Deutsch
EnglishInformation Displays-> for your Ford Fiesta 2017-2023
Information Displays
GENERAL INFORMATION
A
B
C
WARNING:Driving while distracted
can result in loss of vehicle control, crash
and injury. We strongly recommend that
you use extreme caution when using any
device that may take your focus off the
road. Your primary responsibility is the
safe operation of your vehicle. We
recommend against the use of any
hand-held device while driving and
encourage the use of voice-operated
systems when possible. Make sure you
are aware of all applicable local laws
that may affect the use of electronic
devices while driving.
E250032
A
B
C
Return button.
OK button.
Menu button.
Note: For your safety, some features are
speed-dependent. Their use is limited to
when your vehicle speed is not moving.
Return Button
Use the return button to go back or to exit.
OK Button
Information Display Controls
Use the OK button to make a selection.
You can also use it to scroll through a
menu.
Menu Button
Use the menu button on the main screen
to display the submenu.
Information Display Main Menu
Menu Item
E236983
Trip computer 1 or Trip computer 2
MyView
Driver assist.
Navigation
Audio
Phone
Settings
91
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Information Displays
See Information Displays (page 91).
TRIP COMPUTER
You can reset the trip computer and
personalize it using the information display.
Menu Item
Action
Trip computer 1
Press and hold the OK button until the system reset
confirmation appears.
Trip computer 2
Press and hold the OK button until the system reset
confirmation appears.
Alternatively you can reset individual trip
values.
Menu Item
Action
Trip computer 1
Press the menu button.
Trip computer 2
Press the menu button.
Reset individual values
Reset trip odometer
Press the OK button.
Press and hold the OK button until the system reset
confirmation appears.
Reset trip timer
Press and hold the OK button until the system reset
confirmation appears.
Reset average fuel
Reset average speed
Press and hold the OK button until the system reset
confirmation appears.
Press and hold the OK button until the system reset
confirmation appears.
Personalization
Navigate to the following main menu item.
Menu Item
Action
Trip computer 1
Trip computer 2
Configure view
Press the menu button.
Press the menu button.
Press the OK button.
92
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Information Displays
Menu Item
Trip odometer
Trip timer
Action
Press the OK button.
Press the OK button.
Average fuel consump- Press the OK button.
tion
Average speed
Press the OK button.
Press the OK button.
Press the OK button.
Distance to empty
Instantaneous fuel
Note: You can display a maximum of four values.
Average Speed
Trip Odometer
Indicates the average vehicle speed since
Registers the total distance since you last
you last reset the value.
reset the value.
Distance to Empty
Trip Timer
Indicates the approximate distance your
vehicle could travel on the fuel remaining
in the fuel tank. Changes in driving pattern
may cause the value to vary.
Registers the total time since you last reset
the value.
Average Fuel
Instantaneous Fuel
Indicates the current fuel consumption.
Indicates the average fuel consumption
since you last reset the value.
PERSONALIZED SETTINGS
Language
Menu Item
Action
Settings
Display
Press the menu button.
Press the OK button.
Language
Press the OK button. Choose your applicable setting.
93
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Information Displays
Measure Unit
Menu Item
Settings
Action
Press the menu button.
Display
Press the OK button.
Measurement unit
Press the OK button. Choose your applicable setting.
Temperature Unit
Menu Item
Settings
Action
Press the menu button.
Display
Press the OK button.
Temperature unit
Press the OK button. Choose your applicable setting.
Tire Pressure Unit (If Equipped)
Menu Item
Action
Settings
Press the menu button.
Press the OK button.
Display
Tyre pressure
Press the OK button. Choose your applicable setting.
Chimes
Menu Item
Action
Press the menu button.
Press the OK button.
Settings
Vehicle settings
Chimes
Press the OK button.
Parking space found
Information
Press the OK button.
Press the OK button.
94
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Information Displays
INFORMATION MESSAGES
Active Park Assist
Message
Description
Active Park malfunction The system has malfunctioned. Have your vehicle checked
as soon as possible.
