Deutsch
EnglishDoors and Locks -> Keyless Entry for your Ford Fiesta 2017-2023
Doors and Locks
Reinstalling the Lock Cylinder Cap
If the central locking function does not
operate, lock the doors individually using
the key in the position shown.
Left-Hand Side
Turn counterclockwise to lock.
Right-Hand Side
Turn clockwise to lock.
Unlocking the Doors
If the central locking function does not
operate, unlock the driver door and then
unlock all other doors individually by
pulling the interior door handles.
Note: When the doors have been unlocked
using this method, the doors must be locked
individually until the central locking function
has been repaired.
E244050
1. Place the cap over the lock cylinder.
2. Push the cap forward until it clicks into
place. Make sure you have properly
installed the cap by trying to move it
rearward.
Locking and Unlocking the Doors
Individually with the Key Blade
KEYLESS ENTRY
Principle of Operation
Locking the Doors
The system allows you to lock and unlock
your vehicle without taking the passive key
out of your pocket or purse.
E78276
E112203
57
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Doors and Locks
A valid passive key must be within one of
After locking the doors with the lock
sensor, there is a brief delay before you can
unlock your vehicle. This delay lets you
pull the handle to make sure your vehicle
is locked. When the delay period is over,
you can unlock the doors again, provided
the passive key is within the respective
detection range.
the three external detection ranges. These
are approximately 1.5 m (5 ft) from the
front door handles and the liftgate.
The system could not function if:
•
The passive key remains stationary for
about a minute.
•
•
•
The vehicle battery has no charge.
The passive key battery has no charge.
Unlocking the Doors
Unlock sensors are on the back of the
The passive key frequencies are
exterior front door handles.
jammed.
•
The passive key is too close to metal
objects or electronic devices, for
example keys or a cell phone.
If the system does not function, use the
remote control or the key blade to lock and
unlock your vehicle.
E248553
Touch the unlock sensor to unlock your
vehicle and disarm the alarm. The
Locking the Doors
direction indicators flash. Do not touch the
Lock sensors are on the top of the exterior
lock sensor on the top of the door handle.
front door handles.
Keep the door handle clean to make sure
the system correctly operates.
After unlocking the doors with the unlock
sensor, there is a brief delay before you can
lock your vehicle. When the delay period
is over, you can lock the doors again,
provided the passive key is within the
respective detection range.
E248554
Touch a lock sensor once to lock your
vehicle and arm the alarm. The direction
indicators flash.
Touch a lock sensor twice within three
seconds to double lock your vehicle and
arm the alarm. The direction indicators
flash. Do not touch the unlock sensor on
the back of the door handle.
Unlocking the Driver Door
You can program the unlocking function
so that only the driver door unlocks when
you touch the unlock sensor. See Locking
and Unlocking (page 54).
Keep the door handle clean to make sure
the system correctly operates.
Note: Your vehicle does not automatically
lock. If you do not touch a lock sensor your
vehicle remains unlocked.
58
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Doors and Locks
If you program the unlocking function so
Deactivated Passive Keys
that only the driver door unlocks, the
following occurs:
The system deactivates passive keys left
inside your vehicle when you lock it. You
cannot switch the ignition on using a
deactivated passive key. Press the unlock
button on the remote control to reactivate
a passive key.
•
If you open the driver door first, all
other doors remain locked. You can
unlock all of the other doors from inside
your vehicle using the power door lock
control on the driver door. You can
unlock individual doors by pulling the
interior door handles on those doors.
Switching Keyless Entry On or Off
1. Using the information display controls
•
If you open the front passenger door
first, all of the other doors and the
liftgate unlock.
on the steering wheel, select Settings.
2. Select Vehicle settings.
3. Select Locks.
4. Select KeyFree.
Unlocking the Liftgate
E190028
Press the exterior release button hidden
above the license plate.
Note: A valid passive key must be within
the detection range.
Locking the Liftgate
The liftgate locks after you fully close it.
Smart Unlocks for Passive Keys
If you electronically lock your vehicle with
a rear door or the liftgate open, the system
searches for a passive key inside your
vehicle after you close the last door. If the
system detects a key, all doors unlock
indicating that a key is inside.
Note: Your vehicle locks if another passive
key is within the detection range after you
close the last door.
59
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
