Deutsch
EnglishVehicle Care -> Cleaning the Exterior for your Ford Focus 2018-2025
Vehicle Care
Cleaning Chrome, Aluminium or
CLEANING THE EXTERIOR
Stainless Steel
Cleaning the Exterior Precautions
We recommend that you only use a car
shampoo, a soft cloth and water on
bumpers and other chrome, aluminium or
stainless steel parts.
Note: For additional information and
assistance, we recommend that you contact
an authorized dealer.
Immediately remove fuel spillages, AdBlue
residuals, bird droppings, insect deposits
and road tar. These may cause damage to
your vehicle’s paintwork or trim over time.
Remove any exterior accessories, for
example antennas, before entering a car
wash.
Note: Rinse the area well after cleaning.
Note: Do not use abrasive materials, for
example steel wool or plastic pads, as they
can scratch these surfaces.
Cleaning Headlamps and Rear
Lamps
We recommend that you only use cold or
lukewarm water containing car shampoo
to clean the headlamps and the rear
lamps.
Note: Do not use chrome cleaner, metal
cleaner or polish on wheels or wheel covers.
Cleaning Wheels
Do not scrape the lamps.
Do not wipe lamps when they are dry.
Only use a recommended wheel and tire
cleaner to clean the wheels weekly. For
additional information and assistance, we
recommend that you contact an
authorized dealer.
Cleaning Windows and Wiper
Blades
To clean the windshield and wiper blades:
1. Use a sponge to remove heavy
deposits of dirt and brake dust.
2. Rinse well after cleaning.
•
Clean the windshield with a
non-abrasive glass cleaner.
Note: Do not apply a cleaning chemical to
warm or hot wheel rims and covers.
Note: When cleaning the interior of the
windshield, avoid getting any glass cleaner
on the instrument panel or door panels.
Wipe any glass cleaner off these surfaces
immediately.
If you intend on parking your vehicle for an
extended period after cleaning the wheels
with a wheel cleaner, drive your vehicle for
a few minutes before parking your vehicle.
This reduces the risk of corrosion of the
brake discs, brake pads and linings.
•
Clean the wiper blades with washer
fluid or water applied with a soft
sponge or cloth.
Do not clean the wheels when they are hot.
Note: Do not use razor blades or other
sharp objects to clean or remove decals
from the inside of the heated rear window.
This can cause damage not covered by the
vehicle Warranty.
Note: Some car washes could damage
wheel rims and covers.
Note: Using non-recommended cleaners,
harsh cleaning products, chrome wheel
cleaners or abrasive materials could
damage wheel rims and covers.
440
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing
Vehicle Care
CleaningtheEngineCompartment
Cleaning Camera Lenses and
Sensors
Use a vacuum cleaner to remove debris
from the screen area below windshield.
We recommend that you only use
lukewarm or cold water and a soft cloth
to clean the camera lens and sensors.
Note: If you are not familiar with the parts
around the engine do not wash the engine
compartment. Avoid frequent engine
washes.
Note: Do not pressure wash camera lens
and sensors.
When washing the engine compartment:
Cleaning the Underbody
Flush the complete underside of your
vehicle frequently. Keep body and door
drain holes free from packed dirt.
Rear suspension components may require
regular cleaning with a power washer or a
thorough rinse with a strong stream of
water if the vehicle is operated in dusty or
muddy environments. Rear leaf springs or
other suspension components may emit
squeaking or popping noises while
operating the vehicle if particles, such as
dirt, rocks, or other debris, are present in
the components.
•
•
•
Never wash or rinse the engine while it
is hot or running.
Never wash or rinse any ignition coil,
spark plug wire or spark plug well.
Cover the battery, power distribution
box, and air filter assembly to prevent
water damage.
Note: If your vehicle has an engine cover
remove the cover before application of
shampoo and degreaser.
•
Spray an approved engine shampoo
and degreaser on all parts that require
cleaning and rinse with water.
Cleaning Stripes or Graphics
It is recommended to wash your vehicle by
hand however, pressure washing may be
used under the following conditions:
CLEANING THE INTERIOR
Cleaning the Instrument Panel
•
Use a spray with a 40° wide spray
angle pattern.
WARNING: Do not use chemical
solvents or strong detergents when
cleaning the steering wheel or
instrument panel to avoid contamination
of the airbag system.
•
Keep the nozzle at a 305 mm (12 in)
distance and 90° angle to your
vehicle's surface.
•
•
Do not use water pressure higher than
14,000 kPa (2,000 psi).
We recommend that you only clean the
instrument panel and cluster lens with a
damp soft cloth. Dry the area with a clean,
soft cloth.
For additional information and assistance,
we recommend that you contact an
authorized dealer.
Do not use water hotter than 82°C
(179°F).
Note: Holding the pressure washer nozzle
at an angle to the vehicle's surface may
damage graphics and cause the edges to
peel away from the vehicle's surface.
441
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing
