Deutsch
EnglishAdjusting -> Seat, mirror, and steering wheel memory for your BMW 6 Series 2011-2017
Controls
Adjusting
Keep the movement area unobstructed
Controls
When changing the seat position, keep
the seat's area of movement unobstructed;
otherwise, people might get injured or objects
damaged.◀
At a glance
▷
▷
Press and hold this button until the seat
has moved to the desired position. Releas‐
ing the button stops window/roof move‐
ment.
Press button briefly. The seat automati‐
cally moves to the respective end position.
Pressing again stops the motion.
Storing
1. Switch on the ignition.
2. Set the desired position.
Folding back and locking the backrest
After entering the rear, fold the backrest back
and lock it.
3.
Press button. The LED in the but‐
ton lights up.
Press button. The seat moves to its origi‐
nal position. Pressing again stops the
motion.
4. Press selected button 1 or 2 while the LED
is lit. The LED goes out.
If the SET button is pressed accidentally:
Press button again.
The LED goes out.
Seat, mirror, and steering
wheel memory
The concept
Calling up settings
Two driver's seat and exterior mirror positions
can be stored per profile, refer to page 35, and
called up. Settings for the backrest width and
lumbar support are not stored in memory.
Comfort function
1. Open the driver's door.
2. Switch off the ignition.
3. Briefly press the desired button 1 or 2.
Hints
The corresponding seat position is performed
automatically.
Do not retrieve the memory while driving
Do not retrieve the memory setting while
driving, as an unexpected movement of the
seat could result in an accident.◀
The procedure stops when a reel for adjusting
the seat or one of the buttons is pressed.
62
Adjusting
Controls
Safety mode
At a glance
1. Close the driver's door or reel on the igni‐
tion.
2. Press and hold the desired button 1 or 2
until the adjustment procedure is com‐
pleted.
Calling up of a seat position
deactivated
After a brief period, calling up stored seat posi‐
tions is deactivated to save battery power.
1
2
3
Adjustingꢀꢁ63
To reactivate calling up of a seat position:
Left/right, Automatic Curb Monitor
Fold in and outꢀꢁ64
▷
▷
▷
Open or close the door or trunk lid.
Press a button on the remote control.
Press the Start/Stop button.
Selecting a mirror
To change over to the other mirror:
Slide the switch.
Mirrors
Adjusting electrically
Exterior mirrors
The setting corresponds to the direc‐
tion in which the button is pressed.
General information
The mirror on the passenger side is more
curved than the driver's side mirror.
Saving positions
Seat, mirror, and steering wheel memory, refer
to page 62.
Depending on the vehicle equipment, the mir‐
ror setting is stored for the profile currently in
use. When the vehicle is unlocked via the re‐
mote control, the position is automatically re‐
trieved if this function is active.
Adjusting manually
In case of electrical malfunction press edges of
mirror.
Note
Estimating distances correctly
Automatic Curb Monitor
The concept
Objects reflected in the mirror are closer
than they appear. Do not estimate the distance
to the traffic behind you based on what you
see in the mirror, as this will increase your risk
of an accident.◀
If reverse gear is engaged, the mirror glass on
the front passenger side is tilted downward.
This improves your view of the curb and other
low-lying obstacles when parking, e.g.
63
