Deutsch
EnglishCONTROLS -> Transporting children safely for your BMW 2 Series 2021-2025
Transporting children safely
CONTROLS
Transporting children safely
Vehicle features and options
Warning
Exposure to intense sunlight can cause child
restraint systems and their components to
become very hot. Persons may sustain burn
injuries when touching the hot components.
There is a risk of injury. Do not expose
the child restraint system to direct sunlight
or cover where necessary. If necessary, let
the child restraint system cool down before
transporting a child. Do not leave children un-
attended in the vehicle.
This chapter describes model-specific equip-
ment, systems, and functions that are currently
available, or may become available in the fu-
ture, even if they are not present in the vehicle.
Additional information:
Vehicle equipment, refer to page 8.
The right place for children
Safety information
Warning
Children in the rear seat
General information
Accident research shows that the safest place
for children is in the rear seat.
Unattended children or animals in the vehicle
can cause the vehicle to move and endanger
themselves and traffic, for example, due to
the following actions:
Children younger than 13 years of age or
shorter than 5 ft/150 cm should be transported
in the rear seat in suitable child restraint sys-
tems designed for the age, weight and size
of the child. Children 13 years of age or older
must wear a seat belt as soon as a suitable
child restraint system can no longer be used
due to their age, weight, or size.
▷
▷
▷
Pressing the Start/Stop button.
Releasing the parking brake.
Opening and closing the doors or win-
dows.
▷
▷
Engaging selector lever position N.
Using vehicle equipment.
There is a risk of accidents or injuries. Do not
leave children or animals unattended in the
vehicle. Take the vehicle key with you when
exiting and lock the vehicle.
Safety information
Warning
The seat belt cannot be fastened correctly
on children shorter than 5 ft/150 cm without
suitable additional child restraint systems.
The protective effect of safety gear, including
seat belts, can be limited or lost when seat
belts are fastened incorrectly. An incorrectly
fastened seat belt can cause additional inju-
ries, for instance in the event of an accident,
braking or evasive maneuvers. There is a risk
of injury or danger to life. Secure children
Warning
A hot vehicle may result in death to persons,
especially children, or animals. There is a
risk of injury or danger to life. Do not leave
people, especially children, or animals unat-
tended in the vehicle.
106
Transporting children safely
CONTROLS
shorter than 5 ft/150 cm using suitable child
restraint systems.
Safety information
Warning
Children on the front passenger
seat
The protective effect of child restraint sys-
tems and their fastening systems which have
been damaged or exposed to an accident
can be limited or lost. A child cannot be prop-
erly restrained in the event of an accident,
braking or evasive maneuvers. There is a risk
of injury or danger to life.
General information
Before using a child restraint system on the
front passenger seat, ensure that the front,
knee, and side airbags on the passenger's side
are deactivated.
Do not use child restraint systems which
have been damaged or exposed to an acci-
dent.
Additional information:
For automatic deactivation of front passenger
airbags, refer to page 157.
If attachment systems have been damaged
or strained by an accident, have them
checked and replaced by an authorized serv-
ice center or another qualified service center
or repair shop.
Safety information
Warning
Active front passenger airbags can injure a
child in a child restraint system when the air-
bags are deployed. There is a risk of injury.
Make sure that the front passenger airbags
are deactivated and that the PASSENGER
AIRBAG OFF indicator light illuminates.
Warning
The stability of the child restraint system is
limited or compromised with incorrect seat
setting or improper installation of the child
seat. There is a risk of injury or danger to life.
Make sure that the child restraint system fits
securely against the backrest. If possible, ad-
just the backrest tilt for all affected backrests
and correctly adjust the seats. Make sure that
seats and backrests are securely engaged or
locked. If possible and necessary, adjust the
height of the head restraints or remove them.
Installing child restraint
systems
General information
Pay attention to the specifications and the op-
erating and safety information of the child re-
straint system manufacturer when selecting,
installing, and using child restraint systems.
On the front passenger seat
Deactivating the airbags
Warning
Active front passenger airbags can injure a
child in a child restraint system when the air-
bags are deployed. There is a risk of injury.
Make sure that the front passenger airbags
107
Transporting children safely
CONTROLS
are deactivated and that the PASSENGER
AIRBAG OFF indicator light illuminates.
Child seat security
Before installing a child restraint system in the
front passenger seat, make sure that the front,
knee and side airbags on the passenger's side
are deactivated.
Additional information:
For automatic deactivation of front passenger
airbags, refer to page 157.
The seat belts in the rear and the front pas-
senger seat belt can be permanently locked to
fasten child restraint systems.
Seat position and height
After installing a child restraint system, move
the front passenger seat as far back as it will
go and, if possible, bring it up to the highest
position. This seat position and height ensure
the best possible position for the belt and of-
fers optimal protection in the event of an acci-
dent.
Locking the seat belt
1. Pull out the belt strap completely.
2. Secure the child restraint system with the
seat belt.
After mounting a universal child restraint sys-
tem, adjust the tilt of the seat backrest so that
the belt is not constrained.
3. Allow the belt strap to be pulled in and pull
it tight against the child restraint system.
The seat belt is disabled.
If the upper attachment point of the seat belt
is located in front of the belt guide of the child
restraint seat, move the front passenger seat
carefully forward until the best possible belt
guide position is reached.
Unlocking the seat belt
1. Unbuckle the seat belt buckle.
2. Remove the child restraint system.
3. Allow the belt strap to be pulled in com-
pletely.
Backrest width
Adjustable backrest width: Before installing a
child restraint system on the front passenger
seat, open the backrest width completely. Do
not change the backrest width again and do
not call up a memory position.
LATCH child restraint fixing
system
General information
LATCH: Lower Anchors and Tether for Chil-
dren.
Pay attention to the specifications, operating
tips and safety instructions from the child re-
straint system manufacturer when selecting,
installing, and using LATCH child restraint fix-
ing systems.
108
Transporting children safely
CONTROLS
Position
Mounts for lower anchors
Icon
Meaning
General information
The lower anchors may be used to attach the
CRS to the vehicle seat up to a combined child
and CRS weight of 65 lbs/30 kg when the child
is restrained by the internal harnesses.
The corresponding icon shows
the mounts for the lower
LATCH anchors.
Seats equipped with lower
mountings are marked with a
pair (2) of LATCH icons.
Safety information
For vehicles equipped with a
middle seat:
Warning
If the lower anchors on child restraint system
are not engaged correctly, the child restraint
system will not be able to provide suitable
protection. There is a risk of injury or danger
to life. Make sure that the lower mountings
are correctly engaged and that the child re-
straint system fits securely against the back-
rest.
It is not recommended to use
the inner lower mountings of
standard outer LATCH posi-
tions to fasten a child restraint
system on the middle seat.
Use the vehicle seat belt in-
stead for the middle seat.
Before attaching child restraint
systems
Pull the seat belt away from the area of the
child seat mountings.
Warning
The mounts for the lower mountings and at-
tachment points of the child restraint system
are intended for attaching child restraint sys-
tems only. If other objects are attached, the
mounts or attachment points can be dam-
aged. There is a risk of injury or risk of dam-
age to property. Only attach child restraint
systems at the corresponding mounts for the
lower mountings or attachment points.
Installing child restraint systems
1. Mount child restraint system, see manufac-
turer's information.
2. Make sure that the child restraint system
mount is correctly engaged in the lower an-
chor on both sides.
Child restraint systems with
tether strap
General information
When attaching child restraint systems to the
upper attachment points, observe the specifi-
cations and the operating and safety informa-
tion of the child restraint system manufacturer.
109
Transporting children safely
CONTROLS
Safety information
Attachment points for upper
retaining strap
Warning
Icon
Meaning
If the upper retaining strap is incorrectly used
for the child restraint system, the protective
effect is reduced. There is a risk of injury. En-
sure that the upper retaining strap is guided
to the upper attachment point without twist-
ing and not over sharp edges.
The respective icon shows the
attachment point for the upper
retaining strap. Seats with an
upper top tether are marked
with this icon. It is located on
the rear seat backrest, the rear
shelf or the rear seat.
Warning
Routing the retaining strap
If the rear seat backrest is not locked, the
protective effect of the child restraint system
is limited or nonexistant. In certain situations,
for instance braking maneuvers or in case of
an accident, the rear seat backrest can fold
forward. There is a risk of injury or danger to
life. Make sure that the rear seat backrests
are locked.
Warning
1
Driving direction
Head restraint
The mounts for the lower mountings and at-
tachment points of the child restraint system
are intended for attaching child restraint sys-
tems only. If other objects are attached, the
mounts or attachment points can be dam-
aged. There is a risk of injury or risk of dam-
age to property. Only attach child restraint
systems at the corresponding mounts for the
lower mountings or attachment points.
2
3
4
5
6
7
Hook for upper retaining strap
Attachment point
Rear shelf
Seat backrest
Upper retaining strap
Attaching the upper retaining strap
to the attachment point
1. Open the attachment point cover.
2. If necessary, raise the head restraint.
3. Guide the upper retaining strap between
the head restraint mounts or along both
sides of the head restraint to the attach-
ment point.
110
Transporting children safely
CONTROLS
4. Attach the hook of the retaining strap to the
attachment point.
5. Tighten the retaining strap.
111
