Deutsch
EnglishAdaptive Cruise Control -> Setting the Adaptive Cruise Control Gap for your Ford Kuga 2019-2025
Adaptive Cruise Control(If Equipped)
SETTING THE ADAPTIVE
CRUISE CONTROL SPEED -
VEHICLES WITH: ADAPTIVE
CRUISE CONTROL WITH STOP
AND GO
Drive to the speed you prefer.
E255686
Press the toggle button upward
or downward to set the current
speed.
A vehicle image illuminates if there is a
vehicle detected in front of you.
Note: When adaptive cruise control is
active, the speedometer may vary slightly
from the set speed displayed in the
information display.
Take your foot off the accelerator pedal.
The indicator, current gap setting and set
Manually Changing the Set Speed
speed appear in the information display.
Press and release the toggle
button upward to increase the
set speed in small increments.
Press and hold the toggle button upward
to increase the set speed in large
increments. Release the button when you
reach the speed you prefer.
Press and release the toggle
button downward to decrease
the set speed in small
E255686
A vehicle image illuminates if there is a
vehicle detected in front of you.
increments.
Note: When adaptive cruise control is
active, the speedometer may vary slightly
from the set speed displayed in the
information display.
Press and hold the toggle button
downward to decrease the set speed in
large increments. Release the button when
you reach the speed you prefer.
Press the accelerator or brake pedal until
you reach the speed you prefer. Press the
toggle button upward or downward to
select the current speed as the set speed.
The system may apply the brakes to slow
the vehicle to the new set speed. The set
speed displays continuously in the
information display when the system is
active.
Setting the Adaptive Cruise Speed
from a Complete Stop
Press the toggle button upward
or downward while keeping the
brake pedal fully pressed.
The set speed adjusts to 30 km/h
(20 mph).
276
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing
Adaptive Cruise Control(If Equipped)
The indicator, current gap setting and set
speed appear in the information display.
Manually Changing the Set Speed
Press and release the toggle
button upward to increase the
set speed in small increments.
E255686
Press and hold the toggle button upward
to increase the set speed in large
increments. Release the button when you
reach the speed you prefer.
The selected gap appears in the
instrument cluster display as shown by the
bars in the image.
Note: The gap setting is time dependent
and therefore, the distance adjusts with your
vehicle speed.
Press and release the toggle
button downward to decrease
the set speed in small
increments.
Note: It is your responsibility to select a gap
appropriate to the driving conditions.
Press and hold the toggle button
downward to decrease the set speed in
large increments. Release the button when
you reach the speed you prefer.
Adaptive Cruise Control Gap Settings
Graphic
Display,
BarsIndic-
ated
Gap Distance
Dynamic
You can also press the accelerator or brake
pedal until you reach the speed you prefer.
Press the toggle button upward or
downward to select the current speed as
the set speed.
Behavior
Between
Vehicles
The system may apply the brakes to slow
the vehicle to the new set speed. The set
speed continuously displays in the
information display when the system is
active.
1
Closest.
Close.
Medium.
Far.
Sport.
Normal.
Normal.
Comfort.
2
3
4
SETTING THE ADAPTIVE
CRUISE CONTROL GAP
Each time you switch the system on, it
selects the last chosen gap setting.
Press the button to cycle
Following a Vehicle
through the four gap settings.
When a vehicle ahead of you enters the
same lane or a slower vehicle is ahead in
the same lane, the vehicle speed adjusts
to maintain the gap setting.
277
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing
