Deutsch
EnglishDriving Aids -> Cross Traffic Alert for your Ford Fiesta 2017-2023
Driving Aids
Blind Spot Information System Information Messages
Message
Action
BLIS not available Sensor Displays if the blind spot information system sensors are
blocked See manual blocked.
BLIS deactivated Trailer Displays if you attach a trailer to your vehicle.
attached
BLIS malfunction
The system has detected a fault that requires service. Have
your vehicle checked as soon as possible.
The system is designed to alert you of
vehicles approaching from the sides when
CROSS TRAFFIC ALERT
you shift into reverse (R).
Using the Cross Traffic Alert
System
WARNING: Do not use the cross
traffic alert system as a replacement for
using the interior and exterior mirrors or
looking over your shoulder before
reversing out of a parking space. The
cross traffic alert system is not a
The system is designed to detect vehicles
that approach with a speed up to 60 km/h
(37 mph). Coverage decreases when the
sensors are partially, mostly or fully
obstructed. Slowly reversing helps increase
the coverage area and effectiveness.
replacement for careful driving.
WARNING: The system may not
operate properly during severe weather
conditions, for example snow, ice, heavy
rain and spray. Always drive with due
care and attention. Failure to take care
may result in a crash.
The system turns on when you start the
engine and you shift into reverse (R). The
system turns off when you shift out of
reverse (R).
195
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Driving Aids
E142440
The sensor on the left-hand side is only
partially obstructed and zone coverage on
the right-hand side is maximized.
E142441
196
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Driving Aids
Zone coverage also decreases when
Note: Keep the sensors free from snow, ice
parking at narrow angles. The sensor on
the left-hand side is mostly obstructed and
zone coverage on that side is severely
reduced.
and large accumulations of dirt.
Note: Do not cover the sensors with bumper
stickers, repair compound or other objects.
Note: Blocked sensors could affect system
System Lights, Messages and
Audible Alerts
performance.
If the sensors are blocked, a message may
appear in the information display when
you shift into reverse (R). See
Information Messages (page 95).
System Limitations
The system may not correctly operate
when any of the following occur:
•
•
The sensors are blocked.
Adjacently parked vehicles or objects
are obstructing the sensors.
•
•
•
Vehicles approach at speeds greater
than 60 km/h (37 mph).
E142442
When the system detects a vehicle, an
indicator illuminates in the exterior mirror
on the side the approaching vehicle is
coming from. A tone sounds and a
message appears in the information
display.
Note: In exceptional conditions, the system
could alert you even when there is nothing
in the detection zone, for example a vehicle
passing in the distance.
The vehicle speed is greater than
12 km/h (7 mph).
You reverse out of an angled parking
space.
System Errors
If the system detects a fault a message
displays. See General Information (page
91).
Switching the System Off and On
Blocked Sensors
You can temporarily switch the system off
using the information display. See General
Information (page 91). When you switch
system off, a message displays. See
Information Messages (page 95).
Note: The system turns on each time you
switch the ignition on and you shift into
reverse (R). If you temporarily switch the
system off, it turns on the next time you
switch the ignition on.
E205199
The sensors are behind the rear bumper
on both sides of your vehicle.
197
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Driving Aids
Note: The system may not correctly operate
Note: Traffic sign data provided by the
navigation system contains information
integrated to the data carrier release.
when towing a trailer. For vehicles with a
trailer tow module and tow bar approved
by us, the system turns off when you attach
a trailer. For vehicles with an aftermarket
trailer tow module or tow bar, we
The system detects recognizable traffic
signs, for example:
•
•
•
•
Speed limit signs.
No overtaking signs.
Speed limit cancellation signs.
No overtaking cancellation signs.
recommend that you switch the system off
when you attach a trailer.
To permanently switch the system off,
contact an authorized dealer.
Note: The system may not detect all traffic
TRAFFIC SIGN RECOGNITION
Principle of Operation
signs and may incorrectly read signs.
Note: In cold and severe weather conditions
the system may not function. Rain, snow,
spray and large contrasts in lighting can all
prevent the sensor from correctly
functioning.
Note: If your vehicle has a suspension kit
not approved by us, the system may not
correctly function.
WARNING: You are responsible for
controlling your vehicle at all times. The
system is designed to be an aid and does
not relieve you of your responsibility to
drive with due care and attention. Failure
to follow this instruction could result in
the loss of control of your vehicle,
personal injury or death.
Note: Always fit Ford original parts when
replacing headlamp bulbs. Other bulbs may
reduce system performance.
The system turns on when you switch the
ignition on and you cannot switch the
system off.
WARNING: The system may not
operate properly if the sensor is blocked.
Keep the windshield free from
obstruction.
Using Traffic Sign Recognition
Setting the System Speed Warning
You can set the system speed warning to
alert you when the vehicle speed exceeds
the speed limit recognized by the system
by a certain speed tolerance.
The system is designed to detect traffic
signs to inform you of the current speed
limit and overtaking regulations. Detected
traffic signs appear in the information
display. The sensor is behind the interior
mirror.
Note: Do not carry out windshield repairs
in the immediate area surrounding the
sensor.
198
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
