Deutsch
EnglishDriving -> Cruise control for your Peugeot 3008 2016-2023
Driving
To return to the speed setting, release the
accelerator pedal (when the set speed is
reached again, the displayed speed stops
flashing).
This system automatically maintains the
vehicle’s speed at the value programmed
by the driver (speed setting), without the use of
the accelerator pedal.
2. Activate cruise control at the current speed/
decrease speed setting
3. Activate cruise control at the current speed/
increase speed setting
Cruise control is switched on manually.
It requires a minimum vehicle speed of 25 mph
(40 km/h).
With a manual gearbox, third gear or higher must
be engaged.
4. Pause/resume cruise control with the speed
setting previously saved
5. Depending on version:
Operating limits
Never use the system in the following
situations:
Display the speed thresholds saved using the
Memorising speeds function
or
Use the speed suggested by the Speed Limit
Recognition and Recommendation (MEM
display)
– In an urban area with the risk of
pedestrians crossing the road.
– In heavy traffic (except versions with the
Stop & Go function).
– On winding or steep roads.
– On slippery or flooded roads.
– In poor weather conditions.
– In the event of restricted visibility for the
driver.
– Driving on a speed circuit.
– Driving on a rolling road.
– When using a ‘space-saver’ type spare
wheel.
– When using snow chains, non-slip covers
or studded tyres.
With an automatic gearbox, mode D or second
gear or higher in mode M must be engaged.
Cruise control remains active after
changing gear on engines fitted with a
manual gearbox and Stop & Start.
For more information on Memorising speeds
or the Speed Limit Recognition and
Recommendation, refer to the corresponding
sections.
Switching off the ignition cancels any
speed setting.
Information displayed on
the instrument panel
Steering-mounted control
Cruise control
For more information, refer to the
General recommendations on the use
of driving and manoeuvring aids and the
Cruise control - particular
6. Cruise control pause/resume
7. Cruise control mode selection
8. Speed setting value
1. ON (CRUISE position)/OFF
recommendations.
134
Driving
Cruise control can also be paused
temporarily:
– by pressing the brake pedal.
– automatically, if the electronic stability
control (ESC) system is triggered.
The selection screen closes after a few
moments.
9. Speed suggested by the Speed Limit
recognition and recommendation system
(depending on version)
6
This setting becomes the new cruise speed.
To modify the cruise speed setting using the
speed suggested by the Speed Limit Recognition
and Recommendation shown on the instrument
panel:
► Press button 5 once; a message is displayed
to confirm the memorisation request.
► Press button 5 again to save the suggested
speed.
Switching on/pausing
Modifying the cruise speed
setting
Cruise control must be active.
To modify the cruise speed setting, based on the
current speed of the vehicle:
► Briefly press button 2 or 3 to change the
value in steps of + or - 1 mph (km/h).
► Press and hold button 2 or 3 to change the
value in steps of + or - 5 mph (km/h).
► Turn thumbwheel 1 to the "CRUISE" position
to select cruise control mode; the function is
paused.
The speed is immediately shown on the
instrument panel as the new speed setting.
Switching off
► Turn the thumbwheel 1 to the "OFF" position:
the cruise control information disappears from
the screen.
Pressing and holding button 2 or
3 results in a rapid change in the speed
of the vehicle.
► Press button 2 or 3 to activate cruise control
and save a speed setting when the vehicle has
reached the desired speed; the vehicle’s current
speed is saved as the speed setting.
Malfunction
As a precaution, we recommend setting
a cruise speed fairly close to the current
speed of your vehicle, to avoid any sudden
acceleration or deceleration of the vehicle.
► Release the accelerator pedal.
Dashes are displayed (flashing, initially, then
fixed) in the event of a cruise control system
malfunction.
To change the cruise speed setting using
memorised speed settings and from the touch
screen:
► Press button 5 to display the memorised
speed settings.
Have the system checked by a PEUGEOT
dealer or a qualified workshop.
► Pressing button 4 temporarily pauses the
function.
► Pressing button 4 again restores operation of
the cruise control (ON).
Drive Assist Plus
Only available on versions with EAT8 automatic
gearbox.
► Press the touch screen button for the desired
speed setting.
135
