Deutsch
EnglishWindows for your Ford Focus 2018-2025
Windows
2. Press and hold the window control
OPENING AND CLOSING THE
WINDOWS
switch until the window is fully open.
Keep the window control switch
pressed for a few seconds.
3. Lift and hold the window control switch
until the window is fully closed. Keep
the window control switch held for a
few seconds.
4. Press and hold the window control
switch until the window is fully open.
Keep the window control switch
pressed for a few seconds.
5. Lift and hold the window control switch
until the window is fully closed. Keep
the window control switch held for a
few seconds.
WARNING: Do not leave children
unattended in your vehicle and do not
let them play with the power windows.
Failure to follow this instruction could
result in personal injury.
WARNING: When closing the
power windows, verify they are free of
obstruction and make sure that children
and pets are not in the proximity of the
window openings.
Press the window control switch
to open the window. Lift the
window control switch to close
the window.
Note: The power windows operate with the
ignition on, and for several minutes after you
switch the ignition off or until you open a
front door.
Note: Repeat the procedure if the window
does not close when you use one-touch.
GLOBAL OPENING AND
CLOSING
What Is Global Opening and
Closing
To reduce wind noise or pulsing noise when
one window is open, slightly open the
opposite window.
You can use the remote control to operate
the windows with the ignition off.
One-Touch Open
Fully press the window control switch and
release it. Press again or lift it to stop the
window.
Using Global Opening
1. Press and release the unlock button on
the remote control.
One-Touch Close
Fully lift the window control switch and
release it. Press again or lift it to stop the
window.
2. Press and hold the unlock button on
the remote control.
3. Release the button when the windows
and moonroof start to open.
Note: The moonroof stops in the vent
Resetting One-Touch Close
position.
Carry out all steps within 30 seconds of
Press the lock or the unlock button on the
starting the sequence.
remote control to stop global opening.
1. Close the window.
Note: You can use global opening for a
short period of time when you unlock your
vehicle using the remote control.
125
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing
Windows
Switching Global Opening On and
Switching Global Closing On and
Off - Vehicles With: 4.2 Inch
Off - Vehicles With: 4.2 Inch
Instrument Cluster Display Screen
Instrument Cluster Display Screen
1. Using the information display controls
1. Using the information display controls
on the steering wheel, select Settings.
on the steering wheel, select Settings.
2. Select Vehicle settings.
3. Select Windows.
4. Switch Global open on or off.
2. Select Vehicle settings.
3. Select Windows.
4. Switch Global close on or off.
Switching Global Opening On and
Off - Vehicles With: 12.3 Inch
Switching Global Closing On and
Off - Vehicles With: 12.3 Inch
Instrument Cluster Display Screen
Instrument Cluster Display Screen
1. Press the menu button on the steering
wheel to enter the information display
main menu.
1. Press the menu button on the steering
wheel to enter the information display
main menu.
2. Select Settings.
2. Select Settings.
3. Select Vehicle.
3. Select Vehicle.
4. Select Windows.
5. Switch Global open on or off.
4. Select Windows.
5. Switch Global close on or off.
Using Global Closing
WINDOW BOUNCE-BACK
What Is Window Bounce-Back
WARNING: When closing the
power windows, verify they are free of
obstruction and make sure that children
and pets are not in the proximity of the
window openings.
The window stops and reverses if it detects
an obstruction when closing.
Overriding Window Bounce-Back
1. Press and hold the lock button on the
remote control.
WARNING: If you override
bounce-back, the window does not
reverse if it detects an obstacle. Take
care when closing the windows to avoid
personal injury or damage to your
vehicle.
2. Release the button when the windows
and moonroof start to close.
Press the lock or the unlock button on the
remote control to stop global closing.
Note: Bounce-back is on during global
closing. See What Is Window
Bounce-Back (page 126).
1. Close the window until it reaches the
point of resistance and let it reverse.
126
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing
Windows
2. Lift the control within five seconds to
LOCKING THE REAR WINDOW
CONTROLS
Press the window control switch
to lock or unlock the rear window
controls. It illuminates when you
lock the rear window controls.
override bounce-back and close the
window. Bounce-back is now disabled
and you can close the window
manually.
Note: The window goes past the point of
resistance and you can fully close it.
Note: If the window does not close, have
your vehicle checked as soon as possible.
Resetting Window Bounce-Back
WARNING:Bounce-back is off until
you reset the memory. Take care when
closing the windows to avoid personal
injury or damage to your vehicle.
If you have disconnected the battery, you
must reset the bounce-back memory
separately for each window.
Carry out all steps within 30 seconds of
starting the sequence.
1. Close the window.
2. Press and hold the switch until the
window is fully open. Keep the switch
pressed for a few seconds.
3. Lift and hold the switch until the
window is fully closed. Keep the switch
held for a few seconds.
4. Press and hold the switch until the
window is fully open. Keep the switch
pressed for a few seconds.
5. Lift and hold the switch until the
window is fully closed. Keep the switch
held for a few seconds.
Note: Repeat the procedure if the window
does not close when you use one-touch.
127
Focus (CGE) Vehicles Built From: 15-03-2021, CG3784en enGBR, Edition date: 202012, First-Printing