Adaptive Cruise Control
Message
Description
Adaptive cruise control
malfunction
The system has malfunctioned. Have your vehicle checked
as soon as possible.
Adaptive cruise control
not available
The system is not available. See Using Adaptive Cruise
Control (page 176).
Adaptive cruise control
not available Sensor
blocked See manual
The radar has reduced visibility. See Using Adaptive Cruise
Control (page 176).
Cruise control active
Adaptive braking off
You have switched normal cruise control on. Adaptive braking
turns off.
Front sensor not aligned The system has malfunctioned. Have your vehicle checked
as soon as possible.
Adaptive cruise control
Driver resume control
The adaptive cruise has reinstated controls to the driver.
Adaptive cruise control
Speed too low to
activate
Your vehicle speed is too slow to activate the adaptive cruise.
Adaptive cruise control
Speed sign recognition
not available
Navigation system based speed limit information is not
available. If the message continues to appear, have your
vehicle checked as soon as possible.
Alarm
Message
Description
Vehicle alarm Start
vehicle to stop alarm
Displays when the alarm has been triggered due to unauthor-
ized entry.
95
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Information Displays
Automatic High Beam Control
Message
Description
Front camera Low visib- The camera has reduced visibility. Clean the windshield. If
ility Clean screen
the message continues to appear, have your vehicle checked
as soon as possible.
Front camera temporarily The camera has malfunctioned. Wait a short period of time
not available
for the camera to cool down. If the message continues to
appear, have your vehicle checked as soon as possible.
Front camera malfunc- The camera has malfunctioned. Have your vehicle checked
tion Service required
as soon as possible.
Auto-Start-Stop
Message
Description
Auto StartStop Press
Brake to Start Engine
The system needs to restart the engine but requires your
confirmation. Press the brake pedal to restart the engine.
Auto StartStop Press
clutch to start engine
The system needs to restart the engine but requires your
confirmation. Press the clutch pedal to restart the engine.
Auto StartStop Press a
Pedal to Start Engine
The system needs to restart the engine but requires your
confirmation. Press any pedal to restart the engine.
Auto StartStop Select
The system needs to restart the engine but requires your
Neutral To Start Engine confirmation. Shift into neutral (N) to restart the engine.
Auto StartStop Shift to
P, then Restart Engine
The system needs to restart the engine but requires your
confirmation. Shift into park (P) to restart the engine.
Auto StartStop Manual The system is not functioning. Restart the engine.
Restart Required
Auto StartStop malfunc- The system has malfunctioned. Have your vehicle checked
tion Service required
as soon as possible.
96
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Information Displays
Blind Spot Information and Cross Traffic Alert Systems
Message
Description
BLIS malfunction
The system has malfunctioned. Have your vehicle checked
as soon as possible.
BLIS not available Sensor The system sensors are blocked. See Blind Spot Informa-
blocked See manual tion System (page 193).
BLIS deactivated Trailer You have attached a trailer to your vehicle. The system turns
attached off.
Vehicle coming from left The system detects a vehicle. See Blind Spot Information
System (page 193).
Vehicle coming from right
Cross traffic alert
Displays instead of indication arrows when the system
detects a vehicle. Check for approaching traffic.
Cross traffic malfunction The system has malfunctioned. Have your vehicle checked
as soon as possible.
Cross traffic not available The system sensors are blocked. See Cross Traffic Alert
Sensor blocked See
manual
(page 195).
Cross traffic alert deactiv- You have attached a trailer to your vehicle. The system turns
ated Trailer attached
off.
Cross traffic alert
Applying brakes
The system applies the brakes. Check for approaching traffic.
Brake System
Message
Description
Check brake system
The system has malfunctioned. Stop your vehicle in a safe
place. Have your vehicle checked as soon as possible.
97
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Information Displays
Doors and Locks
Message
Driver door open
Passenger door open
Rear left door open
Rear right door open
Liftgate open
Description
The door listed is not completely closed.
