Deutsch
EnglishDriver and Passenger -> Additional Information About Your Seat Belts for your Honda CR-V 1995-2000
Table of Contents
Main Menu
Additional Information About Your Seat Belts
Seat Belt System Components
Lap/Shoulder Belt
way and will not get closed in the
door.
Your seat belt system includes lap/
shoulder belts in the front seats and
the outer back seats, and a lap belt in
the center back seat.
All lap/shoulder belts have an
emergency locking retractor.
In normal driving, the retractor lets
you move freely in your seat while it
keeps some tension on the belt.
During a collision or sudden stop,
the retractor automatically locks the
belt to help restrain your body.
The seat belt system also
includes a light on the
instrument panel to remind you and
your passengers to fasten your belts.
If the driver's seat belt is not
fastened before the ignition is turned
ON (II), the light will come on and a
beeper will also sound. The beeper
will stop after a few seconds, but the
light will stay on until the driver's
seat belt is fastened.
All the lap/shoulder belts except the
driver's have an additional locking
mechanism that must be activated to
secure a child seat. (See pages
30 and 34 for instructions on how to
secure child seats with this type of
seat belt.)
This seat belt has a single belt that
goes over your shoulder, across your
chest and across your hips.
To fasten the belt, insert the latch
plate into the buckle, then tug on the
belt to make sure the buckle is
latched.
To unlock the belt, push the red
PRESS button on the buckle.
Guide the belt across your body to
the door pillar. After exiting the
vehicle, be sure the belt is out of the
If the shoulder part of the belt is
pulled all the way out, the locking
mechanism will activate. The belt
will retract, but it will not allow the
passenger to move freely.
Driver and Passenger Safety
Table of Contents
Main Menu
Additional InformationAbout Your Seat Belts
To deactivate the locking
Seat Belt Maintenance
mechanism, unlatch the buckle and
let the seat belt fully retract. To
refasten the belt, pull it out only as
far as needed.
For safety, you should check the
condition of your seat belts regularly.
Pull each belt out fully and look for
frays, cuts, burns, and wear. Check
that the latches work smoothly and
that the lap/shoulder belts retract
easily. Any belt not in good condition
or not working properly will not
provide good protection and should
be replaced as soon as possible.
See page 15 for instructions on how
to wear the lap/shoulder bell
properly.
Lap Belt
The lap belt has one manually-
adjusted belt that fits across the hips.
To fasten the belt, insert the latch
U.S. Models
plate into the buckle marked
CENTER, then tug on the belt to
make sure the buckle is latched.
Honda provides a lifetime warranty
on seat belts. Honda will repair or
replace any seat belt component that
fails to function properly during
normal use. Please see your Honda
WarrantyInformationbookletfor
details.
To unlock the belt, push the red
PRESS button.
See page 16 for how to lengthen the
lap belt, and how to properly position
the belt.
CONTINUED
Driver and Passenger Safety
