Deutsch
EnglishInstruments and Controls -> Seats for your Honda CR-V 1995-2000
Main Menu
Table of Contents
Keys and Locks, Seats
Glove Box
Front Seat Adjustments
See pages 12 — 14 for importantsafety
information and warnings about how to
properly position seats and seat-backs.
An open glove box can cause
serious injury to your passenger
in a crash, even if the
passenger is wearing the seat
belt.
Make all seat adjustments before
you start driving.
Always keep the glove box
closed while driving.
Open the glove box by pulling the
bottom of the handle. Close it with a
firm push. Lock or unlock the glove
box with the master key.
CONTINUED
Instruments and Controls
Main Menu
Table of Contents
Seats
Driver's Seat Height Adjustment
To change the angle of the seat-back,
pull up on the lever on the outside of
the seat bottom. Move the seat-back
to the desired position and release
the lever. Let the seal-back latch in
the new position.
To adjust the seat forward and
backward, pull up on the lever under
the seat cushion's front edge. Move
the seat to the desired position and
release the lever. Try to move the
seat to make sure it is locked in
position.
The height of your driver's seat is
adjustable. Turn the front dial on the
outside of the seat cushion to raise
the front of the seat bottom and turn
the rear dial to raise the rear.
Make all seat adjustments before
you start driving.
Instruments and Controls
Main Menu
Table of Contents
Seats
Head Restraints
See page 14 for important safety
information and a warning about how to
properlyposition the head restraints,
To remove a head restraint for
cleaning or repair, pull it up as far as
it will go. Push the release button
and pull the restraint out of the seat-
back.
The head restraints help protect you
and your passengers from whiplash
and other injuries. They are most
effective when you adjust them so
the back of the occupant's head rests
against the center of the restraint. A
taller person should adjust the
RELEASE BUTTON
restraint as high as possible.
The head restraints adjust for height.
You need both hands to adjust the
restraint. Do not attempt to adjust it
while driving. To raise it, pull upward.
To lower the restraint, push the
release button sideways and push
the restraint down.
Instruments and Controls
Main Menu
Table of Contents
Seats
Rear Seat-back Adjustment
Rear Seat Armrest
See pages 12 — 14 for important safely
information and warnings about how to
properly position seals and seat-backs.
The angle of the rear seat-backs can
be adjusted separately. To change
the angle of the seat-back, pull up on
the knob on the top of the seat-back.
Move the seat-back to the desired
position, then release the knob.
Make sure the seat-back latches in
the new position.
The rear seat armrest is located at
the center of the rear seat. Pivot it
down to use it.
Instruments and Controls
Main Menu
Table of Contents
Seats
Reclining the Front and Rear
Seat-backs
EX m odel
3. Pull up the lever on the side of the
rear seat. Lift the rear edge of the
seat bottom until the seat latches.
You can recline the seat-backs on the
front and rear seats to make a large
cushioned area. To do this:
2. Lift the slide lever and slide the
front seat forward as far as it will
go. Pull up the seat-back angle
adjustment lever, then pivot the
seat-back backward. Release the
lever when the seat-back is even
with the cushion on the rear seat.
1. Remove the front seat head
restraint and put it in the pocket of
the seat-back.
CONTINUED
Instruments and Controls
Main Menu
Table of Contents
Seats
Folding Rear Seat
The left and right halves of the rear
seat can be folded up separately to
create more cargo space.
Reverse this procedure to return the
seats to their upright positions.
Make sure you install the head
restraints, and that the seats are
locked securely in place before
driving.
4. Pull up on the knob on top of the
seat-back and pivot the rear seat-
back backward. Release the knob
when the seat-back is reclined as
far as it will go.
1. Store the latch plate for the center
lap belt by rolling up the belt and
pushing it into the seat pocket.
Instruments and Controls
Main Menu
Table of Contents
Seats
STRAP
2. Pull the strap to release the seat
bottom. Pivot the seat bottom
forward.
Put the head restraint behind the
seat bottom as shown.
Pass the fastening strap through the
hole of the head restraint and fasten
it with the velcro strap.
3. Remove the head restraint and
pull up on the knob on the top of
the seat-back. Pivot the seat-back
forward.
Reverse this procedure to return the
seat to the upright position. Make
sure that the seat is locked securely
before driving.
CONTINUED
Instruments and Controls
