Deutsch
EnglishLighting and visibility -> Night Vision for your Peugeot 3008 2016-2023
Lighting and visibility
not available (in "Night Vision" mode), the
conditions are met, an alert is triggered if there is
a risk of collision.
The permanent display disappears upon
switching off the ignition or if the conditions are
not met.
Activation / Deactivation
4
indicator lamp comes on in grey.
It is set via the Driving / Vehicle touch
If all operating conditions are met, the
indicator lamp comes on in green: the
display in the instrument panel (with "Night
Vision" mode selected) and the triggering of
alerts are available.
If certain operating conditions (speed or
temperature) are not met, the
indicator lamp comes on in orange: only the
display in the instrument panel is available (in
"Night Vision" mode).
screen menu.
Switching on / off
This system operates from a certain angle of
rotation of the steering wheel.
The system does not operate:
– below a certain angle of rotation of the
steering wheel.
Night Vision is a driving aid system that
cannot, under any circumstances,
replace the personal assessment of
night-time visibility and traffic conditions. .
In some conditions, the contrasts in
temperature are insufficient and the system
may not detect all dangers or, conversely,
it may give false warnings (e.g. engines of
lorries parked on the edge of the road).
– above 56 mph (90 km/h),
– when reverse gear is engaged.
Whilst the exterior light is too bright or the dipped
beam headlamps have not been switched on,
the alerts are not available.
Night Vision
Activation/Deactivation
This function is set via the Driving/
Vehicle touch screen menu.
Conditions for operation
– With the engine running and in Stop mode
of Stop & Start.
– Very low light conditions with dipped beam
headlamps on and in good working order.
– Temperature between -30°C and +28°C.
– Speed below 99 mph (160 km/h).
– Detection of animals taller than 0.50 m.
This system identifies and signals the presence
of pedestrians and animals in the driver's field
of vision, in low exterior light conditions, using
an infrared camera located at the front of the
vehicle.
Operation
Select the "Night vision" display mode for
the infrared camera image to be displayed
constantly on the instrument panel. When the
If the function is selected but the display
on the instrument panel and the alerts are
79
Lighting and visibility
– Camera masked by snow, mud or dust.
– Camera scratched after going through roller
car washes repeatedly.
– Very high outside temperature.
– At the top or bottom of a steep slope.
– On a very winding road.
Wiper control stalk
Before operating the wipers in wintry
conditions, clear any snow, ice or frost
from the windscreen and around the wiper
arms and blades.
– In a bend.
– After an impact which may have impaired the
camera settings or damaged it.
– After repainting of the grille outside of the
PEUGEOT dealer network or a qualified
workshop.
Do not operate the wipers on a dry
windscreen. In extremely hot or cold
weather, check that the wiper blades are not
stuck to the windscreen before operating the
wipers.
The camera detection range is between 15 m
(for pedestrians) and 200 m, depending on
visibility conditions.
The image provided by the camera is displayed
in shades of grey in the instrument panel; warm
objects appear brighter than cold objects.
If pedestrians or animals are detected, they
appear in yellow frames.
Maintenance
recommendations
The infrared camera has a wash nozzle
connected to the vehicle’s front screenwash
system.
This nozzle operates every 5th use of the
screenwash.
Regularly check that the camera is clean.
In bad weather, or in wintry conditions, ensure
that the camera is not covered with mud, ice or
snow.
After using an automatic car wash, you
may temporarily notice abnormal noises
and poorer wiping performance. You do not
need to replace the wiper blades.
If the system detects a risk of
collision with pedestrians or
animals, it triggers an alert: one of these symbols
appears on the instrument panel. The
corresponding silhouette is framed in red.
If the "Night Vision" display mode has not been
selected, the alert is triggered in the form of a
temporary window.
Windscreen wipers
In the event of an alert, the driver may act by
making an avoiding manoeuvre or by braking.
Malfunction
Operating limits
The following situations may interfere with
the operation of the system or prevent it from
working:
If the event of a malfunction, this warning
lamp comes on in orange on the
instrument panel, accompanied by the display of
a message.
► To select the wiping speed: raise or lower the
stalk to the desired position.
– Poor visibility conditions (falling snow, heavy
rain, thick fog).
Have it checked by a PEUGEOT dealer or a
qualified workshop.
80
