Deutsch
EnglishWindows for your Ford Fiesta 2017-2023
Windows
3. Lift and hold the switch until the
OPENING AND CLOSING THE
WINDOWS
window is fully closed. Keep the switch
held for a few seconds.
4. Press and hold the switch until the
window is fully open. Keep the switch
pressed for a few seconds.
5. Lift and hold the switch until the
window is fully closed. Keep the switch
held for a few seconds.
WARNING: Do not leave children
unattended in your vehicle and do not
let them play with the power windows.
Failure to follow this instruction could
result in personal injury.
Note: Repeat the procedure if the window
WARNING: When closing the
power windows, verify they are free of
obstruction and make sure that children
and pets are not in the proximity of the
window openings.
does not close when you use one-touch.
GLOBAL OPENING AND
CLOSING
Press the control to open the
window. Lift the control to close
the window.
What Is Global Opening and
Closing
You can use the remote control to operate
the windows with the ignition off.
Note: The power windows operate with the
ignition on, and for several minutes after you
switch the ignition off or until you open a
front door.
To reduce wind noise or pulsing noise when
one window is open, slightly open the
opposite window.
Using Global Opening
1. Press and release the unlock button on
the remote control.
2. Press and hold the unlock button on
the remote control.
One-Touch Open
3. Release the button when the windows
Fully press the control and release it. Press
and moonroof start to open.
again or lift it to stop the window.
Note: The moonroof stops in the vent
One-Touch Close
position.
Fully lift the control and release it. Press
Press the lock or the unlock button on the
again or lift it to stop the window.
remote control to stop global opening.
Note: You can use global opening for a
short period of time when you unlock your
vehicle using the remote control.
Resetting One-Touch Close
Carry out all steps within 30 seconds of
starting the sequence.
1. Close the window.
Switching Global Opening On and
Off
2. Press and hold the switch until the
window is fully open. Keep the switch
pressed for a few seconds.
1. Using the information display controls
on the steering wheel, select Settings.
79
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Windows
2. Select Vehicle settings.
3. Select Windows.
Overriding Window Bounce-Back
4. Switch Global open on or off.
WARNING: If you override
bounce-back, the window does not
reverse if it detects an obstacle. Take
care when closing the windows to avoid
personal injury or damage to your
vehicle.
Using Global Closing
WARNING: When closing the
power windows, verify they are free of
obstruction and make sure that children
and pets are not in the proximity of the
window openings.
1. Close the window until it reaches the
point of resistance and let it reverse.
2. Lift the control within two seconds to
override bounce-back and close the
window. Bounce-back is now disabled
and you can close the window
manually.
1. Press and hold the lock button on the
remote control.
2. Release the button when the windows
and moonroof start to close.
Note: The window goes past the point of
resistance and you can fully close it.
Press the lock or the unlock button on the
remote control to stop global closing.
Note: Bounce-back is on during global
closing. See What Is Window
Bounce-Back (page 80).
Note: If the window does not close, have
your vehicle checked as soon as possible.
Resetting Window Bounce-Back
WARNING:Bounce-back is off until
you reset the memory. Take care when
closing the windows to avoid personal
injury or damage to your vehicle.
1. Using the information display controls
on the steering wheel, select Settings.
2. Select Vehicle settings.
3. Select Windows.
4. Switch Global close on or off.
If you have disconnected the battery, you
must reset the bounce-back memory
separately for each window.
Carry out all steps within 30 seconds of
WINDOW BOUNCE-BACK
What Is Window Bounce-Back
starting the sequence.
1. Close the window.
2. Press and hold the switch until the
window is fully open. Keep the switch
pressed for a few seconds.
3. Lift and hold the switch until the
window is fully closed. Keep the switch
held for a few seconds.
The window stops and reverses if it detects
an obstruction when closing.
80
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Windows
4. Press and hold the switch until the
window is fully open. Keep the switch
pressed for a few seconds.
5. Lift and hold the switch until the
window is fully closed. Keep the switch
held for a few seconds.
Note: Repeat the procedure if the window
does not close when you use one-touch.
LOCKING THE REAR WINDOW
CONTROLS
Press the control to lock or
unlock the rear window controls.
It illuminates when you lock the
rear window controls.
81
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
