Deutsch
EnglishComfort and Convenience Features for your Honda CR-V 1995-2000
Main Menu
Table of Contents
HeatingandCooling
Proper use of the Heating and
Cooling system can make the
interior dry and comfortable, and
keep the windows clear for best
visibility.
MODE CONTROL DIAL
RECIRCULATION
BUTTON
AIR
What Each Control Does
CONDITIONING
SWITCH
Fan Control Dial
Turning this dial clockwise increases
the fan's speed, which increases air
flow.
FAN CONTROL DIAL
TEMPERATURE CONTROL DIAL
Temperature Control Dial
Turning this dial clockwise increases
the temperature of the air flow.
Recirculation Button
This button controls the source of
the air going into the system. When
the indicator in this button is lit, air
from the vehicle's interior is sent
through the system again (Recircula-
tion mode). When the indicator is off,
air is brought in from outside the
vehicle (Fresh Air mode).
Air Conditioning (A/C) Button
This button turns the air condi-
tioning ON and OFF. The indicator
in the button lights when the A/C is
on.
Comfort and Convenience Features
Main Menu
Table of Contents
Heatingand Cooling
Mode Control Dial
Use the MODE control dial to select
the vents the air flows from.
Air flows from the center
and corner vents in the dashboard.
Air flow is divided between
the vents in the dashboard and the
floor vents.
Air flows from the floor
vents.
Air flow is divided between
the floor vents and the clef roster
vents at the base of the windshield.
Air flows from the defroster
vents at the base of the windshield.
When you select
the system
automatically switches to Fresh Air
mode and turns on the A/C.
Comfort and Convenience Features
Main Menu
Table of Contents
Heating and Cooling
Vent Controls
How to Use the System
This section covers how to set up the
system controls for ventilation,
heating, cooling, dehumidifying, and
defrosting.
SIDE VENT
CENTER VENT
The engine must be running for the
heater and air conditioning to
Open
Close
generate hot and cold air. The heater
uses engine coolant to warm the air.
If the engine is cold, it will be several
minutes before you feel warm air
coming from the system.
The air conditioning does not rely on
engine temperature.
You can adjust the direction of the
air coming from the dashboard vents
by moving the tab in the center of
each vent up-and-down and side-to-
side.
The vents in the corners of the
dashboard can be opened and closed
with the dials next to them.
Comfort and Convenience Features
Main Menu
Table of Contents
Heating and Cooling
It is best to leave the system in Fresh
Air mode under almost all conditions.
Keeping the system in Recirculation
mode, particularly with the A/C off,
can cause the windows to fog up.
Switch to Recirculation mode when
you are driving through smoky or
dusty conditions, then switch back to
Fresh Air mode when the condition
clears.
AIR CONDITIONING SWITCH
MODE CONTROL
DIAL
FAN CONTROL DIAL
TEMPERATURE
CONTROL DIAL
The outside air intakes for the
heating and cooling system are at
the base of the windshield. Keep
these clear of leaves and other
debris.
1. Turn the temperature control dial
Ventilation
all the way to the left.
Make sure the A/C is off.
The flow-through ventilation system
draws in outside air, circulates it
2. Select
and Fresh Air mode.
through the interior, then exhausts it
through vents near the rear window.
3. Set the fan to the desired speed.
CONTINUED
Comfort and Convenience Features
Main Menu
Table of Contents
Heating and Cooling
MODE CONTROL DIAL
ToCoolwithA/C
1. Turn on the A/C by pressing the
button. The light in the button
should come on when a fan speed
is selected.
RECIRCULATION
BUTTON
2. Make sure the temperature
control dial is all the way to the left.
3. Select
AIR
CONDITIONING
SWITCH
4. If the outside air is humid, select
Recirculation mode. If the outside
air is dry, select Fresh Air mode.
Set the fan to the desired speed.
REAR
DEFOGGER
SWITCH
TEMPERATURE CONTROL DIAL
FAN CONTROL DIAL
Air conditioning places an extra load
If the interior is very warm from
being parked in the sun, you can cool
it down more rapidly by setting up
the controls this way:
When the interior has cooled down
to a more comfortable temperature,
close the windows and set the
controls as described for normal
cooling.
on the engine. Watch the engine
coolant temperature gauge (see page
57) when driving in stop-and-go
traffic or climbing a long, steep hill.
If it moves near the red zone, turn
off the A/C until the gauge reads
normally.
1. Start the engine.
2. Turn on the A/C by pressing the
button. Make sure the tempera-
ture control dial is all the way to
the left.
3. Set the fan to maximum speed.
4. Open the windows partially. Select
and Fresh Air mode.
Comfort and Convenience Features
Main Menu
Table of Contents
Heating and Cooling
To Heat
To warm the interior:
To Defogand Defrost
To remove fog from the inside of the
windows:
To Heat and Dehumidify with Air
Conditioning
Air conditioning, as it cools, removes
moisture from the air. When used in
combination with the heater, it
makes the interior warm and dry.
1. Start the engine.
2. Select
3. Set the fan to the desired speed.
4. Adjust the warmth of the air with
the temperature control dial.
1. Switch the fan on.
2. Select
and Fresh Air mode.
When you select
the
system automatically switches to
Fresh Air mode and turns on the
A/C.
1. Switch the fan on.
2. Turn on the air conditioning.
3. Select
and Fresh Air mode.
3. Adjust the temperature control
dial so the air flow from the
defroster vents feels warm.
4. Turn on the rear window defogger
to help clear the rear window.
When you switch to another mode
4. Adjust the temperature control
dial so the mixture of heated and
cooled air feels comfortable.
This setting is suitable for all driving
conditions whenever the outside
temperature is above 32°F (0°C).
from
the A /C stays on.
Press the A/C button to turn it off.
CONTINUED
Comfort and Convenience Features
Main Menu
Table of Contents
Heating and Cooling
To remove exterior frost or ice from
the windshield and side windows
after the vehicle has been sitting out
in cold weather:
MODE CONTROL DIAL
1. Start the engine.
2. Select
When you select
the
system automatically switches to
Fresh Air mode and turns on the
A/C.
RECIRCULATION
BUTTON
AIR
3. Switch the fan and temperature
controls to maximum.
CONDITIONING
SWITCH
REAR
DEFOGGER
SWITCH
To rapidly remove exterior frost or
ice from the windshield (on very cold
days), first select the Recirculation
mode. Once the windshield is clear,
select the Fresh Air mode to avoid
fogging the windows.
TEMPERATURE CONTROL DIAL
FAN CONTROL DIAL
Comfort and Convenience Features
Main Menu
Table of Contents
Heating and Cooling
To Turn Everything Off
These settings direct all the air flow
to the defroster vents at the base of
the windshield and the side window
defroster vents. The air flow will get
warmer and clear the windows faster
as the engine warms up. You can
close the side vents with the dial
beside each vent. This will send
more warm air to the windshield
defroster vents.
To shut off the system temporarily,
turn the fan speed and temperature
control dials all the way to the left.
You should shut the system
completely off only for the first few
minutes of driving in cold weather,
until the engine coolant warms up
enough to operate the heater. Keep
the fan on at all other times so stale
air does not build up in the interior.
For safety, make sure you have a
clear view through all the windows
before driving away.
Comfort and Convenience Features
CR-V Value Package Audio System
Main Menu
Table of Contents
Audio System
Your vehicle should have one of the
audio systems described in this
section. Read the appropriate pages
in this section for operation of the
audio systems installed in your
vehicle.
LX Model
pages 119 to 134 for EX Model
Also, read page 114 or 136 for how to
take care of your cassette player.
If your vehicle has a different audio
system from these two types, read
the radio manufacturer's manual that
came with your vehicle for its
operation.
EX Model
Comfort and Convenience Features
CR-V Value Package Audio System
Main Menu
Table of Contents
Audio System
AM/FM/Cassette Stereo Audio
System
On LX model
Your Honda's audio system provides
clear reception on both AM and FM
bands, while the preset buttons allow
you to easily select your favorite
stations.
The cassette system features Dolby
B* noise reduction, automatic
sensing of chromium-dioxide (CrO )
2
tape, and autoreverse for continuous
play.
Dolby noise reduction manufactured under
*
license from Dolby Laboratories Licensing Corpo-
ration. "DOLBY" and the double-D symbol
are trademarks of Dolby Laboratories
Licensing Corporation.
Comfort and Convenience Features
CR-V Value Package Audio System
Main Menu
Table of Contents
Audio System
SEEK — The SEEK function
Operating the Radio
You can use any of four methods to
searches the band for a station with
a strong signal. To activate it, push
the SEEK switch up or down, then
release it. Depending on which way
you push the switch, the system
scans upward or downward from the
current frequency. It stops when it
finds a station with a strong signal.
The ignition switch must be in
ACCESSORY (I) or ON (II) to
operate the audio system. Turn the
system on by pushing the PWR/
VOL knob.
find radio stations on the selected
band: TUNE, SEEK, SCAN or the
Preset buttons.
TUNE — Use the TUNE bar to tune
the radio to a desired frequency.
Press the upper part (
to a higher frequency, or the lower
part ( ) to tune to a lower
) to tune
Adjust the volume by turning the
PWR/VOL knob.
frequency. The frequency numbers
will start to change rapidly. Release
the bar when the display reaches the
desired frequency. To change the
frequency in small increments, press
and release the TUNE bar quickly.
The band and frequency that the
radio was last tuned to is displayed.
To change bands, press the A M /FM
button. On the FM band, ST will be
displayed if the station is broadcast-
ing in stereo. Stereo reproduction on
AM is not available.
Comfort and Convenience Features
CR-V Value Package Audio System
Main Menu
Table of Contents
Audio System
SCAN — The SCAN function
samples all the stations with strong-
signals on the selected band. To
activate it, press the SCAN button,
then release it. When the system is
in the SCAN mode, SCN shows in
the display. The system will scan up
the band for a station with a strong
signal. When it finds one, it will stop
and play that station for
SCN INDICATOR
AM/FM
BUTTON
SCAN BUTTON
approximately five seconds. If you do
nothing, the system will then scan
for the next strong station and play
that for five seconds. When it plays a
station that you want to continue
listening to, press the SCAN button
again.
SEEK SWITCH
TUNE BAR
PWR/VOL
KNOB
CONTINUED
Comfort and Convenience Features
CR-V Value Package Audio System
Main Menu
Table of Contents
Audio System
Preset — You can store the
frequencies of your favorite radio
stations in the six preset buttons.
AM/FM BUTTON
Each button will store one frequency
on the AM band, and two
frequencies on the FM band.
To store a frequency:
1. Select the desired band, AM or
FM. FM1 and FM2 let you store
two frequencies with each Preset
button.
2. Use the TUNE or SEEK function
to tune the radio to a desired
station.
PRESET
BUTTONS
SEEK SWITCH
TUNE BAR
Once a station's frequency is stored,
simply press and release the proper
Preset button to tune to it.
The preset frequencies will be lost if
your vehicle's battery goes dead, is
disconnected, or the radio fuse is
removed.
3. Pick the Preset button you want
for that station. Press the button
and hold it until you hear a beep.
4. Repeat steps 1 to 8 to store a total
of six stations on AM and twelve
on FM.
Comfort and Convenience Features
CR-V Value Package Audio System
Main Menu
Table of Contents
Audio System
Adjusting the Sound
BASS/FADER
CONTROL
TREBLE/BALANCE
CONTROL
Balance/Fader — These two
controls adjust the strength of the
sound coming from each speaker.
The Balance control adjusts the side-
to-side strength, while the Facler
control adjusts the front-to-back
strength.
To adjust the fader, push on the
BASS/FADER control knob to get it
to pop out. Pull it out slightly farther,
and adjust the front-to-back sound to
your liking. Push the knob back in
when you are done so you cannot
change the setting by accidentally
bumping it.
Treble/Bass — Use these controls
to adjust the tone to your liking.
To adjust the Bass level, push on the
BASS/FADER control knob to get it
to pop out. Without pulling it out
farther, turn the knob to adjust the
bass level. Push the knob back in
when you are done so you cannot
change the setting by accidentally
bumping it.
To adjust the balance, push on the
TREBLE/BALANCE control knob
to get it to pop out. Pull it out slightly
farther, and adjust the side-to-side
sound to your liking. Push the knob
back in when you are clone so you
cannot change the setting by
To adjust the Treble level, push on
the TREBLE/BALANCE control
knob to get it to pop out. Without
pulling it out farther, turn the knob
to adjust the treble level. Push the
knob back in when you are done so
you cannot change the setting by
accidentally bumping it.
Radio Frequencies and Reception
For information, See page 125 .
accidentally bumping it.
