Deutsch
EnglishStability Control -> Using Stability Control-ST for your Ford Fiesta 2017-2023
Stability Control
Stability Control Warning Lamp
PRINCIPLE OF OPERATION
Electronic Stability Control
Flashes during operation. See
Warning Lamps and
Indicators (page 86).
WARNING:The system is designed
to aid the driver. It is not intended to
replace your attention and judgment.
You are still responsible to drive with due
care and attention.
USING STABILITY CONTROL -
EXCLUDING: ST
Note: The system automatically turns on
each time you switch the ignition on.
The system supports stability when your
vehicle starts to slide away from your
intended path. The system does this by
braking individual wheels and reducing
engine torque.
You can switch the traction control system
off and on . See Using Traction Control
(page 160).
The system also provides an enhanced
traction control function by reducing
engine torque if the wheels spin when you
accelerate. This helps to pull away on
slippery roads or loose surfaces, and
improves comfort by limiting wheel spin in
hairpin bends.
USING STABILITY CONTROL -
ST
WARNING: Do not switch off
stability control or use Sport, Track or
Drift mode when using a temporary
spare wheel or after inflating a tire using
the temporary mobility kit.
B
The system turns on each time you switch
the ignition on.
Reducing Stability Control
Press the button on the center
B
console. A warning lamp
illuminates and a message
appears in the information display. Press
the button again to switch the system on.
B
A
Note: Stability control only reduces and is
not fully switched off.
B
A
A
Note: If you switch stability control to
reduced mode, traction control turns off.
E72903
A
B
Without ESC.
With ESC.
161
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Stability Control
Switching the System Off
Press and hold the button on the
center console for a few seconds
to switch the system off. A
warning lamp illuminates and a message
appears in the information display. Press
the button again to switch the system on.
Note: If you switch stability control off,
traction control also turns off.
Note: If you use a programmed MyKey, you
cannot switch the system off.
Stability Control and Traction
Control Indicator
Flashes during operation.
If it does not illuminate when you
switch the ignition on, or remains
on when the engine is running, this
indicates a malfunction. Have your vehicle
checked as soon as possible.
Note: The system automatically turns off
if there is a malfunction.
Stability Control and Traction
Control Off Warning Lamp
Illuminates when you switch the
system off or to reduced mode.
It also illuminates if you select
track mode.
162
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
