Deutsch
EnglishMOBILITY -> Care for your BMW X1 2016-2022
Care
MOBILITY
Care
Distances and temperature
▷ Maximum temperature: 140 ℉/60 ℃.
Vehicle features and
options
▷ Minimum distance from sensors, cameras,
seals: 12 inches/30 cm.
This chapter describes all standard, country-spe‐
cific and optional features offered with the series.
It also describes features that are not necessarily
available in your vehicle, for instance, due to the
selected options or country versions. This also
applies to safety-related functions and systems.
When using these functions and systems, the
applicable laws and regulations must be ob‐
served.
▷ Minimum distance from glass sunroof:
31.5 in/80 cm.
Automatic vehicle washes
Safety information
NOTICE
Improper use of automatic vehicle washes can
cause damage to the vehicle. There is a risk of
damage to property. Follow the following in‐
structions:
Washing the vehicle
General information
Regularly remove foreign objects such as leaves
in the area below the windshield when the hood
is raised.
▷ Give preference to cloth vehicle washes or
those that use soft brushes in order to
avoid paint damage.
▷ Avoid vehicle washes with guide rails
higher than 4 in/10 cm to avoid damage to
the chassis.
Wash your vehicle frequently, particularly in win‐
ter. Intense soiling and road salt can damage the
vehicle.
▷ Observe the tire width of the guide rail to
avoid damage to tires and rims.
Steam blaster and high-pressure
washer
▷ Fold in exterior mirrors to avoid damage to
the exterior mirrors.
Safety information
▷ Deactivate the wiper and, if necessary, rain
sensor to avoid damage to the wiper sys‐
tem.
NOTICE
When cleaning with high-pressure washers,
components can be damaged due to the pres‐
sure or temperatures being too high. There is a
risk of damage to property. Maintain sufficient
distance and do not spray too long continu‐
ously. Follow the operating instructions for the
high-pressure washer.
276
Online Edition for Part no. 01402631131 - X/19
Care
MOBILITY
Completely remove all residues on the windows,
to minimize loss of visibility due to smearing and
to reduce wiper noises and wiper blade wear.
Driving into a vehicle wash with a
Steptronic transmission
Safety information
Vehicle care
NOTICE
Selector lever position P is automatically en‐
gaged when the ignition is switched off. There
is a risk of damage to property. Do not switch
ignition off in vehicle washes.
Vehicle care products
General information
BMW recommends using vehicle care and
cleaning products from BMW. Suitable care
products are available from a dealer’s service
center or another qualified service center or re‐
pair shop.
General information
In a vehicle wash, the vehicle must be able to roll
freely.
To roll or push the vehicle, refer to page 114.
Safety information
Some vehicle washes do not permit persons in
the vehicle. The vehicle cannot be locked from
the outside when in selector lever position N. A
signal sounds when an attempt is made to lock
the vehicle.
Warning
Cleansers can contain substances that are dan‐
gerous and harmful to your health. There is a
risk of injury. When cleaning the interior, open
the doors or windows. Only use products in‐
tended for cleaning vehicles. Follow the in‐
structions on the container.
Driving out of a vehicle wash
Ensure that the vehicle key is in the car.
Start the engine. Starting the engine, refer to
page 98.
Vehicle paint
Headlights
Do not rub wet headlights dry and do not use
abrasive or acidic cleaning agents.
General information
Regular care contributes to driving safety and
value retention. Environmental influences in
areas with elevated air pollution or natural con‐
taminants, such as tree resin or pollen can affect
the vehicle's paintwork. Tailor the frequency and
extent of your vehicle care to these influences.
Soak areas that have been dirtied, for instance
from insects, with shampoo and wash off with
water.
Thaw ice with de-icing spray; do not use an ice
scraper.
Aggressive substances such as spilled fuel, oil,
grease or bird droppings, must be removed im‐
mediately to prevent the finish from being altered
or discolored.
After washing the vehicle
After washing the vehicle, apply the brakes
briefly to dry them; otherwise, braking action can
be reduced. The heat generated during braking
dries brake discs and brake pads and protects
them against corrosion.
Matte finish
Only use cleaning and care products suitable for
vehicles with matte finish.
277
Online Edition for Part no. 01402631131 - X/19
Care
MOBILITY
not use abrasive cleaning agents or steam jets
above 140 ℉/60 ℃. Follow the manufacturer's
instructions.
Leather care
Remove dust from the leather regularly, using a
cloth or vacuum cleaner.