Comfort and Convenience Features
CR-V Value Package Audio System
Main Menu
Table of Contents
Audio System
Audio System Lighting
Dolby B noise reduction turns on
when you insert a cassette. If the
tape was not recorded with Dolby B
noise reduction, turn it off by
If the system reaches the end of the
tape while in fast forward or rewind,
it automatically stops that function,
reverses direction, and begins to play.
You can use the instrument panel
brightness control knob to adjust the
illumination of the audio system (see
page 61). The audio system
pressing the
button.
illuminates when the parking lights
are on, even if the radio is turned off.
SKIP — The Skip Function allows
you to find the beginning of a song
or passage. To find the beginning of
the song or passage currently
playing, push the SKIP switch clown.
You will see REW flashing in the
display as the tape rewinds. To find
the beginning of the next song, push
the SKIP switch up. You will see FF
flashing in the display as the tape
fast forwards. When the system
finds the beginning of a song or
passage, it goes back to PLAY mode.
When the system reaches the end of
the tape, it will automatically reverse
direction and play the other side. If
you want to remove the cassette
from the drive, press the EJECT
button.
Operating the Cassette Player
Turn the audio system ON. Make
sure the tape opening on the cassette
is facing to the right, then insert the
cassette most of the way into the slot.
The system will pull it in the rest of
the way, and begin to play.
Tape Search Functions
With a cassette playing, you can use
the FF, REW, SKIP, or REPEAT
function to find a desired program.
The tape direction indicator will light
to show you which side of the
cassette is playing. The
indicates
FF/REW — Fast Forward and Re-
wind move the tape rapidly. To re-
wind the tape, push the REW button.
You will see REW in the display. To
fast forward the tape, push the FF
button. You will see FF displayed.
Press the PLAY button to take the
system out of rewind or fast forward.
the side you inserted lacing upward
is now playing. If you want to play
the other side, press the PROG
button.
Comfort and Convenience Features
CR-V Value Package Audio System
Main Menu
Table of Contents
Audio System
REPEAT - The Repeal function
continuously replays the current
song or passage. Press the RPT
button to activate it; you will see RPT
displayed as a reminder. When the
system reaches the end of the song
or passage currently playing, it will
automatically go into rewind. When
it senses the beginning of the same
song or passage, the system returns
to PLAY mode. It will continue to
repeat this same program until you
deactivate REPEAT by pressing the
button again.
EJECT BUTTON
RPT BUTTON
CASSETTE SLOT
REW BUTTON
TAPE DIRECTION
INDICATOR
FF BUTTON
PLAY BUTTON
SKIP SWITCH
PROG BUTTON
DOLBY BUTTON
C O N T IN U E D
Comfort and Convenience Features
CR-V Value Package Audio System
Main Menu
Table of Contents
Audio System
The SKIP and REPEAT functions
use silent periods on the tape to find
the end of a song or passage. These
features may not work to your
CASSETTE SLOT
FF BUTTON
TAPE DIRECTION
INDICATOR
EJECT BUTTON
RPT BUTTON
REW BUTTON
satisfaction if there is almost no gap
between selections, a high noise
level between selections, or a silent
period in the middle of selection.
Caring for Cassettes
Damaged cassettes can jam inside
the drive or cause other problems.
See page 136 for information on
cassette care and protection.
PLAY BUTTON
PROG BUTTON
DOLBY BUTTON
SKIP SWITCH
Comfort and Convenience Features
CR-V Value Package Audio System
Main Menu
Table of Contents
Audio System
Operating the Optional CD
Player/Changer
RANDOM INDICATOR
AM/FM BUTTON
A Compact Disc changer is available
from your dealer. It holds up to six
discs, providing several hours of
continuous entertainment. You
operate the CD changer with the
same controls used for the radio and
cassette player.
TAPE/CD BUTTON
REPEAT INDICATOR
Your dealer also has an accessory in-
dash single CD player available that
is operated by the radio controls. To
operate this unit, use the instructions
(except for those relating to multiple
discs) in this section.
Using the instructions that came
with the changer, load the desired
CDs in the magazine, and load the
magazine in the changer. Play only
standard round discs. Odd-shaped
CDs may jam in the drive or cause
other problems.
PWR/VOL KNOB
RPT BUTTON
SKIP SWITCH
PRESET BUTTONS
CONTINUED
Comfort and Convenience Features
CR-V Value Package Audio System
Main Menu
Table of Contents
AudioSystem
To operate the CD changer or player, You can use the SKIP switch to
REPEAT — When you activate the
Repeat feature by pressing the RPT
button, the system continuously
replays the current track. You will
see RPT in the display as a reminder.
