Deutsch
EnglishDriving -> Speed Limit Recognition and Recommendation for your Peugeot 3008 2016-2023
Driving
If this is not the case, when the vehicle is
stationary, set the display to the required
units of speed so that it complies with what is
authorised locally.
In case of doubt, contact a PEUGEOT dealer
or a qualified workshop.
This system displays the maximum speed
authorised locally on the instrument panel, using:
– Speed limit signs detected by the camera.
– Speed limit information from the navigation
system’s mapping.
"MEM" button
– Signs indicating a shared traffic zone detected
by the camera.
Sign detected
Suggested speed
(calculated)
Memorising speeds
With this button, you can select a memorised
speed setting to use with the speed limiter or the
programmable cruise control.
For more information on the Speed limiter
or Cruise control, refer to the corresponding
section.
This function, used only for the speed limiter
and programmable cruise control, lets you
save speed settings that will subsequently be
proposed for the purpose of configuring these
two systems.
Entry into a shared
traffic zone
Without PEUGEOT
Connect Nav
10 mph or 20 km/h
(depending on
Example:
the units on the
You can memorise multiple speed settings for
each of the two systems.
By default, some speed settings are already
memorised.
instrument panel)
With PEUGEOT
Connect Nav
Display of the speed
in force in the country
you are driving in.
Speed Limit Recognition
and Recommendation
As a safety measure, the driver must only
change speed settings when stationary.
For more information, refer to the
General recommendations on the use
of driving and manoeuvring aids.
– Some supplementary traffic signs detected by
the camera.
Changing a speed setting
Speed settings can be activated,
deactivated, selected and changed in the
Driving / Vehicle touch screen menu.
128
Driving
The units for the speed limit (mph or
km/h) depend on the country you are
driving in.
This should be taken into account to ensure
you observe the speed limit.
For the system to work properly when
changing countries, the speed unit of the
instrument panel must match that of the
country you are driving in.
Supplementary
traffic sign detected
Display of
the speed
associated with
the supplementary
traffic sign
Supplementary
traffic sign detected
Display of
the speed
associated with
the supplementary
traffic sign
6
Speed limit when
raining
If the wiper control
stalk is in the
Speed limit for
vehicles with a
gross vehicle
weight or gross
train weight less
than 3.5 tonnes
56 mph (90 km/h)
(for example)
Examples:
"intermittent wipe"
or "automatic wipe"
position (in order
to activate the rain
sensor):
Automatic sign reading is a driving aid
system and does not always display the
correct speed limits.
68 mph (110 km/h)
(for example)
The speed limit signs present on the road
always take priority over those displayed by
the system.
The system is designed to detect signs that
conform to the Vienna Convention on road
signs.
Speed limit in case
of snow
If the outside
temperature is below
3°C:
19 mph (30 km/h)
(for example)
with a "snowflake"
symbol
Speed limit when
towing
If an approved towing
device is fixed to the
vehicle:
56 mph (90 km/h)
(for example)
Example:
Specific speed limits, such as those for
heavy goods vehicles, are not displayed.
The display of the speed limit on the
instrument panel is updated when passing
a speed limit sign intended for cars (light
vehicles).
Speed limit
applicable over a
certain distance
Example:
43 mph (70 km/h)
(for example)
Speed limit at
certain times of the
day
19 mph (30 km/h)
(for example)
with a "clock" symbol
Example:
Activation/Deactivation
By default, the system is automatically activated
at every engine start.
Navigation mapping should be regularly
updated in order to receive accurate
speed limit information from the system.
The settings are changed via the
Driving/Vehicle touch screen menu.
129
Driving
Information displayed on
the instrument panel
Recommendation
For a suggested maximum speed, the first time
that the vehicle exceeds it by more than 3 mph
(5 km/h) (e.g. 59 mph (95 km/h)), the speed is
displayed and flashes for 10 seconds (depending
on version).
In addition to Speed Limit Recognition and
Recommendation, the driver can select the
speed displayed as a speed setting for the speed
limiter or cruise control using the speed limiter or
cruise control 'store' button.
Operating limits
The system does not take account of reduced
speed limits, especially those imposed in the
following cases:
– Poor weather (rain, snow).
– Atmospheric pollution.
For more information on the Speed
limiter, Cruise control or Adaptive
cruise control, refer to the corresponding
sections.
1. Detected speed limit indication
or
2. End of speed limit indication
– Towing.
– Driving with a space-saver type spare wheel
or snow chains fitted.
Steering-mounted controls
– Tyre repaired using the temporary puncture
repair kit.
– Young drivers.
The system may not display the speed limit if it
does not detect a speed limit sign within a preset
period and in the following situations:
– Road signs that are obstructed, non-standard,
damaged or bent.
The system is active but is not detecting speed
limit information.
1. Speed limiter/cruise control mode selection
2. Memorise the speed setting
– Obsolete or incorrect maps.
On detecting speed limit information, the system
displays the value.
130
Driving
Information displayed on the
instrument panel
Extended Traffic Sign
Recognition
6
For more information, refer to the
General recommendations on the use
of driving and manoeuvring aids.
3. Speed limit indication
4. Speed memorisation prompt
5. Current speed setting
Storing the speed setting
► Press button 2once to save the suggested
speed value.
This additional system recognises these road
signs and displays them on the instrument panel
if the appropriate display mode is selected:
– No entry: when entering a lane in the wrong
direction, an alert message, including the symbol
of this sign, is displayed on the instrument panel
(request to check the direction of traffic).
– Other signs: as you approach it, the symbol
of the corresponding sign is displayed on the
instrument panel.
A message is displayed, confirming the request.
► Switch on the speed limiter/cruise control.
The speed limiter/cruise control information is
displayed.
Upon detecting a sign suggesting a new speed
setting, the system displays the value and
"MEM" flashes for a few seconds, prompting you
to save it as a new speed setting.
The actual road signs always take priority
over the display from the system.
The signs must comply with the Vienna
Convention on road signs.
If there is a difference of less than 6 mph
(9 km/h) between the speed setting and
the speed displayed by the Speed Limit
Recognition and Recommendation, the
"MEM" symbol is not displayed.
► Press button 2again to confirm and save the
new speed setting.
The display then reverts to its previous state.
Activation / Deactivation
It is set via the Driving / Vehicle touch
screen menu.
Depending on the road conditions, several
speeds may be displayed.
131