Aggressive, acidic or alkaline cleaning agents can
destroy the protective layer of adjacent compo‐
nents, such as the brake disc.
Otherwise, particles of dust and road grime chafe
in pores and folds, and lead to increased wear
and premature degradation of the leather sur‐
face.
After cleaning, apply the brakes briefly to dry
them. The heat generated during braking dries
brake discs and brake pads and protects them
against corrosion.
To guard against discoloration, such as from
clothing, clean leather and provide leather care
roughly every two months.
Clean light-colored leather more frequently be‐
cause soiling on such surfaces is substantially
more visible.
Chrome surfaces
Carefully clean components such as the radiator
grille or door handles with plenty of water, possi‐
bly with shampoo added, particularly when they
have been exposed to road salt.
Use leather care products; otherwise, dirt and
grease will gradually break down the protective
layer of the leather surface.
Rubber components
Upholstery material care
General information
Vacuum the upholstery regularly with a vacuum
cleaner.
Environmental influences can cause surface soil‐
ing of rubber parts and a loss of gloss. Use only
water and suitable cleaning agents for cleaning.
Treat especially worn rubber parts with rubber
care agents at regular intervals. When cleaning
rubber seals, do not use any silicon-containing
vehicle care products in order to avoid damage
or noises.
If upholstery is very dirty, for instance with bever‐
age stains, use a soft sponge or microfiber cloth
with a suitable interior cleaner.
Clean the upholstery down to the seams using
large sweeping motions. Avoid rubbing the ma‐
terial vigorously.
Fine wood parts
Clean fine wood facing and fine wood compo‐
nents only with a moist rag. Then dry with a soft
cloth.
Safety information
Plastic components
NOTICE
Open Velcro® fasteners on articles of clothing
can damage the seat covers. There is a risk of
damage to property. Ensure that any Velcro®
fasteners are closed.
NOTICE
Cleansers that contain alcohol or solvents, such
as lacquer thinners, heavy-duty grease remov‐
ers, fuel, or such, can damage plastic parts.
There is a risk of damage to property. Clean
with a microfiber cloth. Dampen the cloth lightly
with water, if needed.
Caring for special components
Light-alloy wheels
When cleaning the vehicle, use only neutral
Clean with a microfiber cloth.
wheel cleaners having a pH value from 5 to 9. Do
278
Online Edition for Part no. 01402631131 - X/19
Care
MOBILITY
Dampen the cloth lightly with water, if needed.
Do not soak the roofliner.
Sensor/camera lenses
To clean sensors and camera lenses, use a cloth
moistened with a small amount of glass deter‐
gent.
Safety belts
Displays/Screens/protective glass
of the Head-up Display
Warning
Chemical cleansers can destroy the safety belt
webbing. Missing protective effect of the safety
belts. There is a risk of injuries or danger to life.
Use only a mild soapy solution for cleaning the
safety belts.
NOTICE
Chemical cleansers, moisture or fluids of any
kind can damage the surface of displays and
screens. There is a risk of damage to property.
Clean with a clean, antistatic microfiber cloth.
Dirty belt straps impede the reeling action and
thus have a negative impact on safety.
Use only a mild soapy solution, with the safety
belts clipped into their buckles.
NOTICE
Safety belts should only be allowed to retract if
they are dry.
The surface of displays can be damaged with
improper cleaning. There is a risk of damage to
property. Avoid pressure that is too high and do
not use any scratching materials.
Carpets and floor mats
Clean with a clean, antistatic microfiber cloth.
Warning
Clean the protective glass of the Head-up Dis‐
play using a microfiber cloth and commercially
available dish-washing soap.
Objects in the driver's floor area can limit the
pedal distance or block a depressed pedal.
There is a risk of accident. Stow objects in the
vehicle such that they are secured and cannot
enter into the driver's floor area. Use floor mats
that are suitable for the vehicle and can be
safely attached to the floor. Do not use loose
floor mats and do not layer several floor mats.
Make sure that there is sufficient clearance for
the pedals. Ensure that the floor mats are se‐
curely fastened again after they were removed,
for instance for cleaning.
Long-term vehicle storage
When the vehicle is shut down for longer than
three months, special measures must be taken.
Further information is available from a dealer's
service center or another qualified service center
or repair shop.
Floor mats can be removed from the car's inte‐
rior for cleaning.
If the floor carpets are very dirty, clean with a mi‐
crofiber cloth and water or a textile cleaner. To
prevent matting of the carpet, rub back and forth
in the direction of travel only.
279
Online Edition for Part no. 01402631131 - X/19
