Mobility -> Engine oil for your BMW 6 Series 2017-2023

Mobility  
Engine oil  
Engine oil  
Vehicle features and options  
Electronic oil measurement  
Status display  
This chapter describes all standard, country-  
specific and optional features offered with the  
series. It also describes features that are not  
necessarily available in your vehicle, e. g., due  
to the selected options or country versions.  
This also applies to safety-related functions  
and systems. When using these functions and  
systems, the applicable laws and regulations  
must be observed.  
Concept  
The engine oil level is monitored electronically  
while driving and shown on the Control Dis‐  
play.  
If the engine oil level reaches the minimum  
level, a Check Control message is displayed.  
Functional requirements  
General information  
The engine oil consumption is dependent on  
the driving style and driving conditions.  
A current measured value is available after ap‐  
prox. 30 minutes of driving. During a shorter  
trip, the status of the last, sufficiently long trip  
is displayed.  
The engine oil consumption can increase in  
the following situations, for example:  
With frequent short-distance trips, regularly  
perform a detailed measurement.  
Sporty driving style.  
Break-in of the engine.  
Idling of the engine.  
Displaying the engine oil level  
Via iDrive:  
With use of engine oil types that are classi‐  
fied as not suitable.  
1. "Vehicle info"  
2. "Vehicle status"  
Therefore, regularly check the engine oil level  
after refueling.  
3.  
"Engine oil level"  
The engine oil level is displayed.  
The vehicle is equipped with electronic oil  
measurement.  
Engine oil level display messages  
The electronic oil measurement has two meas‐  
uring principles:  
Different messages appear on the display de‐  
pending on the engine oil level. Pay attention  
to these messages.  
Status display.  
Detailed measurement.  
If the engine oil level is too low within the next  
125 miles/200 km, add engine oil.  
A red indicator light indicates that the  
engine oil pressure is too low.  
NOTE  
An engine oil level that is too low causes  
engine damage. There is a risk of property  
damage. Immediately add engine oil.◀  
224  
 
Engine oil  
Mobility  
Take care not to add too much engine oil.  
NOTE  
The engine oil level is checked and displayed  
via a scale.  
Time: approx. 1 minute.  
Too much engine oil can damage the en‐  
gine or the catalytic converter. There is a risk  
of property damage. Do not add too much en‐  
gine oil. When too much engine oil is added,  
have oil level corrected by a dealer’s service  
center or another qualified service center or re‐  
pair shop.◀  
Adding engine oil  
General information  
Only add engine oil when the message is dis‐  
played in the instrument cluster. The quantity  
to be added is indicated in the message dis‐  
played in the instrument cluster.  
Detailed measurement  
Concept  
In the detailed measurement the engine oil  
level is checked when the vehicle is stationary,  
and displayed via a scale.  
Switch off the ignition and safely park the vehi‐  
cle before engine oil is added.  
Take care not to add too much engine oil.  
Safety information  
Gasoline engine:  
WARNING  
If the engine oil level reaches the minimum  
level, a Check Control message is displayed.  
Operating materials, e.g., oils, greases,  
coolants, fuels, can contain harmful ingredi‐  
ents. There is a risk of injuries or danger to life.  
Observe the instructions on the containers.  
Avoid the contact of articles of clothing, skin or  
eyes with operating materials. Do not refill op‐  
erating materials into different bottles. Store  
operating materials out of reach of children.◀  
During the measurement, the idle speed is in‐  
creased somewhat.  
General information  
A detailed measurement is only possible with  
certain engines.  
Functional requirements  
NOTE  
Vehicle is parked in a horizontal position.  
An engine oil level that is too low causes  
engine damage. There is a risk of property  
damage.  
Steptronic transmission: selector lever in  
selector lever position N or P and accelera‐  
tor pedal not depressed.  
Add engine oil within the next  
125 miles/200 km.◀  
Engine is running and is at operating tem‐  
perature.  
NOTE  
Performing a detailed measurement  
Using iDrive:  
Too much engine oil can damage the en‐  
gine or the catalytic converter. There is a risk  
of property damage. Do not add too much en‐  
gine oil. When too much engine oil is added,  
have oil level corrected by a dealer’s service  
center or another qualified service center or re‐  
pair shop.◀  
1. "Vehicle info"  
2. "Vehicle status"  
3.  
"Measure engine oil level"  
4. "Start measurement"  
225  
 
Mobility  
Engine oil  
Overview  
Gasoline engine  
The oil filler neck is located in the engine com‐  
partment, refer to page 221.  
BMW Longlife-01 FE.  
BMW Longlife-14 FE+.  
Opening the oil filler neck  
1. Opening the hood, refer to page 222  
2. Open the lid counterclockwise.  
The oil rating BMW Longlife-14 FE+ is only  
suitable for particular gasoline engines.  
More information about suitable engine oil rat‐  
ings and viscosities of engine oils is available  
at a dealer’s service center or another qualified  
service center or repair shop.  
Alternative engine oil types  
If an engine oil suitable for continuous use is  
not available, up to 1 US quart/liter of an en‐  
gine oil with the following oil rating can be  
added:  
3. Add engine oil.  
Gasoline engine  
BMW Longlife-01.  
Engine oil types to add  
API SL or superior oil rating.  
General information  
The engine oil quality is critical for the life of  
the engine.  
Viscosity grades  
Gasoline engine:  
When selecting an engine oil, make sure that  
the engine oil has the viscosity grade SAE  
0W-30 or SAE 0W-20. Alternatively, also en‐  
gine oils with viscosity grades SAE 5W-20,  
SAE 5W-30, SAE 0W-40 or SAE 5W-40 can  
be used.  
Safety information  
NOTE  
Oil additives can damage the engine.  
There is a risk of property damage. Do not use  
oil additives.◀  
The viscosity grades SAE 0W-20 or SAE  
5W-20 are only suitable for particular engines.  
NOTE  
Incorrect engine oil can cause malfunc‐  
tions in the engine or damage it. There is a risk  
of property damage. When selecting an engine  
oil, make sure that the engine oil has the cor‐  
rect oil rating.◀  
More information about suitable engine oil rat‐  
ings and viscosities of engine oils can be re‐  
quested from a dealer’s service center or an‐  
other qualified service center or repair shop.  
Suitable engine oil types  
You can add engine oils that meet the follow‐  
ing oil rating standards:  
226  
 
Engine oil  
Mobility  
Engine oil change  
NOTE  
Engine oil that is not changed in timely  
fashion can cause increased engine wear and  
thus engine damage. There is a risk of property  
damage. Do not exceed the service data indi‐  
cated in the vehicle.◀  
The vehicle manufacturer recommends that  
you have a dealer’s service center or another  
qualified service center or repair shop change  
the engine oil.  
227