Deutsch
EnglishInstruments and Controls -> Indicator Lights for your Honda CR-V 1995-2000
Main Menu
Table of Contents
Indicator Lights
The instrument panel has many
indicators to give you important
information about your vehicle.
HIGH BEAM INDICATOR
TAILGATE-OPEN INDICATOR
CHARGING SYSTEM
INDICATOR
SEAT BELT
REMINDER LIGHT
The U.S. instrument panel is
shown. Differences for the Canadian
models are noted in the text.
*
LOW OIL
PRESSURE
INDICATOR
LOW FUEL
INDICATOR
SUPPLEMENTAL
RESTRAINT SYSTEM
INDICATOR
CRUISE CONTROL
INDICATOR
ANTI-LOCK BRAKE
SYSTEM INDICATOR
MALFUNCTION
INDICATOR LAMP
PARKING BRAKE AND BRAKE
SYSTEM INDICATOR'
Instruments and Controls
Main Menu
Table of Contents
Indicator Lights
U.S.
Canada
Low Oil Pressure
Indicator
The engine can be severely damaged
if this light flashes or stays on when
the engine is running. For complete
information, see page 264 .
Parking Brake and
Brake System
Indicator
Supplemental Restraint
System Indicator
This indicator lights when you turn
the ignition switch ON (II). If it
comes on at any other time, it
indicates a problem in the
SRS
BRAKE
This light has two functions:
1. It lights as a reminder that you
have not released the parking
brake. Driving with the parking
brake applied can damage the
brakes and tires, and cause the
ABS to turn off (see page 167 ).
supplemental restraint system. For
complete information, see page 47 .
Charging System
Indicator
If this light conies on when the
engine is running, the battery is not
being charged. For complete
information, see page 265 .
Seat Belt Reminder Light
This indicator lights when you turn
the ignition switch ON (II). It is a
reminder to you and your passengers
to protect yourselves by fastening
the seat belts. A beeper also sounds
if you have not fastened your seat
belt.
2. If it remains lit after you release
the parking brake while the engine
is running, or comes on while
driving, it can indicate a problem
in the brake system. For complete
information, see page 267 .
Malfunction Indicator
Lamp
See page 266.
If you do not fasten your seat belt,
the beeper will stop after a few
seconds but the light stays on until
you do. Both the light and the beeper
stay off if you fasten your seat belt
before turning on the ignition.
Instruments and Controls
Main Menu
Table of Contents
Indicator Lights
U.S.
Canada
Anti-lock Brake
System (ABS)
Indicator
High Beam Indicator
ABS
Turn Signal and Hazard Warning
Indicators
This light comes on with the high
beam headlights. See page 60 for
information on the headlight
controls.
Only on models equipped with ABS (see
page 165)
The left or right turn signal light
blinks when you signal a lane change
or turn. If the light does not blink or
blinks rapidly, it usually means one
of the turn signal bulbs is burned out
(see page 233 ). Replace the bulb as
soon as possible, since other drivers
cannot see that you are signalling.
This light normally comes on when
you turn the ignition switch ON (II)
and goes off after the engine starts.
If it comes on at any other time,
there is a problem in the ABS. If this
happens, take the vehicle to your
dealer to have it checked. With the
light on, your vehicle still has normal
braking ability but no anti-lock.
On Canadian models, this indicator
comes on with reduced brightness
when the Daytime Running Lights
(DRL) are on (see page 60).
Cruise Control Indicator
CRUISE
CONTROL
When you turn on the Hazard
Warning switch, both turn signal
lights blink. All turn signals on the
outside of the vehicle should flash.
This lights when you set the cruise
control. See page 66 for information
on operating the cruise control.
Low Fuel Indicator
This light comes on as a reminder
that you must refuel soon.
Tailgate-open Indicator
This light comes on if the tailgate is
not closed tightly.
Instruments and Controls
