Deutsch
EnglishOpening and closing -> Wind deflector for your BMW 6 Series 2011-2017
Controls
Opening and closing
4. Install the wind deflector on the vehicle
with the right retaining pin and the two rear
ones in the corresponding openings.
Wind deflector
The concept
The wind deflector reduces the air movement
in the vehicle interior when driving with the
convertible top down.
Installation
1. Remove wind deflector from the protective
jacket and unfold it.
5. Push the left retaining pin into the provided
opening until it latches.
2. Press the upper and lower parts together
until the latch engages.
6. Flip up the top half of the wind deflector.
3. Push out the right retaining pin until the
latch engages and flip out the two rear re‐
taining pins.
Do not tilt the front seat backrest too far
back
Do not tilt the front seat backrest too far back
with the wind deflector installed if the seat is to
be moved all the way back. Otherwise, the
wind deflector will be damaged.◀
Removing
Proceed in reverse sequence.
54
Opening and closing
Controls
To release the two lateral retaining pins, pull
the corresponding handle forward a little and
them pull it to the side.
Folding up
On the left side, pull the handle of the retaining
pin on the wind deflector all the way back and
release the latch. Fold in top and bottom part.
55
