Deutsch
EnglishControls -> Climate Control System for your Honda CR-V 2011-2015
Climate Control System*
Using Automatic Climate Control
The automatic climate control system maintains the interior temperature you select.
The system also selects the proper mix of heated or cooled air that raises or lowers
the interior temperature to your preference as quickly as possible.
1Using Automatic Climate Control
If any button is pressed while in AUTO, the function
of that button takes priority.
The AUTO indicator goes off, but functions of other
buttons pressed are still in auto mode.
To prevent cold air from blowing in from outside, the
fan may operate at low speed for a while after the
AUTO button has been pressed.
Dashboard vents Dashboard and Floor vents
and back of the floor vents and
Floor and
defroster vents
center console
back of the
center console
If the interior is very warm, you can cool it down
more rapidly by partially opening the windows,
turning the system on AUTO, and setting the
temperature to low. Change the fresh air mode to
recirculation mode until the temperature cools down.
AUTO Button
Passenger's Side
Temperature
Control Dial
Driver's Side
Temperature
Control Dial
(Recirculation) Button
When you set the temperature to the lower or upper
/
(Fan Control) Buttons
limit, Lo or Hi is displayed.
A/C (Air Conditioning) Button
Use the system when the engine is running.
Pressing the
button switches the climate
control system between on and off. When turned on,
the system returns to your last selection.
1. Press the AUTO button.
2. Adjust the interior temperature using the driver's side or passenger’s side
temperature control dial.
While in ECON mode, the system has greater
temperature fluctuations.
3. Press the
button to cancel.
â–
Switching between the recirculation and fresh air modes
Press the
button and switch the mode depending on environmental conditions.
Recirculation mode (indicator on): Recirculates air from the vehicle’s interior through
the system.
Fresh air mode (indicator off): Maintains outside ventilation. Keep the system in
fresh air mode in normal situations.
* Not available on all models
200
uuClimate Control System*uUsing Automatic Climate Control
1Defrosting the Windshield and Windows
Defrosting the Windshield and Windows
â–
For your safety, make sure you have a clear view
through all the windows before driving.
Pressing the
button turns the air
conditioning system on and automatically
switches the system to fresh air mode.
Do not set the temperature near the upper or lower
limit.
When cold air hits the windshield, the outside of the
Pressing the
system returns to the previous settings.
button again to turn off, the
If the side windows fog up, adjust the vents so that
the air hits the side windows.
â–
To rapidly defrost the windows
1To rapidly defrost the windows
After defrosting the windows, switch over to fresh air
mode. If you keep the system in recirculation mode,
the windows may fog up from humidity. This
impedes visibility.
1. Press the
2. Press the
button.
button.
201
uuClimate Control System*uSynchronized Mode
Synchronized Mode
1Synchronized Mode
When you press the
button, the system changes
to synchronized mode.
When the system is in dual mode, the driver side
temperature and the passenger side temperature can
be set separately.
Models with navigation system
In AUTO mode, the system adjusts each temperature
based on the information of the sunlight sensor and
the sun position updated by the navigation system’s
GPS.
You can set the temperature synchronously for the driver side and the passenger
side in synchronized mode.
1. Press the SYNC button.
u The system switches to synchronized mode.
2. Adjust the temperature using driver’s side temperature control dial.
Press the SYNC button to return to dual mode.
202
uuClimate Control System*uAutomatic Climate Control Sensors
Automatic Climate Control Sensors
The automatic climate control system is
equipped with sensors. Do not cover or spill
any liquid on them.
Sensor
Sensor
203
