Deutsch
EnglishEase of use and comfort -> Seat modularity for your Peugeot 3008 2016-2023
Ease of use and comfort
► While holding it by the sides at the plastic
covers, tilt the seat forwards.
► Simultaneously place both hooks located at
the front of the seat onto the coloured securing
lugs on the right and left at the bottom of the seat
well.
Seat modularity
3
Configuration examples
Check that the front hooks of the seat are
positioned correctly on the two lugs.
If they are not, you must remove the seat and
start the procedure again.
► Once the rear part of the seat has been
raised, take hold of each side of the seat
cushion, at the plastic covers, then bring the seat
towards you, keeping it at the same angle.
Repositioning the seats
These operations must be performed from the
boot sill.
7 seats
5 seats
Transport of
objects
As long as the seat is not in the correct
position, it must be held with both hands
by the sides, keeping it folded.
► Release the rear part of the seat which will
lock in place under its own weight.
The yellow lever G folds back automatically.
► Check in advance that the seat storage well
is empty and that the removable support is
properly secured against the front wall.
If the seat is not perfectly horizontal, do
not press on the backrest and do not try
to unfold it - risk of damaging the mechanism!
Take out the seat and start the operation
again.
6 seats
4 seats
By folding the second row seats and
retracting the third row seats, you obtain
55
Ease of use and comfort
a continuous storage floor through to the back
of the front seats.
Air distribution
regulate the automatic air conditioning
system.
By placing the front passenger seat in the
table position, you obtain a continuous
storage floor through to the dashboard.
► Operate the air conditioning system for at
least 5 to 10 minutes once or twice a month to
keep it in good working order.
► If the system does not produce cold air,
switch it off and contact a PEUGEOT dealer
or a qualified workshop.
Operations on the seats must only be
done when the vehicle is stationary.
When towing a large load on a steep gradient
in high temperatures, switching off the air
conditioning increases the available engine
power, enhancing the towing capacity.
Heating and Ventilation
Air intake
1. Windscreen demisting/de-icing vents
2. Front side window demisting/de-icing vents
3. Adjustable and closable side air vents
4. Adjustable and closable central air vents
5. Air outlets to the front footwells
6. Air outlets to the rear footwells
7. Adjustable and closable air vents, with blower
(depending on version)
Avoid driving for too long with the
ventilation off or with prolonged operation
of interior air recirculation. Risk of misting and
deterioration of the air quality!
The air circulating in the passenger compartment
is filtered and originates either from the
exterior, via the grille located at the base of the
windscreen, or from the inside in air recirculation
mode.
If the interior temperature is very high
after the vehicle has stood for a long
time in the sunshine, air the passenger
compartment for a few moments.
Put the air flow control at a setting high
enough to quickly change the air in the
passenger compartment.
Controls
Depending on version, the controls are
accessible in the Climate touch screen menu
or are grouped together on the centre console
panel.
Advice
Using the ventilation and air
conditioning system
► To ensure that air is distributed evenly,
keep the external air intake grilles at the base
of the windscreen, the nozzles, the vents, the
air outlets and the air extractor in the boot
free from obstructions.
Condensation created by the air
conditioning results in a discharge of
water underneath the vehicle. This is perfectly
normal.
► Do not cover the sunshine sensor located
on the dashboard; this sensor is used to
56
