Deutsch
EnglishWindows, glass and mirrors -> Using the windshield wipers for your Volvo XC60 2017-2026
WINDOWS, GLASS AND MIRRORS
Keyless locking and unlocking* (p. 252)
•
•
Wiper blades and washer fluid
Using the windshield wipers
The wipers and the washer fluid are designed
to improve visibility and the headlight pat-
tern.
Washer fluid direct from the wiper blades and
heating* of the wiper blades gives improved
vision.
The windshield wipers are designed to clean
the windshield. The right-side steering wheel
lever is used to adjust windshield wiper set-
tings.
Locking and unlocking using the remote
key (p. 238)
When there is approximately 1 liter (1 qt) of
washer fluid remaining, a message to refill will
appear in the instrument panel.
Related information
•
Using the windshield and headlight wash-
ers (p. 179)
•
Using automatic rear window wiping
when backing up (p. 181)
•
•
•
Right-hand steering wheel lever.
Using the rain sensor's memory function
(p. 178)
The thumb wheel is used to set rain sen-
sor sensitivity and interval wiper speed.
Using the rear window wiper/washer
(p. 180)
Single sweep
Move the lever down and release for a
single sweep.
Filling washer fluid (p. 627)
•
•
Putting the wiper blades in service posi-
tion (p. 626)
Wipers off
Move the lever to position 0 to turn off
the windshield wipers.
Replacing windshield wiper blades
(p. 625)
•
Changing rear window wipers (p. 624)
•
•
176
* Option/accessory.
WINDOWS, GLASS AND MIRRORS
Using automatic rear window wiping
when backing up (p. 181)
Interval wipers
•
Using the rain sensor
Move the lever upward to put the wip-
The rain sensor monitors the amount of water
on the windshield and automatically starts
the windshield wipers. Rain sensor sensitivity
can be adjusted using the thumb wheel on
the right-hand steering wheel lever.
ers in interval wiping mode. Set the
number of sweeps per time unit with the
thumb wheel when interval wipers are
selected.
•
•
Using the rain sensor's memory function
(p. 178)
Using the rear window wiper/washer
(p. 180)
•
Continuous wipers
Move the lever upward for the wipers
to operate at normal speed.
Filling washer fluid (p. 627)
•
•
Putting the wiper blades in service posi-
tion (p. 626)
Move the lever upward again for the
wipers to operate at high speed.
Replacing windshield wiper blades
(p. 625)
•
•
Changing rear window wipers (p. 624)
Before activating the wipers, make sure
that the wiper blades are not frozen in
place and that any snow or ice on the
windshield and rear window has been
scraped away.
Right-hand steering wheel lever.
Rain sensor button
Thumb wheel, sensitivity/interval wiper
speed
Use plenty of washer fluid when the wipers
clean the windshield. The windshield must
be wet when the windshield wipers are
working.
When the rain sensor is activated, the
rain sensor symbol will be displayed in the
instrument panel.
Activating the rain sensor
Related information
When the rain sensor is activated, the engine
must be running or the ignition in mode I or II
while the windshield wiper lever is in position
0 or in the single sweep position.
•
Using the windshield and headlight wash-
ers (p. 179)
•
}}
177
