Deutsch
EnglishEase of use and comfort -> Mirrors for your Peugeot 3008 2016-2023
Ease of use and comfort
To modify the settings:
► Adjust the height and reach to suit your
driving position.
► Push the control to lock the steering wheel.
Adjustment
3
► Begin with the driver’s seat.
► Select a massage intensity from the three
levels offered: "1" (Low), "2" (Normal) or "3"
(High).
► Select another type of massage from those
offered.
For safety reasons, these adjustments
must only be carried out with the vehicle
stationary.
► Wait for the driver's seat settings page to
disappear.
► Next, proceed with the passenger's seat in
the same way.
Mirrors
The changes are applied immediately.
Once activated, the system starts a one hour
massage cycle, made up of sequences of 6
minutes of massage followed by 3 minutes at
rest.
Door mirrors
► Move control A to the right or to the left to
select the corresponding mirror.
► Move control B in any of the four directions
to adjust.
As a safety measure, the mirrors should
be adjusted to reduce the "blind spots".
The objects that you see in the mirrors are
in fact closer than they appear. Take this
into account in order to correctly judge the
distance of vehicles approaching from behind.
The system automatically stops at the end of the
cycle; the indicator lamp for the button goes off.
► Return control A to its central position.
Manual folding
Steering wheel
adjustment
The mirrors can be folded manually (parking
obstruction, narrow garage, etc.).
► Turn the mirror towards the vehicle.
Demisting/Defrosting
The demisting/defrosting of the door
mirrors works with the demisting/
defrosting of the rear screen.
Electric folding
For more information on Rear screen
demisting/defrosting, refer to the
corresponding section.
Depending on equipment, the door mirrors can
be folded electrically.
► From the inside, with the
ignition on, place control A in the
central position.
► When stationary, pull the control to release
the steering wheel.
► Pull control A backwards.
► Lock the vehicle from the outside.
47
Ease of use and comfort
If the mirrors are folded using control A,
they will not unfold when the vehicle is
unlocked.
Interior rear view mirror
Rear head restraints
Electric unfolding
► From outside: unlock the vehicle.
► From inside: with the ignition on, place
control A in the central position and then pull it
rearwards.
Depending on version, the automatic
door mirror folding/unfolding function is
configured via the Driving / Vehicle touch
screen menu.
Otherwise, this setting can be carried out at a
PEUGEOT dealer or a qualified workshop.
The electrochrome system uses a sensor that
detects the level of exterior brightness and that
coming from the rear of the vehicle, in order to
automatically and gradually switch between day
and night usage.
Automatic tilting in reverse gear
Depending on version, this function allows to
automatically tilt the mirrors downwards to assist
with parking manoeuvres in reverse gear.
With the engine running, on engaging reverse
gear, the mirror glasses tilt downwards.
They return to their initial position:
– A few seconds after coming out of reverse
gear.
To ensure optimum visibility while
manoeuvring, the mirror automatically
brightens when reverse gear is engaged.
The system is deactivated if the load in the
boot exceeds the height of the load space
cover or if the load space cover has items
placed on it.
High position (use):
– Once the vehicle speed exceeds 6 mph
(10 km/h).
– When the engine is switched off.
This function is set via the Driving/
Vehicle touch screen menu.
► Pull the head restraint fully up.
Low position (stowing; when the seats are not
in use):
► Press the lugs A to release the head restraint
and push it down.
48
Ease of use and comfort
The rear head restraints can be removed.
► Check that the centre seat belt buckle is
stored in its housing.
Folding the backrests
3
Removing a head restraint
The folding of the backrest is
accompanied by a slight lowering of the
corresponding cushion.
► Pull the head restraint fully up.
► Press the lugs A to release the head restraint
and remove it completely.
To obtain a flat surface, it is necessary to
place the adjustable boot floor in the high
position.
When the backrest is released, the red
indicator in the release grip is visible.
► Store the head restraint.
Refitting a head restraint
► Insert the head restraint rods into the guides
in the corresponding seat backrest.
► Push the head restraint down as far as it will
go.
Folding from the passenger
compartment
► Press the lugs A to release the head restraint
and push it down.
Each section of the backrest has two release
controls:
– A grip 1 on the outer edge of the backrest.
– A lever 2 on the boot side trim (depending on
version).
Never drive with passengers seated at
the rear when the head restraints are
removed; the head restraints should be in
place and in the high position.
The backrests should only be
manoeuvred when the vehicle is
stationary.
The head restraint for the central
seat and those for the side seats
are not interchangeable.
First steps:
► Lower the head restraints.
► Lift up the rear armrest.
► If necessary, move the front seats forward.
► Check that no person or object might interfere
with the folding of the backrests (e.g. clothing,
luggage).
Rear bench seat
► Press the backrest release grip 1.
► Guide the backrest 3 down to the horizontal
position.
► Check that the outer seat belts are lying flat
on the backrests.
Bench seat with fixed cushions and split folding
backrests (2/3-1/3) to adapt the boot load space.
49
