Deutsch
EnglishStarting and operating -> SI-DRIVE for your Subaru Forester 2019-2024
SI-DRIVE 329
insert a screwdriver into the hole, press
the shift lock release button using a
screwdriver, and then move the select
lever.
standstill. This phenomenon does not
indicate a malfunction.
7-8. SI-DRIVE
SI-DRIVE (SUBARU Intelligent Drive)
works to maximize engine performance,
control and efficiency.
This system consists of two modes:
Intelligent (I), Sport (S), and Sport Sharp
(S#). By operating the SI-DRIVE switches,
the character of the power unit changes.
If the select lever does not move after
performing the above procedure, the shift
lock system may be malfunctioning. Con-
tact a SUBARU dealer for an inspection as
soon as possible.
& Driving tips
& Intelligent (I) mode
CAUTION
! For smooth, efficient performance
driving
If the accelerator and brake pedals
are depressed at the same time,
driving torque may be restrained.
This is not a malfunction.
.
.
Always apply the foot or parking brake
when the vehicle is stopped in the “D” or
“R” position.
Make sure to apply the parking brake
when parking your vehicle. Do not hold
the vehicle with only the mechanical
friction of the transmission.
.
.
Do not keep the vehicle in a stationary
position on an uphill grade by using the
“D” position. Use the brake instead.
The engine may, on rare occasions,
knock when the vehicle rapidly accel-
erates or rapidly pulls away from a
The linear acceleration characteristic of
the Intelligent (I) mode is ideal for normal
driving usage.
The Intelligent (I) mode provides well-
balanced performance with greater fuel
– CONTINUED –
SI-DRIVE
330
efficiency and smooth driveability without
stress. Power delivery is moderate during
acceleration for maximum fuel efficiency.
This is ideal for around-town driving and
situations that do not require full power
output. It provides better control in difficult
driving conditions, such as slippery roads
or loose surfaces, due to gentler throttle
response.
& Sport Sharp (S#) mode (if
& SI-DRIVE switches
Type A SI-DRIVE switches
Type B SI-DRIVE switches
equipped)
! For maximum performance driving
& Sport (S) mode (if equipped)
! For all-around performance driving
For sports-minded drivers, the Sport
Sharp (S#) mode offers an exhilarating
level of engine performance and control.
The throttle becomes more responsive
regardless of the engine speed. Delivering
maximum driving enjoyment, this mode is
ideal for tackling twisting roads and for
merging or overtaking other vehicles on
the freeway with confidence.
The Sport (S) mode provides the engine
power desired by those who want to make
the driving experience their own personal
adventure.
.
To select the Intelligent (I) mode, press
the “I” switch.
Power steering 331
.
.
To select the Sport (S) mode, press the
“S” switch.
To select the Sport Sharp (S#) mode,
press the “S#” switch.
7-9. Power steering
CAUTION
When the power steering warning
light is illuminated, there may be
more resistance when the steering
wheel is operated. Drive carefully to
the nearest SUBARU dealer and
have the vehicle inspected immedi-
ately.
& Power steering warning light
NOTE
.
While the engine is cool, you cannot
change to Sport Sharp (S#) mode.
The next time you turn on the engine,
after you turned off the engine in the
Sport (S) mode (type A) or Sport
Sharp (S#) mode (type B), the
SI-DRIVE mode changes to the In-
telligent (I) mode.
If the CHECK ENGINE warning light/
malfunction indicator light illumi-
nates while the engine is running,
type A changes to the Sport (S)
mode, and type B remains in the
state that was in effect before the
warning light turned on. In this case,
it is not possible to change to
another mode.
.
NOTE
If the steering wheel is operated in the
following ways, the power steering
control system may temporarily limit
the power assist in order to prevent the
system components, such as the con-
trol computer and drive motor, from
overheating.
.
.
& Power steering system fea-
tures
.
The steering wheel is operated fre-
quently and turned sharply while the
vehicle is maneuvered at extremely
low speeds, such as while frequently
turning the steering wheel during
parallel parking.
The steering wheel remains in the
fully turned position for a long
period of time.
The vehicle is equipped with an electric
power steering system. When the ignition
switch is turned to the “ON” position, the
power steering warning light on the com-
bination meter illuminates to inform the
driver that the warning system is function-
ing properly. Then, if the engine started,
the warning light turns off to inform the
driver that the steering power assist is
operational.
If any of the SI-DRIVE indicators
blink, the SI-DRIVE system may be
malfunctioning. Contact your
SUBARU dealer.
.
At this time, there will be more resis-
tance when steering. However, this is
not a malfunction. Normal steering
force will be restored after the steering
– CONTINUED –
