searches for a passive key
inside your vehicle after you close the
last door. If the system detects a key,
all doors unlock indicating that a key
is inside. Your vehicle locks if another
passive key is within the detection
range after you close the last door.
LOCKING AND UNLOCKING
THE LIFTGATE USING
KEYLESS ENTRY
Unlocking the Liftgate
Why does the passive key not work?
The system deactivates passive keys
left inside your vehicle when you lock
it. You cannot switch the ignition on
using a deactivated passive key. Press
the unlock button on the remote
control to reactivate a passive key.
E190028
Press the exterior release button hidden
above the license plate.
Note: A valid passive key must be within
the detection range.
Locking the Liftgate
The liftgate locks after you fully close it.
85
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing
