Deutsch
EnglishWindows, glass and mirrors -> Adjusting the rearview mirror dimming function for your Volvo XC60 2017-2026
WINDOWS, GLASS AND MIRRORS
The rearview mirror instead has two sensors -
one pointing forward and one pointing rear-
ward - which work together to identify and
eliminate glare. The forward-pointing sensor
monitors ambient light, while the rearward-
pointing sensor monitors light from the head-
lights of following vehicles.
Adjusting the rearview mirror
dimming function
Adjusting the door mirrors
To improve visibility to the rear, the door mir-
rors need to be adjusted to the driver's height
and seating position. There are several auto-
matic settings that can also be connected to
the memory function buttons for the power
seat*.
Bright light entering the vehicle from behind,
e.g. from the headlights of following vehicles,
could reflect in the rearview mirror and door
mirrors and cause a glare. Use the dimming
function when light from behind is distract-
ing.
For the door mirrors to be equipped with auto-
dim, the rearview mirror must also be equip-
ped with auto-dim.
Controls used for door mirrors
Auto-dim
If bright light enters the vehicle from behind,
the door mirrors will automatically dim. Auto-
dim is always active when the engine is run-
ning, except when reverse gear is engaged.
If the sensors are obstructed by e.g. a
parking permit, transponder, sunshade or
objects on the seats or in the cargo com-
partment in a way that prevents light from
reaching the sensors, the auto-dim func-
tion in the door and rearview mirrors will
be reduced.
Adjustments to the sensitivity level will not
be noticeable immediately but will instead
take effect after a short period of time.
The sensitivity level for dimming will affect
both the rearview mirror and door mirrors.
Door mirror controls.
Related information
Rearview/door mirrors (p. 169)
The joystick in the drivers' door control panel
is used to adjust the position of the door mir-
rors. The ignition must be in at least mode I.
•
To change the dimming sensitivity level:
•
1.
Tap Settings in the Top view in the center
display.
1. Press the L button for the left door mirror
or R for the right door mirror. The button
will light up.
2. Tap My Car Mirrors and Convenience.
3.
Under Rearview Mirror Auto Dimming,
select Normal, Dark or Light.
2. Adjust the position using the joystick
located between the buttons.
170
* Option/accessory.
WINDOWS, GLASS AND MIRRORS
Tilting when parking3
The door mirrors can be tilted down to help
give the driver a better view along the sides of
the vehicle, e.g. of the curb when parking.
3. Press the L or R button again. The light in
Automatic folding when the vehicle is
locked*
The door mirrors can automatically fold in
when the vehicle is locked and open when the
vehicle is unlocked using the remote key. If
the mirrors have been folded in manually, they
must be folded out manually as well.
the button will go out.
Automatically folding door mirrors*
The door mirrors can be automatically folded
when driving or parking in tight spaces.
–
Select reverse gear and press the L or R
mirror button.
1. Press the L and R buttons at the same
Please note that the button may need to be
pressed twice depending on settings. When
the door mirror is tilted down, the light in the
button will flash. When reverse gear is
engaged, the door mirrors will automatically
start to move after 3 seconds and will reach
their original position after about 8 seconds.
time.
1.
Tap Settings in the center display's Top
view.
2. Release the buttons after about 1 second.
The mirrors will automatically stop when
they are completely folded in.
2. Tap My Car Mirrors and Convenience.
3.
Select Fold Mirror When Locked to acti-
vate/deactivate.
Open the mirrors by pressing L and R at the
same time. The mirrors will automatically stop
when they are completely open.
Related information
•
Automatically tilting when parking3
With this setting, the door mirrors will auto-
matically tilt down when reverse gear is
engaged. The folded position is preset and
cannot be adjusted.
Rearview/door mirrors (p. 169)
Resetting the mirrors' position
A mirror that has been moved out of position
manually (e.g. hit or bumped into) must be
electrically returned to its normal position for
automatic folding* to function properly.
•
Storing positions for seats, mirrors and
head-up display* (p. 186)
•
•
1.
Tap Settings in the center display's Top
1. Fold in the mirrors by pressing the L and R
view.
Activating and deactivating the heated
rear window and door mirrors (p. 219)
buttons at the same time.
2. Tap My Car Mirrors and Convenience.
2. Open them again by pressing the L and R
3.
Under Exterior Mirror Tilt at Reverse,
select Off, Driver, Passenger or Both to
activate/deactivate and to select which
mirror to tilt.
buttons at the same time.
3. Repeat the above procedure as needed.
The mirrors are now reset to their original
positions.
To immediately return the door mirrors to their
original position, press the L or R button
twice.
3
Only on models equipped with a power driver's seat with memory buttons*.
* Option/accessory. 171