Press the RPT button again to turn it
off.
the ignition must be in ACCESSORY
(I) or ON (II) and the audio system
must be on.
select tracks within a disc. If you
push and releasethe SKIP switch,
the system will move to the
beginning of a track. Push (he switch
up to move to the beginning of the
next track, and push the switch
down to move to the beginning of
the current track.
Press the CD button until "CD"
appears in the display. The system
will start to play the first track of the
first disc in the magazine. Play only
standard round discs.
RANDOM PLAY — This feature
,
when activated, plays the tracks on a
CD in random order, rather than in
the order they are recorded on the
CD. To activate Random Play, press
and hold the RPT button until you
see RDM in the display. The system
will then select and play tracks
randomly on the current disc. When
all tracks on that disc have been
played, the next disc is loaded and
played randomly. This continues
until you deactivate Random Play by
pressing RPT again.
If you push and hold the SKIP switch,
you will hear a beep and the system
will continue to move across tracks.
Release the switch when you think it
has reached the desired place on the
disc.
When that disc ends, the next disc in
the magazine is loaded and played.
After the last disc finishes, the
system returns to disc 1.
To select a different disc, press the
appropriate preset button (1 —6). If
you select an empty slot in the
magazine, the changer will, after
finding that slot empty, try to load
the CD in the next slot. This
continues until it finds a CD to load
and play.
Comfort and Convenience Features
CR-V Value Package Audio System
Main Menu
Table of Contents
Audio System
If the system is in Repeal mode, you
must turn it off by pressing RPT
before you can select Random Play.
Then press the button again until
you see RDM displayed.
AM/FM BUTTON
RANDOM INDICATOR
TAPE/CD BUTTON
REPEAT INDICATOR
To take the system out of CD mode,
press the A M /FM button or insert a
cassette in the player. If a tape is
already in the cassette player, press
the TAPE button. When you return
to CD mode, play will continue at the
same disc and track.
If you turn the system off while a CD
is playing, either with the PWR/VOL
knob or the ignition switch, play will
continue at the same disc and track
when you turn it back on.
PRESET BUTTONS
SKIP SWITCH
RPT BUTTON
PWR/VOL KNOB
Protecting Compact Discs
For information on how to handle
and protect compact discs, see page
130.
Comfort and Convenience Features
CR-V Value Package Audio System
Main Menu
Table of Contents
AudioSystem
CD Changer Error Indications
If you see an error indication in the
display while operating the CD
changer, find the cause in the chart
to the right. If you cannot clear the
error indication, take the vehicle to
your Honda dealer.
Comfort and Convenience features
CR-V Value Package Audio System
Main Menu
Table of Contents
AudioSystem
AM/FM/CD Audio System
On EX model
Your Honda's audio system provides
clear reception on both AM and FM
bands, while the preset buttons allow
you to easily select your favorite
stations.
The anti-theft feature will disable the
system if it is disconnected from the
vehicle's battery. To get the system
working again, you must enter a
code number (see page 137 ).
Comfort and Convenience Features
CR-V Value Package Audio System
Main Menu
Table of Contents
Audio System
Operating the Radio
SEEK — The SEEK function
searches the band for a station with
a strong signal. To activate it, press
TUNE — Use the TUNE bar to tune
the radio to a desired frequency.
The ignition switch must be in
ACCESSORY (I) or ON (II) to
operate the audio system. Turn the
system on by pushing the PWR/
VOL knob. Adjust the volume by
turning the same knob.
Press the
side of the bar to tune
to a higher frequency, and the
the SEEK bar on either the
side, then release it.
or
side to tune to a lower
frequency. The frequency numbers
will start to change rapidly. Release
the bar when the display reaches the
desired frequency. To change the
frequency in small increments, press
and release the TUNE bar quickly.
Depending on which side you press,
the system scans upward or down-
ward from the current frequency. It
stops when it finds a station with a
strong signal.
The band and frequency that the
radio was last tuned to is displayed.
To change bands, press the A M /FM
button. On the FM band, ST will be
displayed if the station is broadcast-
ing in stereo. Stereo reproduction on
AM is not available.
You can use any of four methods to
find radio stations on the selected
band: TUNE, SEEK, SCAN or the
Preset buttons.
Comfort and Convenience Features
CR-V Value Package Audio System
Main Menu
Table of Contents
Audio System
SCAN — The SCAN function
samples all the stations with strong
signals on the selected band. To
activate it, press the SCAN button,
then release it. When the system is
in the SCAN mode, SCAN shows in
the display. The system will scan up
the band for a station with a strong
signal. When it finds one, it will stop
and play that station for
AM/FM BUTTON
STEREO INDICATOR
TUNE BAR
PWR/VOL
KNOB
approximately five seconds. If you do
nothing, the system will then scan
for the next strong station and play
that for five seconds. When it plays a
station that you want to continue
listening to, press the SCAN button
again.
Preset — You Can store the
frequencies of your favorite radio
stations in the six preset buttons.
Each button will store one frequency
on the AM band, and two
SCAN
BUTTON
PRESET BUTTONS
SEEK BAR
frequencies on the FM band.
CONTINUED
Comfort and Convenience Features
CR-V Value Package Audio System
Main Menu
Table of Contents
AudioSystem
To store a frequency:
1. Select the desired band, AM or
FM. FM1 and FM2 let you store
two frequencies with each Preset
button.
2. Use the TUNE or SEEK function
to tune the radio to a desired
station.
3. Pick the Preset button you want
for that station. Press the button
and hold it until you hear a beep.
4. Repeat steps 1 to 3 to store a total
of six stations on AM and twelve
on FM.
Once a station's frequency is stored.
simply press and release the proper
Preset button to tune to it.
The preset frequencies will be lost if
your vehicle's battery goes dead, is
disconnected, or the radio fuse is
removed.
Comfort and Convenience Features
CR-V Value Package Audio System
Main Menu
Table of Contents
Audio System
AUTO SELECT — If you are
traveling far from home and can no
longer receive the stations you
preset, you can use the Auto Select
feature to find stations in the local
area.
TUNE BAR
SEEK BAR
To activate Auto Select, press the
A. SEL button. A. SEL will flash in
the display, and the system will go
into scan mode for several seconds.
It automatically scans both bands,
looking for stations with strong
signals; It stores the frequencies of
six AM stations and twelve FM
stations in the preset buttons. You
can then use the preset buttons to
select those stations.
AUTO SELECT lNDICATOR
SCAN BUTTON
A. SEL BUTTON
If you do not like the stations Auto
Auto Select does not erase the
frequencies that you preset pre-
viously. When you return home, turn
off Auto Select by pressing the
A. SEL button. The preset buttons
will then select the frequencies you
originally set.
Select has stored you can store
other frequencies in the preset
buttons. Use the TUNE, SEEK, or
SCAN function to find the desired
frequencies, then store them in the
selected preset buttons as described
previously.
If you are in a remote area, Auto
Select may not find six strong AM
stations or twelve strong FM stations.
If this happens, you will see a "0"
displayed when you press any preset
button that does not have a station
stored.
Comfort and Convenience Features
CR-V Value Package Audio System
Main Menu
Table of Contents
Audio System
Adjusting the Sound
Balance/Fader — These two
controls adjust the strength of the
sound coming from each speaker.
The Balance control adjusts the side-
to-side strength, while the Fader
control adjusts the front-to-hack
strength.
To adjust the fader. push on the
BASS/FADER control knob to get it
to pop out. Pull it out slightly farther,
and adjust the front-to-back sound to
your liking. Push the knob back in
when you arc done so you cannot
change the setting by accidentally
bumping it.
TREBLE/BALANCE
CONTROL
BASS/FADER
CONTROL
To adjust the Bass level, push on the
BASS/FADER control knob to get it
to pop out. Without pulling it out
farther, turn the knob to adjust the
bass level. Push the knob back in
when you are clone so you cannot
change the setting by accidentally
bumping it.
Treble/Bass — Use these controls
to adjust the tone to your liking.
To adjust the Treble level, push on
the TREBLE/BALANCE control
knob to get it to pop out. Without
pulling it out farther, turn the knob
to adjust the treble level. Push the
knob back in when you are done so
you cannot change the setting by
accidentally bumping it.
To adjust the balance, push on the
TREBLE/BALANCE control knob
to get it to pop out. Pull it out slightly
farther, and adjust the side-to-side
sound to your liking. Push the knob
back in when you are done so you
cannot change the setting by
accidentally bumping it.
Comfort and Convenience Features
