Deutsch
EnglishAdjusting -> Entering the rear for your BMW 6 Series 2011-2017
Adjusting
Controls
Adjusting the height
Entering the rear
Note
Keep the movement area unobstructed
When changing the seat position, keep
the seat's area of movement unobstructed;
otherwise, people might get injured or objects
damaged.◀
Folding back and locking the backrest
Adjusting electrically.
Before driving off, fold back and lock the
backrests; otherwise, an unexpected seat
movement may cause an accident.◀
Distance to the back of the head
Unlocking the backrest
▷
▷
Forward: pull.
Back: press the button and push the head
restraint toward the rear.
1. Pull lever up to the stop.
2. Fold backrest forward.
Adjusting the side extensions
Changing the seat position
Requirements
▷
▷
Vehicle at a standstill.
When the door is open, the seat is accessi‐
ble from the side on which the door is
open.
Fold forward for increased lateral support in
the resting position.
Removing
The head restraints cannot be removed.
61
Controls
Adjusting
Keep the movement area unobstructed
Controls
When changing the seat position, keep
the seat's area of movement unobstructed;
otherwise, people might get injured or objects
damaged.◀
At a glance
▷
▷
Press and hold this button until the seat
has moved to the desired position. Releas‐
ing the button stops window/roof move‐
ment.
Press button briefly. The seat automati‐
cally moves to the respective end position.
Pressing again stops the motion.
Storing
1. Switch on the ignition.
2. Set the desired position.
Folding back and locking the backrest
After entering the rear, fold the backrest back
and lock it.
3.
Press button. The LED in the but‐
ton lights up.
Press button. The seat moves to its origi‐
nal position. Pressing again stops the
motion.
4. Press selected button 1 or 2 while the LED
is lit. The LED goes out.
If the SET button is pressed accidentally:
Press button again.
The LED goes out.
Seat, mirror, and steering
wheel memory
The concept
Calling up settings
Two driver's seat and exterior mirror positions
can be stored per profile, refer to page 35, and
called up. Settings for the backrest width and
lumbar support are not stored in memory.
Comfort function
1. Open the driver's door.
2. Switch off the ignition.
3. Briefly press the desired button 1 or 2.
Hints
The corresponding seat position is performed
automatically.
Do not retrieve the memory while driving
Do not retrieve the memory setting while
driving, as an unexpected movement of the
seat could result in an accident.◀
The procedure stops when a reel for adjusting
the seat or one of the buttons is pressed.
62
