Deutsch
EnglishMaintenance -> Changing a Bulb for your Ford Kuga 2019-2025
Maintenance
Note: Handle a halogen headlamp bulb
Rear Window Wiper Blade
carefully and keep out of children’s reach.
Grasp the bulb by only its plastic base and
do not touch the glass. The oil from your
hand could cause the bulb to break the next
time you operate the headlamps.
Note: If you accidentally touch the bulb,
clean it with rubbing alcohol before using it.
Headlamp
E271380
1. Lift the wiper arm.
E307881
Note: Do not hold the wiper blade when
lifting the wiper arm.
A
B
C
Park/Turn lamp
High beam headlamp
Low beam headlamp
Note: Make sure that the wiper arm does
not spring back against the glass when the
wiper blade is not attached.
2. Remove the wiper blade.
High beam headlamp
Note: Make sure that the wiper blade locks
into place.
CHANGING A BULB
Replacing Headlamp Bulbs
WARNING: Make sure the bulbs
have cooled down before removing
them. Failure to follow this warning could
result in serious personal injury.
E307882
1. Remove service cap.
381
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing
Maintenance
2. Remove the bulb from the headlamp
1. Remove service cap, if applicable.
assembly by turning it
counterclockwise, then pull it straight
out.
2. Remove bulb from the headlamp
assembly by turning it
counterclockwise, then pull it straight
out.
3. Disconnect the electrical connector.
4. To install, reverse the removal
3. Disconnect the electrical connector.
procedure.
4. To install, reverse the removal
procedure.
Low beam headlamp
LED Bulbs (If Equipped)
LED lamps are not serviceable items. See
an authorized dealer if they fail.
Replacing Fog Lamp Bulbs
1. If you are replacing the driver side bulb,
turn the steering wheel all the way to
the right. If you are replacing the
passenger side bulb, turn the steering
wheel all the way to the left.
E307883
1. Remove service cap.
2. Disconnect the electrical connector.
3. Remove the bulb from the headlamp
assembly by turning it
counterclockwise, then pull it straight
out.
4. To install, reverse the removal
procedure.
Park/Turn lamp
E311716
2. Remove the six lower splash shield
push pins and pull the splash shield
back.
E307884
382
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing
Maintenance
E311715
E307886
3. Disconnect the bulb electrical
connector.
1. Make sure the headlamp control is in
the off position and open the liftgate.
4. To remove the bulb from the headlamp
assembly, turn it counterclockwise,
then pull it straight out.
2. Remove the bolt cover using a
standard flat tip screwdriver.
3. Remove the bolt from the lamp
assembly.
4. Gently pull the lamp assembly away
from the vehicle in an outboard
direction.
5. To install, perform these steps in
reverse order.
Replacing Direction Indicator
Bulbs
5. Disconnect the electrical connector.
6. Remove the direction indicator bulb by
turning the lower bulb socket
counterclockwise. Gently pull the bulb
straight out of the socket.
7. To install, reverse the removal
procedure.
E307885
A
B
Direction Indicator
Side marker
383
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing
Maintenance
ReplacingReverseLampAssembly
Bulbs
E307887
1. Remove the screws with a flathead
screwdriver and pull the lamp
assembly away from the vehicle.
2. Remove the bulb by turning the lower
bulb socket counterclockwise. Gently
pull the bulb straight out of the socket.
3. To install, reverse the removal
procedure.
Replacing License Plate Lamp
Bulbs
License plate lamps are LED and are not
serviceable. See an authorized dealer if
they fail.
ReplacingHigh-MountBrakeLamp
Bulbs
High-mount stop lamps are LED and are
not serviceable. See an authorized dealer
if they fail.
384
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing
