Deutsch
EnglishTransporting children safely -> LATCH child restraint system for your BMW 6 Series 2011-2017
Controls
Transporting children safely
LATCH child restraint system
LATCH: Lower Anchors and Tether for Chil‐
dren.
Before installing LATCH child
restraint systems
Pull the belt away from the area of the child re‐
straint system.
Note
Follow manufacturer's information for
LATCH child restraint systems
Assembly of LATCH child restraint
systems
1. Mount the child restraint system; refer to
the user's manual of the system.
To mount and use the LATCH child restraint
systems, observe the operating and safety in‐
formation from the system manufacturer; oth‐
erwise, the level of protection may be re‐
duced.◀
2. Ensure that both LATCH anchors are prop‐
erly connected.
Upper LATCH retaining strap
Mounts for the lower LATCH anchors
For Canadian customers Only.
The lower anchors may be used to attach the
CRS to the vehicle seat up to a combined child
and CRS weight of 65 lb/30 kg when the child
is restrained by the internal harnesses.
The following statement is required by Trans‐
port Canada:
This vehicle is not equipped with user-ready
tether anchorages. As such neither a child re‐
straint system, nor a booster cushion, requirer‐
ing the use of a tether strap can be properly
secured in the vehicle.
Note
Properly engage the lower LATCH an‐
chors
Make sure that the lower LATCH anchors have
properly engaged and that the child restraint
system is resting snugly against the backrest;
otherwise, the degree of protection may be re‐
duced.◀
Position
The corresponding symbol shows the
mounts for the lower LATCH anchors.
Seats equipped with lower anchors are
marked with a pair, 2, of LATCH sym‐
bols. It is not recommended to use the
inner lower anchors of standard outer
LATCH positions to fasten a child restraint
system on the middle seat. Use the vehicle
seat belt instead for the middle seat.
68
