Deutsch
EnglishDriving Aids -> Speed Sign Recognition for your Ford Fiesta 2017-2023
Driving Aids
Traffic Sign Recognition System Messages
Message
Action
Traffic sign recognition
Reduced performance
See manual
The traffic sign data provided by the navigation system is
unavailable due to weak or no signal. Wait for a short period
of time for the signal to improve. If the message continues
to appear, have your vehicle checked as soon as possible.
Note: In cold and severe weather conditions
the system may not function. Rain, snow,
SPEED SIGN RECOGNITION
Principle of Operation
spray and large contrasts in lighting can all
prevent the sensor from correctly
functioning.
Note: If your vehicle has a suspension kit
not approved by us, the system may not
correctly function.
Note: Always fit Ford original parts when
replacing headlamp bulbs. Other bulbs may
reduce system performance.
The system turns on when you switch the
ignition on and you cannot switch the
system off.
WARNING: You are responsible for
controlling your vehicle at all times. The
system is designed to be an aid and does
not relieve you of your responsibility to
drive with due care and attention. Failure
to follow this instruction could result in
the loss of control of your vehicle,
personal injury or death.
WARNING: The system may not
operate properly if the sensor is blocked.
Keep the windshield free from
obstruction.
Using Speed Sign Recognition
Setting the System Speed Warning
You can set the system speed warning to
alert you when the vehicle speed exceeds
the speed limit recognized by the system
by a certain speed tolerance.
The system is designed to detect speed
limit signs to inform you of the current
speed limit. Detected speed signs appear
in the information display. The sensor is
behind the interior mirror.
Note: The system remembers the last
setting when you start your vehicle.
Note: Do not carry out windshield repairs
in the immediate area surrounding the
sensor.
Note: Speed sign data provided by the
navigation system contains information
integrated to the data carrier release.
1. Using the information display controls
on the steering wheel, select Driver
assist..
2. Select Traffic sign recognition.
3. Select Activate Traff. Sign Recog..
4. Select Activate speed warning.
5. Select Speed warning.
Note: The system may not detect all speed
signs and may incorrectly read signs.
6. Select Tolerance.
7. Select a setting and press the OK
button.
200
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Driving Aids
When the system detects a speed limit
Speed Sign Recognition System
Display
sign, the speed limit appears in the
information display.
Note: If your vehicle has a navigation
system, stored speed sign data could
influence the indicated speed limit value.
E318471
Speed Sign Recognition System Messages
Message
Action
Traffic sign recognition
Reduced performance
See manual
The traffic sign data provided by the navigation system is
unavailable due to weak or no signal. Wait for a short period
of time for the signal to improve. If the message continues
to appear, have your vehicle checked as soon as possible.
Eco Mode System Display
You can view the instantaneous efficiency
level or the trip summary in the information
display.
ECO
Principle of Operation
The system is designed to monitor certain
driving characteristics to help you drive
more efficiently. See Economical Driving
(page 219).
Note: The efficiency levels do not result in
a defined fuel consumption figure. See Fuel
Consumption (page 146).
Note: The system only indicates the
efficiency level for the current trip. The
system resets each time you switch the
ignition on.
Instantaneous Efficiency Level
The display ring increases as the
instantaneous efficiency level increases
and illuminates when it reaches maximum
efficiency. The level continuously updates
to indicate the efficiency level for the
current trip.
To view the instantaneous efficiency level, use the information display controls
on the steering wheel to select the following:
Menu Item
MyView
Eco coach
Action
Press the menu button.
Press the OK button.
201
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
