Deutsch
EnglishMaintenance -> Removing a Rear Lamp-4-Door for your Ford Focus 2018-2025
Maintenance
6. To install, reverse the removal
REMOVING A REAR LAMP - 4-
DOOR
procedure.
Reversing Lamp and Rear Lamp
1. Open the liftgate.
WARNING: Lamps and associated
components become hot when in use.
Let them cool down before you remove
them.
Brake Lamp, Rear Lamp and
Direction Indicator
1
2
E340801
2. Firmly pull the soft trim panel at the
ten fixing points to unclip the soft trim
panel.
Note: Use a screwdriver to gently lift the
panel.
E
1. Press the panel as indicated.
2. Carefully remove the panel.
4
3
E
3. Turn the wing nut counterclockwise
and remove it.
3. Remove the bolt that secures the lamp
assembly.
4. Gently pull the lamp assembly away
from the vehicle.
5. Disconnect the electrical connector.
433
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing
Maintenance
Headlamp
You may have to remove the headlamp
assembly prior to replacing a bulb. See
Removing a Headlamp (page 431).
Halogen Headlamp
4. Disconnect the electrical connector.
A
A
Daytime running lamps.
B
A
C
5. Remove the lamp.
6. To install, reverse the removal
procedure.
CHANGING A BULB
E264499
A
B
C
Headlamp low beam.
Headlamp high beam.
Front direction indicator.
WARNING: Switch the lamps and
the ignition off. Failure to do so could
result in serious personal injury.
WARNING: Lamps and associated
components become hot when in use.
Let them cool down before you remove
them.
Headlamp Low Beam
1. Turn the cover counterclockwise and
remove it.
Use the correct specification bulb. See
Bulb Specification Chart (page 489).
434
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing
