Deutsch
EnglishDriving -> Speed limiter for your Peugeot 3008 2016-2023
Driving
Information displayed on the
instrument panel
Extended Traffic Sign
Recognition
6
For more information, refer to the
General recommendations on the use
of driving and manoeuvring aids.
3. Speed limit indication
4. Speed memorisation prompt
5. Current speed setting
Storing the speed setting
► Press button 2once to save the suggested
speed value.
This additional system recognises these road
signs and displays them on the instrument panel
if the appropriate display mode is selected:
– No entry: when entering a lane in the wrong
direction, an alert message, including the symbol
of this sign, is displayed on the instrument panel
(request to check the direction of traffic).
– Other signs: as you approach it, the symbol
of the corresponding sign is displayed on the
instrument panel.
A message is displayed, confirming the request.
► Switch on the speed limiter/cruise control.
The speed limiter/cruise control information is
displayed.
Upon detecting a sign suggesting a new speed
setting, the system displays the value and
"MEM" flashes for a few seconds, prompting you
to save it as a new speed setting.
The actual road signs always take priority
over the display from the system.
The signs must comply with the Vienna
Convention on road signs.
If there is a difference of less than 6 mph
(9 km/h) between the speed setting and
the speed displayed by the Speed Limit
Recognition and Recommendation, the
"MEM" symbol is not displayed.
► Press button 2again to confirm and save the
new speed setting.
The display then reverts to its previous state.
Activation / Deactivation
It is set via the Driving / Vehicle touch
screen menu.
Depending on the road conditions, several
speeds may be displayed.
131
Driving
Switching on/Pausing
4. Pause/resume speed limiter with the speed
setting previously stored
Speed limiter
For more information, refer to the
5. Depending on version:
General recommendations on the use
of driving and manoeuvring aids.
Display the speed thresholds saved using the
Memorising speeds function
or
Use the speed suggested by the Speed Limit
Recognition and Recommendation (MEM
display)
This system prevents the vehicle from
exceeding the speed programmed by the
driver (speed setting).
► Turn thumbwheel 1 to the "LIMIT" position
to select speed limiter mode; the function is
paused.
The speed limiter is switched on manually.
The minimum speed setting is 19 mph (30 km/h).
The speed setting remains in the system
memory when the ignition is switched off.
For more information on Memorising speeds
or the Speed Limit Recognition and
Recommendation, refer to the corresponding
sections.
Steering-mounted control
► If the limit speed setting is suitable (most
recent speed setting programmed in the system),
press button 4 to switch the speed limiter on.
► Pressing button 4 again temporarily pauses
the function.
Information displayed on
the instrument panel
When the speed setting remains below
the vehicle's speed for a prolonged
period of time, an audible warning is emitted.
Adjusting the limit speed
setting
6. Speed limiter on/pause status indication
7. Speed limiter mode selection indication
8. Programmed speed value
9. Speed suggested by the Speed Limit
recognition and recommendation system
(depending on version)
You do not have to switch the speed limiter on in
order to set the speed.
To modify the limit speed setting based on the
vehicle’s current speed:
► Briefly press button 2 or 3 to change the
value in steps of + or - 1 mph (1.6 km/h).
1. ON (LIMIT position)/OFF
2. Reduce the speed setting
3. Increase the speed setting
132
Driving
Have the system checked by a PEUGEOT
► Press and hold button 2 or 3 to change the
value in steps of + or - 5 mph (8 km/h).
To change the limit speed setting using
memorised speeds, via the touch screen:
► Press button 5 to display the memorised
speed settings.
► Press the touch screen button for the desired
speed setting.
The selection screen closes after a few
moments.
This setting becomes the new limit speed.
To modify the cruise speed setting based on the
speed suggested by the Speed Limit Recognition
and Recommendation, as shown on the
instrument panel:
► Press button 5 once; a message is displayed
to confirm the memorisation request.
► Press button 5 again to save the suggested
speed.
► Release the accelerator pedal to return to
below the speed setting.
When exceeding the speed is not due to the
driver's action (e.g. in case of a steep slope), an
audible signal is triggered immediately.
6
dealer or a qualified workshop.
Cruise control - Specific
recommendations
On a steep descent or in the event of
sharp acceleration, the speed limiter will
not be able to prevent the vehicle from
exceeding the speed setting.
If necessary, apply the brakes to control your
vehicle’s speed.
The cruise control function does not
guarantee compliance with the maximum
authorised speed and the safety distance
between vehicles, the driver remains
responsible for their driving.
In the interest of public safety, only use cruise
control if the traffic conditions enable vehicles
to drive at a steady speed and maintain an
adequate safety distance.
Remain vigilant while cruise control is
activated. If you press and hold one of the
speed setting modification buttons, your
vehicle may change speed very abruptly.
When descending a steep hill, the cruise
control system cannot prevent the vehicle
from exceeding the set speed. Brake if
necessary to control the vehicle speed.
On steep climbs or when towing, the set
speed may not be reached or maintained.
When the vehicle speed returns to the speed
setting level, the speed limiter operates again:
the speed setting display becomes fixed again.
The speed is immediately shown on the
instrument panel as the new speed setting.
Switching off
► Turn the thumbwheel 1 to the "OFF" position:
speed limiter information is no longer displayed.
Temporarily exceeding the
speed setting
► Fully depress the accelerator pedal past the
point of resistance.
Malfunction
Exceeding the programmed speed
setting
You can temporarily exceed the speed
setting by pressing the accelerator pedal (the
programmed speed flashes).
Dashes are displayed (flashing, initially, then
fixed) in the event of a speed limiter malfunction.
The speed limiter is temporarily deactivated and
the displayed speed setting flashes.
133
