Deutsch
EnglishMaintenance -> Removing a Headlamp for your Ford Fiesta 2017-2023
Maintenance
2
3
2
1
E183236
E236623
2. Disengage the wiper blade from the
wiper arm.
Note: Make sure that the wiper arm does
not spring back against the glass when the
wiper blade is not attached.
1. Use a suitable tool, for example a
screwdriver, to carefully remove the
trim clip.
Note: Raise the center pin and then remove
the clip.
3. To install, reverse the removal
2. Remove the screws.
procedure.
Note: Make sure that the wiper blade locks
into place.
REMOVING A HEADLAMP
WARNING: Switch the lamps and
the ignition off. Failure to do so could
result in serious personal injury.
E249609
3. Place your hand below the headlamp
housing and lift the headlamp at the
center area to disengage the lower
fixing clip.
4. Carefully lift the headlamp up at the
front and rear to disengage it from the
fixing points.
253
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Maintenance
Note: Take care when removing the
headlamp. There are rupture points adjacent
to the securing screws that are designed to
separate under impact.
5. Slightly rotate the rear of the headlamp
toward the center of the vehicle so that
it clears the front fender.
1
6. Move the headlamp slightly backwards
to clear the radiator grille panel. Then
lift the headlamp straight upward.
7. Disconnect the electrical connector.
8. Remove the headlamp.
2
9. To install, reverse the removal
E237938
procedure.
1. Carefully cut the trim to access the
lamp release wing nut.
REMOVING A REAR LAMP
2. Turn the wing nut counterclockwise to
Brake Lamp, Rear Lamp and
release the lamp.
Direction Indicator
Note: You cannot fully remove the wing
nut.
E237937
E236624
3. Remove the lamp.
4. Disconnect the electrical connector.
5. To install, reverse the removal
procedure.
254
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
