Deutsch
EnglishWheels and tires -> Run-flat tires for your BMW 6 Series 2011-2017
Mobility
Wheels and tires
into the tires, which seals the damage from the
inside.
Storage
Store wheels and tires in a cool, dry place with
as little exposure to light as possible.
The compressor can be used to check the tire
inflation pressure.
Always protect tires against all contact with oil,
grease and fuels.
Hints
Do not exceed the maximum tire inflation pres‐
sure indicated on the side wall of the tire.
▷
▷
Follow the instructions on using the Mobi‐
lity System found on the compressor and
sealant container.
Use of the Mobility System may be ineffec‐
tive if the tire puncture measures approx.
1/8 in/4 mm or more.
Run-flat tires
Label
▷
▷
▷
Contact the nearest service center if the
tire cannot be made drivable.
If possible, do not remove foreign bodies
that have penetrated the tire.
Pull the speed limit sticker off the sealant
container and apply it to the steering
wheel.
▷
The use of a sealant can damage the TPM
wheel electronics. In this case, have the
electronics checked at the next opportu‐
nity and have them replaced if needed.
RSC label on the tire sidewall.
The wheels consist of tires that are self-sup‐
porting, to a limited degree, and possibly spe‐
cial rims.
Enclosed areas
Do not let the engine run in enclosed
The support of the sidewall allows the tire to
remain drivable to a restricted degree in the
event of a tire inflation pressure loss.
areas, since breathing in exhaust fumes may
lead to loss of consciousness and death. The
exhaust gases contain carbon monoxide, an
odorless and colorless but highly toxic gas.◀
Follow the instructions for continued driving
with a flat tire.
Storage
Changing run-flat tires
The Mobility System is located under the
cargo floor panel.
For your own safety, only use run-flat tires. No
spare tire is available in the case of a flat tire.
Your service center will be glad to advise you.
Mobility System
The concept
With the Mobility System, minor tire damage
can be sealed quickly to enable continued
travel. To accomplish this, sealant is pumped
208