Bonnet open
The hood is not completely closed.
Switches inhibited
Security mode
The system has disabled the door switches.
Driver Alert
Message
Description
Driver fatigue warning
Rest now
Take a break due to low alertness levels.
Driver fatigue warning
Rest suggested
We recommend that you take a break due to low alertness
levels.
Engine
Message
Description
Engine coolant overtem- Displays when the engine temperature is too high. Stop your
perature
vehicle as soon as it is safe to do so, switch the engine off
and allow it to cool. Have your vehicle checked as soon as
possible.
98
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Information Displays
Fuel System
Message
Description
Fuel level low
An early reminder of a low fuel condition.
Fuel level low distance
metric:##0 km to empty
Fuel level low distance
imperial:#0 miles to
empty
Check fuel fill inlet
Fuel pressure low
The fuel fill inlet may not be properly closed.
The system has malfunctioned. Have your vehicle checked
as soon as possible.
Water in fuel Drain filter The system detects there is excess water in the fuel filter.
Have your vehicle checked as soon as possible.
Headlamps
Message
Description
Check adaptive head-
lamps See manual
Displays if an electrical malfunction occurs with the headlamp
system. Have your vehicle checked as soon as possible.
Hill Start Assist
Message
Description
Hill start assist not avail- The system is not available. Have your vehicle checked as
able
soon as possible. See Hill Start Assist (page 158).
Lane Keeping System
Message
Description
Lane keeping system
malfunction Service
required
The system has malfunctioned. Have your vehicle checked
as soon as possible.
99
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Information Displays
Maintenance
Message
Description
Engine oil level low Add The engine oil level is low. Stop your vehicle as soon as it is
oil
safe to do so and switch the engine off. Check the engine oil
level. See Engine Oil Check (page 246). If the message
continues to appear, have your vehicle checked as soon as
possible.
Engine oil pressure low
The engine oil pressure is low. Stop your vehicle as soon as
it is safe to do so and switch the engine off. Check the engine
oil level. See Engine Oil Check (page 246). If the message
continues to appear, have your vehicle checked as soon as
possible.
Change engine oil soon The engine oil life remaining is 10% or less. See Engine Oil
Check (page 246).
Oil change required
Brake fluid level low
The oil life left is at 0%. See Engine Oil Check (page 246).
The brake fluid level is low or the brake system has
malfunctioned. See Brake Fluid Check (page 249). Have
your vehicle checked as soon as possible.
Power reduced to lower The engine has reduced power to help reduce high engine
engine temperature temperature.
Transport mode Contact Transport mode is on. This may not allow some features to
dealer
properly operate. Have your vehicle checked as soon as
possible.
Factory mode Contact
dealer
Factory mode is on. This may not allow some features to
properly operate. Have your vehicle checked as soon as
possible.
MyKey
Message
Description
Place key in backup loca- Displays when trying to create a MyKey and the key is not
tion
placed in the backup position. See Passive Key Backup
Position (page 44).
Key is already a MyKey
Displays when trying to create a MyKey with a key already
designated as a MyKey.
Hold OK to create MyKey Displays when creating a MyKey.
100
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Information Displays
Message
Description
Creation completed
Displays to confirm that a MyKey has been created.
Key restricted at next
start. Label this key
Displays to confirm that the key is restricted after you switch
the ignition off.
MyKey not created
Displays if the system fails to create a MyKey.
Hold OK to clear MyKeys Displays when clearing all MyKeys.
All MyKeys cleared
Displays to confirm that all MyKeys have been cleared.
Parking Aid
Message
Description
Parking aid malfunction The system has malfunctioned. Have your vehicle checked
as soon as possible.
Check Park Pilot
Check front Park Pilot
Check rear Park Pilot
Park Pilot not available
sensor blocked See
Manual
The system sensors are blocked. See Parking Aids (page
163).
Front Park Pilot not
available sensor blocked
See Manual
Rear Park Pilot not avail-
able Sensor blocked See
manual
Rear Park Pilot disabled You have attached a bike rack, trailer or other object near the
Trailer attached
sensors on the front or rear of your vehicle.
Parking Brake
Message
Description
Park brake applied
You have not released the parking brake and your vehicle
reaches 5 km/h (3 mph). If the message continues to appear
after you have released the parking brake, have your vehicle
checked as soon as possible.
101
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Information Displays
Pre-Collision Assist
Message
Description
Pre-collision assist not
available
The system has malfunctioned. Have your vehicle checked
as soon as possible.
Pre-collision assist not
The system sensors are blocked. See Pre-Collision Assist
available Sensor blocked (page 202).
Rear Window Lock
Message
Description
Child lock malfunction
See manual
The system has malfunctioned. Have your vehicle checked
as soon as possible.
Remote Control
Message
Description
Key battery low Replace The key battery is low. Change the battery as soon as
soon
possible.
Seatbelt Reminder
Message
Description
Rear belt monitor
malfunction Service
required
The system has malfunctioned. Have your vehicle checked
as soon as possible.
Selectable Drive Modes
Message
Description
Drive mode not available The system is not available. If it is still not available the next
time you switch the ignition on, the system has malfunc-
tioned. Have your vehicle checked as soon as possible.
102
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Information Displays
Stability Control
Message
Description
ESC Service required
The system has malfunctioned. Have your vehicle checked
as soon as possible.
Starting System
Message
Description
Full accessory power
active
Displays if you switch the ignition on and do not start the
engine.
Press brake to start
A reminder to press the brake pedal when starting your
vehicle.
Press clutch to start
A reminder to press the clutch pedal when starting your
vehicle.
Press brake and clutch to A reminder to press the brake and clutch pedals when starting
start your vehicle.
Cranking time exceeded Displays if your vehicle fails to start.
No key detected
The system does not detect a valid passive key inside your
vehicle.
Starting system
malfunction
The system has malfunctioned. Have your vehicle checked
as soon as possible.
Restart now or key is
needed
Displays if you switch the engine off and the system does not
detect a valid passive key inside your vehicle.
103
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Information Displays
Steering System
Message
Description
Steering loss Stop safely The system has malfunctioned. Stop your vehicle in a safe
place. Have your vehicle checked as soon as possible.
Steering malfunction
Service now
The system has malfunctioned. Have your vehicle checked
as soon as possible.
Steering assist malfunc-
tion Service required
Steering Lock Malfunc-
tion Service Now
Tire Pressure Monitoring System
Message
Description
Tyre pressure low
One or more tires on your vehicle have low tire pressure.
Tyre pressure monitor
malfunction
The system has malfunctioned. Have your vehicle checked
as soon as possible.
Tyre pressure sensor
malfunction
The system has malfunctioned or the spare tire is in use. If
the message continues to appear, have your vehicle checked
as soon as possible.
Transmission
Message
Description
Transmission malfunc-
tion Service now
The system has malfunctioned. Have your vehicle checked
as soon as possible.
Transmission Service
required
Transmissionovertemper- The transmission is overheating and needs to cool. Stop your
ature Stop safely
vehicle as soon as it is safe to do so, switch the engine off
and allow the transmission to cool. If the message continues
to appear, have your vehicle checked as soon as possible.
Transmission over-
heating Stop safely
Transmission too hot
Press brake
104
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Information Displays
Message
Description
Transmission limited
function See manual
The transmission has limited functionality. Have your vehicle
checked as soon as possible.
Transmission warming
up Please wait
Displays at low outside temperatures, if it takes a few seconds
for the transmission to engage a gear.
Fully press the brake pedal until the message disappears
from the information display.
Transmission not in Park Displays as a reminder to shift into park (P).
Press brake to unlock
selector lever
Press the brake pedal to unlock the transmission.
Selector lever unlocked Displays when the selector lever unlocks.
105
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
