Seats -> Head Restraints for your Ford Kuga 2019-2025
Seats
We recommend that you follow these
guidelines:
SITTING IN THE CORRECT
POSITION
•
Sit in an upright position with the base
of your spine as far back as possible.
•
Do not recline the seat backrest so that
your torso is more than 30 degree from
the upright position.
WARNING: Do not recline the seat
backrest too far as this can cause the
occupant to slide under the seatbelt,
resulting in personal injury in the event
of a crash.
•
•
Adjust the head restraint so that the
top of it is level with the top of your
head and as far forward as possible.
Make sure that you remain
WARNING: Always sit upright
against your seatback with your feet on
the floor.
comfortable.
Keep sufficient distance between
yourself and the steering wheel. We
recommend a minimum of 25 cm
(10 in) between your breastbone and
the airbag cover.
WARNING: Do not place objects
higher than the top of the seat backrest.
Failure to follow this instruction could
result in personal injury or death in the
event of a sudden stop or crash.
•
•
•
Hold the steering wheel with your arms
slightly bent.
Bend your legs slightly so that you can
press the pedals fully.
Position the shoulder strap of the
seatbelt over the center of your
shoulder and position the lap strap
tightly across your hips.
Make sure that your driving position is
comfortable and that you can maintain full
control of your vehicle.
HEAD RESTRAINTS
E68595
WARNING: Fully adjust the head
restraint before you sit in or operate your
vehicle. This will help minimize the risk
of neck injury in the event of a crash. Do
not adjust the head restraint when your
vehicle is moving.
When you use them properly, the seat,
head restraint, seatbelt and airbags will
provide optimum protection in the event
of a crash.
155
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing
Seats
The front seat head restraints consists of:
WARNING: The head restraint is a
A
An energy absorbing head
restraint.
Two steel stems.
safety device. Whenever possible it
should be installed and properly
adjusted when the seat is occupied.
Failure to adjust the head restraint
properly could reduce its effectiveness
during certain impacts.
B
C
Guide sleeve adjust and unlock
button.
Rear Seat Center Head Restraint
WARNING: Adjust the head
restraints for all passengers before you
drive your vehicle. This will help minimize
the risk of neck injury in the event of a
crash. Do not adjust the head restraints
when your vehicle is moving.
Note: Adjust the seat backrest to an upright
driving position before adjusting the head
restraint. Adjust the head restraint so that
the top of it is level with the top of your head
and as far forward as possible. Make sure
that you remain comfortable. If you are
extremely tall, adjust the head restraint to
its highest position.
E187325
The rear seat center head restraint consists
of:
Front Seat Head Restraints
A
An energy absorbing head
restraint.
B
C
Two steel stems.
Guide sleeve adjust and unlock
button.
Raising the Head Restraint
Pull the head restraint up.
Lowering the Head Restraint
1. Press and hold button C.
E291139
2. Push the head restraint down.
Removing the Head Restraints
1. Pull the head restraint up until it
reaches its highest position.
2. Press and hold the C buttons.
3. Pull the head restraint up.
156
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing
Seats
Installing the Head Restraint
Align the steel stems into the guide sleeves
and push the head restraint down until it
locks.
MANUAL SEATS
WARNING: Do not adjust the driver
seat or seat backrest when your vehicle
is moving. This may result in sudden seat
movement, causing the loss of control
of your vehicle.
Rear Seat Outermost Head
Restraint
Moving the Seat Backward and
Forward
WARNING: Make sure the seat fully
locks into place by rocking it backward
and forward.
E305616
The rear seat outermost head restraint
consists of:
A
An energy absorbing head
restraint.
B
C
Two steel stems.
Guide sleeve adjust and unlock
button.
Removing the Head Restraint
1. Pull the head restraint up until it
reaches its highest position.
2. Press and hold both C buttons.
3. Pull the head restraint up.
E163870
Installing the Head Restraint
Align the steel stems into the guide sleeves
and push the head restraint down until it
locks.
157
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing





